The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: Earl Keese on March 17, 2021, 09:36:53 PM
-
I'd like to gather examples of as many different optic set ups as possible to include in the P10 tuning thread. Doesn't matter which size P10 you have. Post 'em if ya got'em. Please include a pic or two, optic model, back up sight brand and size, and the shop that did the work if it was milled.
-
P-10S OR
Vortex Venom 6 MOA
J-Point sights
(https://imagizer.imageshack.com/v2/1024x768q90/924/tJqjVy.jpg)
-
P-10S OR
Vortex Venom 6 MOA
J-Point sights
(https://imagizer.imageshack.com/v2/1024x768q90/924/tJqjVy.jpg)
Nice! Do you have heights or a p/n for the sights?
-
Nice! Do you have heights or a p/n for the sights?
Unfortunately I was not able to get the exact sight height measurements, but they came in this kit with the correct optic adapter plate:
https://www.midwayusa.com/product/102120373?pid=912362
-
P-10S OR
Vortex Venom 6 MOA
J-Point sights
(https://imagizer.imageshack.com/v2/1024x768q90/924/tJqjVy.jpg)
Nice! Do you have heights or a p/n for the sights?
Unfortunately I was not able to get the exact sight height measurements, but they came in this kit with the correct optic adapter plate:
https://www.midwayusa.com/product/102120373?pid=912362
That'll work! Thanks
-
Gentlemen, please post the requested details with your pics, this is to help others who are considering adding an optic and tend to post questions about sight heights etc. Btw, those are some nice looking P10's! Thanks for sharing.
-
P10C OR
- Holosun 507c X2
- CZ adaptor plate
- Night Fision Optic Ready sights (https://hbindustries.net/store/shop/cz-p10-optic-ready-tritium-sight-sets-by-night-fision/)
(https://a4.pbase.com/g12/07/240307/2/171491947.u6vdrivn.jpg)
(https://a4.pbase.com/g12/07/240307/2/171491949.79iR04o2.jpg)
-
P10 c custom, milled for a dpp but running a 407k. Work done by NC engravers. Cerakote by gulf coast customs (https://uploads.tapatalk-cdn.com/20210319/1afe4d6d8c2292d33ae687a89db9951e.jpg)
Sent from my HD1907 using Tapatalk
(https://uploads.tapatalk-cdn.com/20210319/485d0bca728747f5d4741df5b1b194b6.jpg)
-
I put some details in the red dot and optics forum, but here is the short version of the results, using factory P-10S OR slide and sights, with a CZCustom PT-9 plate and shortened sight screws that came with the Holosun sight. Good co-witness in my opinion, and the sight width is perfect for the narrow slide pistol.
(https://photos.smugmug.com/photos/i-vtDqTzr/0/65ddf498/M/i-vtDqTzr-M.jpg) (https://photos.smugmug.com/photos/i-sbKmJ4D/0/2b1823e4/M/i-sbKmJ4D-M.jpg)
You MUST shorten the M4 screws for the sight to plate by about 4 threads otherwise they will bottom out on the slide before the sight is tight.
Joe
-
(https://uploads.tapatalk-cdn.com/20210324/3894d567336f6e6c33bbdad9a17a2231.jpg)
Currently.... some to be a C upper with an SRO optic
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210324/3894d567336f6e6c33bbdad9a17a2231.jpg)
Currently.... some to be a C upper with an SRO optic
Sent from my iPhone using Tapatalk
ATEI slide mill
RMR 06 type 2
Dawson P09 #019-512 .280 tall front sight
Ameriglo GLT 507 rear
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20210407/2a14577e7cdd56851326cc53db528a27.jpg)
Southwest Precision slide mill
RMR 06
Dawson 019-474 CZ front .265 tall.
Dawson 018-702 Glock rear .375 tall
Sent from my iPhone using Tapatalk
-
I'd like to gather examples of as many different optic set ups as possible to include in the P10 tuning thread. Doesn't matter which size P10 you have. Post 'em if ya got'em. Please include a pic or two, optic model, back up sight brand and size, and the shop that did the work if it was milled.
P10C - Czech made
Holosun 507c
Glock sights
Killer Innovation threaded barrel
HB Industries Theta trigger
OLight PL Pro Valkyre
Milling and camo cerakote by Primary Machine
(https://live.staticflickr.com/65535/51102240790_6e7dce6bae_c.jpg) (https://flic.kr/p/2kRJkP5)p10c (https://flic.kr/p/2kRJkP5) by Joe (https://www.flickr.com/photos/jmmphotography/), on Flickr
-
I'd like to gather examples of as many different optic set ups as possible to include in the P10 tuning thread. Doesn't matter which size P10 you have. Post 'em if ya got'em. Please include a pic or two, optic model, back up sight brand and size, and the shop that did the work if it was milled.
P10C - Czech made
Holosun 507c
Glock sights
Killer Innovation threaded barrel
HB Industries Theta trigger
OLight PL Pro Valkyre
Milling and camo cerakote by Primary Machine
(https://live.staticflickr.com/65535/51102240790_6e7dce6bae_c.jpg) (https://flic.kr/p/2kRJkP5)p10c (https://flic.kr/p/2kRJkP5) by Joe (https://www.flickr.com/photos/jmmphotography/), on Flickr
Nice looking P10. Do you have specs for the back up sights?
-
Hammertime, I have the exact same set up except I have yet to replace the rear sight. can you post a pic of the sight picture? also, how easy is the removal and replacement of the rear sight with the J point sights? I do not have a sight pusher. thanks.
-
Hammertime, I have the exact same set up except I have yet to replace the rear sight. can you post a pic of the sight picture? also, how easy is the removal and replacement of the rear sight with the J point sights? I do not have a sight pusher. thanks.
My rear sight was jammed in there pretty good. Since the only sight pusher I own at the moment is pretty lame, I ended up taking it to my gunsmith and having him push the rear sight out and mount the new one.
I'll grab a pic of the sight picture when I get a chance...
-
Nice looking P10. Do you have specs for the back up sights?
Don't know. I'll check.
-
I'd like to gather examples of as many different optic set ups as possible to include in the P10 tuning thread. Doesn't matter which size P10 you have. Post 'em if ya got'em. Please include a pic or two, optic model, back up sight brand and size, and the shop that did the work if it was milled.
P10C - Czech made
Holosun 507c
Glock sights
Killer Innovation threaded barrel
HB Industries Theta trigger
OLight PL Pro Valkyre
Milling and camo cerakote by Primary Machine
(https://live.staticflickr.com/65535/51102240790_6e7dce6bae_c.jpg) (https://flic.kr/p/2kRJkP5)p10c (https://flic.kr/p/2kRJkP5) by Joe (https://www.flickr.com/photos/jmmphotography/), on Flickr
Nice looking P10. Do you have specs for the back up sights?
Front post: Dawson precision .280in
Rear: Ameriglo GL404 .394in
-
Shroud thickness... the reason I prefer Vortex to Holosun
(https://i.imgur.com/8TZoikq.jpg)
-
Hammertime, I have the exact same set up except I have yet to replace the rear sight. can you post a pic of the sight picture? also, how easy is the removal and replacement of the rear sight with the J point sights? I do not have a sight pusher. thanks.
Hey - apologies for not getting around to getting a good photo of the sight picture yet. What I can tell you is that I had to have my gunsmith use a sight pusher to get the OEM rear sight out and mount the OR rear sight. In general, these sights are a little taller than I would prefer, but I blacked them out which has helped with the sight picture being less 'busy.'
I may experiment with a different set of OR sights at some point, but experimenting gets costly, so I'd like to get some solid info first on another option that isn't quite as tall as these, but will still function as BUIS with the Venom (I don't co-witness my pistol optics).
-
Update - as mentioned above, the sights I was running before were higher than I really wanted and made the sight picture a little too busy. After checking out the height measurements for the Night Fision OR sights, I decided to try them out. Easy to mount and I really like that both the front and rear sights have set screws. I went with the "yellow" (which really seems more like neon green to me) front sight, blacked out rear. They work perfectly with the Venom, being at the very bottom of the optic window but still fully visible if I need them - exactly what I want in a BUIS that isn't co-witnessed.
(https://imagizer.imageshack.com/v2/1024x768q90/924/zOAs9i.jpg)
-
Thanks for the update.
-
I have been trying to find a P10 C Optics Ready but no luck so far. A lot of good setups in here.
-
P-10F Trijicon SRO, factory suppressor sights, local toolmaker milled the slide
P-10C Trijicon SRO, factory suppressor sights, local toolmaker milled the slide
(https://imagizer.imageshack.com/v2/800x600q90/922/m5QfRi.jpg) (https://imageshack.com/i/pmm5QfRij)
-
What’s the co/witness area with the SRO + factory suppressor sights?
I almost purchased a P10F suppressor ready today with the though I’d just having the slide milled.
My preference is lower 1/3rd of the glass area or below.
-
What’s the co/witness area with the SRO + factory suppressor sights?
I almost purchased a P10F suppressor ready today with the though I’d just having the slide milled.
My preference is lower 1/3rd of the glass area or below.
It's very low in the FOV, definitely 1/3 or below.
(https://imagizer.imageshack.com/v2/800x600q90/924/cYZWbo.jpg) (https://imageshack.com/i/pocYZWboj)
-
Thank you for posting the picture,
I have a P-09 SR coming instead....
I may just have to send it off to be milled but I wanna shoot it first and see what it's like.
-
Posted
This pistol before with an RMR... just upgraded to the SRO for competitions
(https://uploads.tapatalk-cdn.com/20210609/e0ae60af8600d4435c4f796a915f051c.jpg)
Sent from my iPhone using Tapatalk
-
That’s trick man!
Full size body and comp added to a P-10C
Well played Sir! Well played INDEED!