Polished stainless P-01

[tgoldie00]

Mine is on the way.
$760+$45 shipping.

Miami Armory in Dayton Ohio.
They have 5 left out of the shipment of 6.
Put money down on it on September 20th.
What is a decent photo hosting page?
Photobucket is terrible now.

Hahaha no they don?t.....
I am a regular customer there. They told me about the one going to GA, so I can only assume it?s yours! Congrats. Much much better in person when the factory oil is wiped off!

[NCTURBOS]

Just picked one up from Bud's, $713 free shipping...

Should be at my FFL in 2-3 days!

K.

[Mercs]

Just picked one up from Bud's, $713 free shipping...

Should be at my FFL in 2-3 days!

K.

Congrats on that score! Good heads up on a deal too


Sent from my iPhone using Tapatalk

[dmleininger]

Just bit the bullet (no pun intended) on the Bud's deal.  Can't wait to see it.

[Mercs]

I jumped on the buds gun too. Then I tried to cancel my order with Hoosier Armory in Indiana since it was $100 more and my check just got there today, but the owner wouldn?t let me cancel and wanted to charge me a restocking fee for all the ?going above and beyond? he did by talking to me on the phone for 2 minutes to take my order on Saturday. LMAO I hate when LGS act like they?re doing you a big favor when selling you something for a premium. There?s plenty of places online with much cheaper prices, and much better service.


Sent from my iPhone using Tapatalk

[Scarlett Pistol]

I jumped on the buds gun too. Then I tried to cancel my order with Hoosier Armory in Indiana since it was $100 more and my check just got there today, but the owner wouldn?t let me cancel and wanted to charge me a restocking fee for all the ?going above and beyond? he did by talking to me on the phone for 2 minutes to take my order on Saturday. LMAO I hate when LGS act like they?re doing you a big favor when selling you something for a premium. There?s plenty of places online with much cheaper prices, and much better service.


Sent from my iPhone using Tapatalk

Ha, some people think too highly of the value of their time when they are inconvenienced... Nice score! I'll swap ya a 99021 for your stainless version... 

[Mercs]

I jumped on the buds gun too. Then I tried to cancel my order with Hoosier Armory in Indiana since it was $100 more and my check just got there today, but the owner wouldn?t let me cancel and wanted to charge me a restocking fee for all the ?going above and beyond? he did by talking to me on the phone for 2 minutes to take my order on Saturday. LMAO I hate when LGS act like they?re doing you a big favor when selling you something for a premium. There?s plenty of places online with much cheaper prices, and much better service.


Sent from my iPhone using Tapatalk

Ha, some people think too highly of the value of their time when they are inconvenienced... Nice score! I'll swap ya a 99021 for your stainless version...  [emoji63]

The best part... the lady who answered said Rich the owner wasn?t there... then when I started explaining the situation that I found the same gun $100 cheaper, sure enough Richie started yelling from the background how he went above and beyond. Idc he?ll run himself out of business with that attitude and poor service. If you want to work a trade, I?m game btw. Just know I will have $845 into the gun from Indiana after transfer fees and shipping


Sent from my iPhone using Tapatalk

[Sango]

Congrats to everyone on the purchases!!! I got mine out to the range today, and am glad I took the plunge. I absolutely love my new P01.

[tgoldie00]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

[Mercs]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

[GBCZ]

Just ordered one myself.  I'm still kicking myself for letting a gloss blue 75B from 2013 go, but another oddball sort of makes up for it.

[tgoldie00]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

Edit: no-go. Slide milling is different. Stainless slide will mount the aluminum frame (but won?t function due to no disconnect), Black frame wind mount to stainless slide due to milling differences (again, disconnect related).   

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

[Mercs]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

[tgoldie00]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy SP01 barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

Thanks for the link, see notes (edits) above.

[Mercs]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy SP01 barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

Thanks for the link, see notes (edits) above.

Ah that?s a shame. Will the SLC slide start on the SS rails at all?


Sent from my iPhone using Tapatalk