The Original CZ Forum

GENERAL => General Discussion => Topic started by: shootingisfun on January 13, 2020, 10:31:17 AM

Title: CZ Master gunsmith needed
Post by: shootingisfun on January 13, 2020, 10:31:17 AM

Have two pistols that need work, a pre B and a Sphinx AT2000   The pre-b, with the hammer down, if you pull it back, the safety will automatically set itself to safe.  To shoot the pistol you have to flick the safety off before every pull of the trigger.    The Sphinx, with the hammer back and the safety on, if you pull the trigger twice the safety will move to the off position on the second pull and fire.


Looking for a CZ 75 guru who would be able to solve these issues.  I have already checked around at the obvious places, no luck.


Thanks

Title: Re: CZ Master gunsmith needed
Post by: himurax13 on January 13, 2020, 10:57:21 AM

It sounds to me that the safeties were not fitted to either sear or vice versa.

A "master" gunsmith is not needed. Just someone who has done this before.

Sent from my SM-G970U using Tapatalk

Title: Re: CZ Master gunsmith needed
Post by: Grendel on January 13, 2020, 11:02:38 AM

Stuart at CZC, or David at CGW.

Title: Re: CZ Master gunsmith needed
Post by: Tanners Owner on January 13, 2020, 12:56:17 PM

Quote from: Grendel on January 13, 2020, 11:02:38 AM

Stuart at CZC, or David at CGW.

Grendel has it right. These two are the best. I’ve had great customer service and communication with the CGW team- give them a call and discribe the problem- might be able to solve it telephically

Title: Re: CZ Master gunsmith needed
Post by: painter on January 13, 2020, 03:05:03 PM

I'm pretty sure CGW stopped working on the Sphinx pistols.

You'd have to contact them to confirm.