Polished stainless P-01

[GBCZ]

Well, this might now qualify - but it's my "semi compact" two tone 75B w/ the PCR slide..

[tgoldie00]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy SP01 barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

Thanks for the link, see notes (edits) above.

Ah that?s a shame. Will the SLC slide start on the SS rails at all?


Sent from my iPhone using Tapatalk

It will start as the frame dimensions are the same...fit there is fine. See pic below side by side from the rear...it will make way more sense...

[ViperM]

Just got mine.

[Mercs]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy SP01 barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

Thanks for the link, see notes (edits) above.

Ah that?s a shame. Will the SLC slide start on the SS rails at all?


Sent from my iPhone using Tapatalk

It will start as the frame dimensions are the same...fit there is fine. See pic below side by side from the rear...it will make way more sense...

So if you took the sear cage out would it fit? Thx for the pics! More pls lol


Sent from my iPhone using Tapatalk

[tgoldie00]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy SP01 barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

Thanks for the link, see notes (edits) above.

Ah that?s a shame. Will the SLC slide start on the SS rails at all?


Sent from my iPhone using Tapatalk

It will start as the frame dimensions are the same...fit there is fine. See pic below side by side from the rear...it will make way more sense...

So if you took the sear cage out would it fit? Thx for the pics! More pls lol


Sent from my iPhone using Tapatalk

Ok this is all I can do tonight...lol

Slide cuts:

Frames:

Fits but won?t function:

Doesn?t fit, wouldn?t function as-is:

[Mercs]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy SP01 barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

Thanks for the link, see notes (edits) above.

Ah that?s a shame. Will the SLC slide start on the SS rails at all?


Sent from my iPhone using Tapatalk

It will start as the frame dimensions are the same...fit there is fine. See pic below side by side from the rear...it will make way more sense...

So if you took the sear cage out would it fit? Thx for the pics! More pls lol


Sent from my iPhone using Tapatalk

Ok this is all I can do tonight...lol

Slide cuts:

Frames:

Fits but won?t function:

Doesn?t fit, wouldn?t function as-is:

Thx! I think it?s just the FPB holding you up. We could have something here. Those guns are stunning bro just wanna say congrats on having both


Sent from my iPhone using Tapatalk

[tgoldie00]

Oh....and the happy new couple together!

[tgoldie00]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy SP01 barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

Thanks for the link, see notes (edits) above.

Ah that?s a shame. Will the SLC slide start on the SS rails at all?


Sent from my iPhone using Tapatalk

It will start as the frame dimensions are the same...fit there is fine. See pic below side by side from the rear...it will make way more sense...

So if you took the sear cage out would it fit? Thx for the pics! More pls lol


Sent from my iPhone using Tapatalk

Ok this is all I can do tonight...lol

Slide cuts:

Frames:

Fits but won?t function:

Doesn?t fit, wouldn?t function as-is:

Thx! I think it?s just the FPB holding you up. We could have something here. Those guns are stunning bro just wanna say congrats on having both


Sent from my iPhone using Tapatalk

Many many thanks. We have some serious CZ lovers in these parts at a local shop...they aren?t even an official CZ retailer and get more great CZs than just about anywhere I have seen....and unfortunately for me they know who to call.

[Mercs]

Took mine out tonight. 150 rounds through the pipe, no issues. The trigger isn?t quite as great as my SLC, but honestly it?s not bad at all! I?m sure it will smooth out with some use, but even the double is completely manageable and tame...reminds me of my MK25 DA/SA quite a bit.

Random question...my SLC has the metal guide rod, and obviously the HP stainless has plastic. Realistically speaking, is there an actual reason to upgrade? My mind tells me know, and my faulty logic tells me that is because the beefier stainless frame (versus my SLC which is aluminum) absorbs more recoil due to its mass, thus the relative flexibility of the plastic is a non-issue.

Or I?m way off my rocker...anyone swap theirs out yet?

Thanks! Glad to see some great folks latching on to these!

I have one already to put in mine simply because it?s a stainless gun, and I just think the plastic guide rod will look out of place on such a fine piece. It prolly won?t affect performance at all. I always get ahead of myself. I ordered a set of Shadow 2 safeties from CZ USA this morning, in anticipation. I?m already thinking to refinish the safeties in hard chrome and a Shadow 2 mag release and put them on it.

Out of curiosity, since you have both, will the Shadow compact slide work on the stainless P-01 frame?


Sent from my iPhone using Tapatalk

I haven?t checked but I will (and get a ?two-tone? pic up for grins....). Even if they fit, keep in mind the SLC has no Firing Pin disconnect, so they are a little different.

What?s the metal GR part # and where did you grab it if you don?t mind me asking?

I got it from CGW. I like the profile on theirs best.
https://cajungunworks.com/product/74040-304ss-precision-recoil-spring-guide-rod/

Please do post a pic of u can get the SLC slide on there. You could potentially swap out the sear cage, etc. There?s also the matter of the fancy SP01 barrel in the SLC and whether that will cooperate in the steel frame. I?m so curious, because I so wish CZC made the SLC with a steel frame instead of alloy. I would already have one if they did


Sent from my iPhone using Tapatalk

Thanks for the link, see notes (edits) above.

Ah that?s a shame. Will the SLC slide start on the SS rails at all?


Sent from my iPhone using Tapatalk

It will start as the frame dimensions are the same...fit there is fine. See pic below side by side from the rear...it will make way more sense...

So if you took the sear cage out would it fit? Thx for the pics! More pls lol


Sent from my iPhone using Tapatalk

Ok this is all I can do tonight...lol

Slide cuts:

Frames:

Fits but won?t function:

Doesn?t fit, wouldn?t function as-is:

Thx! I think it?s just the FPB holding you up. We could have something here. Those guns are stunning bro just wanna say congrats on having both


Sent from my iPhone using Tapatalk

Many many thanks. We have some serious CZ lovers in these parts at a local shop...they aren?t even an official CZ retailer and get more great CZs than just about anywhere I have seen....and unfortunately for me they know who to call.

Right on. It looks like a swap of the sear cages and away you go with a two tone steel Shadow compact. You?d have to use a narrow hammer too, but it looks doable from the pics. I could be wrong


Sent from my iPhone using Tapatalk

[Sango]

Congratulations fellas!!! They are absolutely GORGEOUS. I may have to go get mine out now...

Love the new polished P01

[GBCZ]

I can't wait til my stainless P-01 comes in, never thought my polished 75B would have a similar relative in the safe..I sort of hope they do a polished stainless 97 now.. 

[Sango]

I can't wait til my stainless P-01 comes in, never thought my polished 75B would have a similar relative in the safe..I sort of hope they do a polished stainless 97 now.. 

Same here. Oh, I?d jump on one of those!  Love my 97.

[Chicago Dude]

Saturday 1:30 PM Central time.
I just got one from TechNet Armory. Jeff sold it to me for $ 850 shipped. He has one left.
I bought from him my Steel frame P-01(99041), and he said he has few of them as well (I don't know the price tag on them).
So - if any of you still wants one, call Jeff @ 414-962-7773

[huskerlrrp]

So it looks like these were initially going for around $725 and now they are around $825-875. Does that sound right? Any leads for a tightwad?

[Rmach]

So it looks like these were initially going for around $725 and now they are around $825-875. Does that sound right? Any leads for a tightwad?

Buds Guns just had them for $713 delivered last week, but they sold out fast. You just have to keep checking each day.