Author Topic: CZ Master gunsmith needed  (Read 859 times)

0 Members and 1 Guest are viewing this topic.

Offline shootingisfun

  • Newbie
  • *
  • Posts: 20
CZ Master gunsmith needed
« on: January 13, 2020, 10:31:17 AM »
Have two pistols that need work, a pre B and a Sphinx AT2000   The pre-b, with the hammer down, if you pull it back, the safety will automatically set itself to safe.  To shoot the pistol you have to flick the safety off before every pull of the trigger.    The Sphinx, with the hammer back and the safety on, if you pull the trigger twice the safety will move to the off position on the second pull and fire.


Looking for a CZ 75 guru who would be able to solve these issues.  I have already checked around at the obvious places, no luck.


Thanks
CZ 75TS
P7m8

Offline himurax13

  • Sr. Member
  • ****
  • Posts: 615
Re: CZ Master gunsmith needed
« Reply #1 on: January 13, 2020, 10:57:21 AM »
It sounds to me that the safeties were not fitted to either sear or vice versa.

A "master" gunsmith is not needed. Just someone who has done this before.

Sent from my SM-G970U using Tapatalk
« Last Edit: January 13, 2020, 03:08:58 PM by himurax13 »

Offline Grendel

  • Administrator
  • Hero Member
  • *****
  • Posts: 8898
  • 'Live Long, and Prosper'
Re: CZ Master gunsmith needed
« Reply #2 on: January 13, 2020, 11:02:38 AM »
Stuart at CZC, or David at CGW.
Corruptissima re publica plurimae leges - Tacitus

Inter arma enim silent leges - Cicero

I wasn't born in America, but I got here as fast as I could.

Offline Tanners Owner

  • Hero Member
  • *****
  • Posts: 1536
Re: CZ Master gunsmith needed
« Reply #3 on: January 13, 2020, 12:56:17 PM »
Stuart at CZC, or David at CGW.

Grendel has it right. These two are the best. I’ve had great customer service and communication with the CGW team- give them a call and discribe the problem- might be able to solve it telephically
Like a midget at a urinal, I'll have to keep on my toes

Offline painter

  • Hero Member
  • *****
  • Posts: 6231
Re: CZ Master gunsmith needed
« Reply #4 on: January 13, 2020, 03:05:03 PM »
I'm pretty sure CGW stopped working on the Sphinx pistols.

You'd have to contact them to confirm.
I had the right to remain silent...

but not the ability.