The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: phr1990 on September 29, 2019, 02:25:55 PM

Title: any aftermarket supressor height sights?
Post by: phr1990 on September 29, 2019, 02:25:55 PM
Looking for tall sights to an optics ready to cowitness with an acro. CZs website says they have some in development. The aftermarket beat them to the punch yet? i cant find anything.
Title: Re: any aftermarket supressor height sights?
Post by: .45 acp nut on October 03, 2019, 04:30:16 PM
I'd be Interested, too.
Title: Re: any aftermarket supressor height sights?
Post by: davekoch on October 04, 2019, 09:09:07 PM
Dawson Precision has sights of various heights for probably all the CZs.  I don't think they have a suppressor height set, but you can select custom heights with a front sight and rear sight purchased individually.

 They have a calculator on the site that helps you determine what you need.

https://dawsonprecision.com/sights/cz-sights/

 I have an OEM tritium CZ suppressor height set that I'm going to put up for sale in a few weeks. I just want to make sure my custom sight setup zeros properly first.

Let me know and I can take some measurements of the CZ sights if anyone needs it.
Title: Re: any aftermarket supressor height sights?
Post by: phr1990 on October 07, 2019, 02:07:26 PM
i called cz they said they are releasing sights as a combo with plates now nd will release separate sights on their own down the world. I think just rmr and deltapoint plates now,
Title: Re: any aftermarket supressor height sights?
Post by: 01svtL on October 10, 2019, 11:39:04 AM
Dawson Precision has sights of various heights for probably all the CZs.  I don't think they have a suppressor height set, but you can select custom heights with a front sight and rear sight purchased individually.

 They have a calculator on the site that helps you determine what you need.

https://dawsonprecision.com/sights/cz-sights/

 I have an OEM tritium CZ suppressor height set that I'm going to put up for sale in a few weeks. I just want to make sure my custom sight setup zeros properly first.

Let me know and I can take some measurements of the CZ sights if anyone needs it.

Please post the height on your OEM front suppressor sight when you can.  I have them on mine but don’t have a tool to measure accurately with.
Title: Re: any aftermarket supressor height sights?
Post by: davekoch on October 14, 2019, 08:00:29 AM
Here are the dimensions of the OEM H3 sights off my Suppressor Ready P10C:

Front:

Base to top of blade: 0.414"
Just the blade: 0.318
Blade Width: 0.126"

Rear:

Height (not including dovetail): 0.465"

(https://i.imgur.com/F2WlZr4.jpg)

(https://i.imgur.com/gSJ4mlB.jpg)

(https://i.imgur.com/McIDpMQ.jpg)

(https://i.imgur.com/GpqCN4j.jpg)
Title: Re: any aftermarket supressor height sights?
Post by: 01svtL on October 28, 2019, 10:30:51 AM
Thanks!
Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on October 28, 2019, 11:32:07 AM
Suppressor ready and optics ready rear sights are different.  The only source for tall sights that fit the Optic Ready are from CZ, and they're only available in kits with optic plates for now, if you can find them in-stock.  I blacked out the rear dots.  They're fine with RMR/Holosun 507, but just barely usable with an SRO.  Probably fine with every other RDS except the much taller DPP.

(https://1.bp.blogspot.com/-oTWEaEMM9aA/XbcJbH3nyaI/AAAAAAAADqA/48AWbLtRR4UZP7zyBeMR0er9FqIqrJycQCLcBGAsYHQ/s1600/72862500_2908955755799768_2893244378954858496_n.jpg)

(https://1.bp.blogspot.com/-3roKpFoXFUY/XbcJbGSL-aI/AAAAAAAADp8/3YnGXRPTGlQr66Zp2V7JpMb8vFih_D_JgCLcBGAsYHQ/s1600/72650432_2908955735799770_7066764362194616320_n.jpg)
Title: Re: any aftermarket supressor height sights?
Post by: Hox013 on October 29, 2019, 11:28:27 AM
Are those steel or aluminum?
Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on October 30, 2019, 12:40:22 AM
Are those steel or aluminum?

CZ-USA plates are steel.
Title: Re: any aftermarket supressor height sights?
Post by: davekoch on October 31, 2019, 03:06:04 PM
Suppressor ready and optics ready rear sights are different.
Different how?

Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on October 31, 2019, 03:23:49 PM
Suppressor ready and optics ready rear sights are different.
Different how?

The Optics Ready rear sight dovetail is cut further back than the standard/suppressor ready models. So regular P10/Shadow2 rear sights will overhang the slide on an OR.

(https://1.bp.blogspot.com/-el8BkCujOqA/Xbs0j8er3YI/AAAAAAAADqg/giZ_s2Isw8MriPNliKY-ouM8oU6Tkl-iACLcBGAsYHQ/s1600/p10%2Bor%2Bsights.png)
Title: Re: any aftermarket supressor height sights?
Post by: davekoch on October 31, 2019, 03:31:30 PM
That's interesting. I didn't notice that little detail. Thanks for the side by side.  It makes sense that they wanted to make more room for the optic plate.

 The dovetail itself is the same though?
Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on October 31, 2019, 03:52:50 PM
That's interesting. I didn't notice that little detail. Thanks for the side by side.  It makes sense that they wanted to make more room for the optic plate.

 The dovetail itself is the same though?

I think so, but I don't have a regular sight anymore to confirm.
Title: Re: any aftermarket supressor height sights?
Post by: phr1990 on October 31, 2019, 08:32:41 PM
i wouldnt mind a slight overhang as long as its solid. Hope cz ramps up their production.
Title: Re: any aftermarket supressor height sights?
Post by: theoldmusicman on November 01, 2019, 04:18:53 AM
Suppressor ready and optics ready rear sights are different.  The only source for tall sights that fit the Optic Ready are from CZ, and they're only available in kits with optic plates for now, if you can find them in-stock.  I blacked out the rear dots.  They're fine with RMR/Holosun 507, but just barely usable with an SRO.  Probably fine with every other RDS except the much taller DPP.

(https://1.bp.blogspot.com/-oTWEaEMM9aA/XbcJbH3nyaI/AAAAAAAADqA/48AWbLtRR4UZP7zyBeMR0er9FqIqrJycQCLcBGAsYHQ/s1600/72862500_2908955755799768_2893244378954858496_n.jpg)

(https://1.bp.blogspot.com/-3roKpFoXFUY/XbcJbGSL-aI/AAAAAAAADp8/3YnGXRPTGlQr66Zp2V7JpMb8vFih_D_JgCLcBGAsYHQ/s1600/72650432_2908955735799770_7066764362194616320_n.jpg)

The top picture is the 507?  1/3 co-witness?  I going to be getting a 10-c optic ready sometime this month and I already have a hs507c.  I can't find and listing on the CZ web site about mounting plates or sights so they must be out of stock.
Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on November 01, 2019, 10:13:55 AM
The top picture is the 507?  1/3 co-witness?  I going to be getting a 10-c optic ready sometime this month and I already have a hs507c.  I can't find and listing on the CZ web site about mounting plates or sights so they must be out of stock.

Not really what you'd call a 1/3 co-witness, more like lower 1/5.  The irons need to be zeroed independently from the dot.  Just "Lollipopping" the dot on top of the irons will give you a false zero.  While the irons sit very low, most of the front dot is visible and there's enough rear notch to use at speed with the Holosun. 
Title: Re: any aftermarket supressor height sights?
Post by: Hox013 on November 04, 2019, 03:29:02 PM
Are those steel or aluminum?

CZ-USA plates are steel.

I think he was asking about the sights themself. Many standard p10 sights were aluminum from the factory, and given the sights only add $20 value to the optic plate, I'm guessing they are aluminum. Which is why I'll probably run just the RMR until some steel sights are available.
Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on November 05, 2019, 05:06:12 PM
Are those steel or aluminum?

CZ-USA plates are steel.

I think he was asking about the sights themself. Many standard p10 sights were aluminum from the factory, and given the sights only add $20 value to the optic plate, I'm guessing they are aluminum. Which is why I'll probably run just the RMR until some steel sights are available.

The sights have always been steel.
Title: Re: any aftermarket supressor height sights?
Post by: mountaineering on November 11, 2019, 03:30:36 AM
earl,

can you post a pic of the side profile of the sights that are part of the oem optics plate package?

Are those steel or aluminum?

CZ-USA plates are steel.

I think he was asking about the sights themself. Many standard p10 sights were aluminum from the factory, and given the sights only add $20 value to the optic plate, I'm guessing they are aluminum. Which is why I'll probably run just the RMR until some steel sights are available.

The sights have always been steel.
Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on November 12, 2019, 08:41:42 AM
earl,

can you post a pic of the side profile of the sights that are part of the oem optics plate package?

Not the best pic, I'll replace it with one that's more squared up with the sight tonight.
(https://1.bp.blogspot.com/-3oBzn2xWZZg/Xcq2XvNMP9I/AAAAAAAADtU/PO25CPngw-ACH9qxfV3djT6_WtsgtkelACLcBGAsYHQ/s1600/IMG_3793.JPG)
Title: Re: any aftermarket supressor height sights?
Post by: mountaineering on November 12, 2019, 10:32:49 PM
Earl,

I'm curious in what the front sight's side profile looks like as well, thanks in advance.


Not the best pic, I'll replace it with one that's more squared up with the sight tonight.
(https://1.bp.blogspot.com/-3oBzn2xWZZg/Xcq2XvNMP9I/AAAAAAAADtU/PO25CPngw-ACH9qxfV3djT6_WtsgtkelACLcBGAsYHQ/s1600/IMG_3793.JPG)
Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on November 13, 2019, 07:17:29 PM
Earl,

I'm curious in what the front sight's side profile looks like as well, thanks in advance.


(https://1.bp.blogspot.com/-QhLwwnhZrmk/XcycU7hjLlI/AAAAAAAADtw/mNUBWL1FPcgnoSbB-iuJTaJgvjL9pHXiwCLcBGAsYHQ/s1600/3ADDA3E3-96CE-4BC6-947C-590500867B38.jpeg)
Title: Re: any aftermarket supressor height sights?
Post by: phr1990 on November 13, 2019, 09:07:16 PM
checked with cz and there still only doing plate/sight combos. Sigh. The acro is not one plate they have yet, even though aimpoint mkes a cz plate
Title: Re: any aftermarket supressor height sights?
Post by: earlan357 on November 14, 2019, 09:21:38 AM
checked with cz and there still only doing plate/sight combos. Sigh. The acro is not one plate they have yet, even though aimpoint mkes a cz plate

I just sent an email to Dawson Precision and CZC inquiring about OR rear sights.  Here's the response I got back from Dawson.  Looks like demand just isn't high enough yet.

Quote
Earl,

At this time we have no plans now. But it is a request Mr Dawson gets sometimes. If he gets more request he may take it under consideration to design something.

Sales Team
Dawson Precision
866-300-1911
Title: Re: any aftermarket supressor height sights?
Post by: mountaineering on November 14, 2019, 11:49:52 PM
Thanks Earl,

Looks like I'm ordering from the webstore @ CZ-USA

(https://1.bp.blogspot.com/-QhLwwnhZrmk/XcycU7hjLlI/AAAAAAAADtw/mNUBWL1FPcgnoSbB-iuJTaJgvjL9pHXiwCLcBGAsYHQ/s1600/3ADDA3E3-96CE-4BC6-947C-590500867B38.jpeg)