Author Topic: Recoil pad for CZ Drake  (Read 3114 times)

0 Members and 1 Guest are viewing this topic.

Offline NewSport

  • Newbie
  • *
  • Posts: 2
Recoil pad for CZ Drake
« on: June 17, 2020, 11:49:30 PM »
Just purchased a CZ Drake Southpaw and love it ... BUT, need to increase length-of-pull. Is there a pre-fit recoil pad that I can use to replace stock pad? Slip-on pads move and turn too much.

Offline kilmal

  • Newbie
  • *
  • Posts: 1
Re: Recoil pad for CZ Drake
« Reply #1 on: January 11, 2021, 02:54:28 PM »
Hi - I just got a Drake in 12ga. Going to need a butt pad too that fits well and increases the length.

Have you found one that works well? If so, share with me the details?

THANKS!

Offline BDRG79

  • Newbie
  • *
  • Posts: 1
Re: Recoil pad for CZ Drake
« Reply #2 on: January 19, 2021, 03:47:35 PM »
I also Just ordered a drake and am looking for a butt pad as well.

If you could measure the butt area of the stock, width at its widest and length and send that to me. I'll find the right size for us.

Offline Mr Smith

  • Newbie
  • *
  • Posts: 2
Re: Recoil pad for CZ Drake
« Reply #3 on: January 28, 2021, 12:45:08 PM »
Grind to fit limbsaver, pachmayr, or kick eez. I put a grind to fit limbsaver on my Drake. added 3/4" to the LOP. Recoil doesn't hurt anymore since that upgrade. Obviously its gonna take effort to fit one to your gun. You will need to attach it and then mark the recoil pad so you know where to grind off. might be worth the investment to get yourself a belt sander. I bought a belt sander just for this purpose from harbor freight. I've used it for other things since, but originally was bought for fitting the recoil pad.

It's worth the investment to make the gun more comfortable to shoot.

Offline cristald89

  • Newbie
  • *
  • Posts: 1
Re: Recoil pad for CZ Drake
« Reply #4 on: June 25, 2021, 02:19:35 PM »
Thought I share this here; I wanted a new pad as well, not necessarily to increase length of pull but for less felt recoil.
That being said, I did not want to mess with Grind to Fit options and have to go purchase the necessary tools, although I do love a good excuse to go to Harbor Freight.

I found that LimbSavers Classic Precision-Fit Pad PT#10818 fits well enough to not have to do any modifications to the stock or the pad.
I did enlarge the mounting holes in the Pad in an effort to slightly better center the pad, but that was nothing compared to the Grind to Fit effort.


Offline CJB

  • Newbie
  • *
  • Posts: 18
Re: Recoil pad for CZ Drake
« Reply #5 on: July 03, 2021, 01:32:35 PM »
http://www.kick-killer-recoil-pads.com/kick-killer-slip-on-recoil-pad-with-lace-up-closure/

Those aint so bad.  Got one on my Bobwhite.   Forget which size, but it was only a tad oversize.

 

anything