The Original CZ Forum

CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: armoredman on September 25, 2010, 10:08:09 AM

Title: What holsters fit the P-07?
Post by: armoredman on September 25, 2010, 10:08:09 AM: High Noon has a lot of rigs up for CZs, but for the P-07 I have personal experiance with two, the Skin Guard and the Slide Guard. http://highnoonholsters.com/ (http://highnoonholsters.com/) Good stuff, especially the slide guard, nice rig!

[Mods Added: if it's good enough to suggest, then it's good enough to leave a Link.

Suggestions without a link may be deleted.]
Title: Re: What holsters fit the P-07?
Post by: yogev on September 25, 2010, 12:15:23 PM: all the holster from front-line catalog can be orderd for the p07
http://www.front-line.co.il/ (http://www.front-line.co.il/)
Title: Re: What holsters fit the P-07?
Post by: uio909 on September 28, 2010, 10:14:45 PM: Alabama holsters make holsters for the P07, almost every model they have I think.....I have an IWB holster and a pocket magazine holster and it's great.... http://alabamaholster.com/ (http://alabamaholster.com/)

Also I've heard you can ask atomic dog holsters and center of mass....
Title: Re: What holsters fit the P-07?
Post by: Falcn on October 01, 2010, 10:59:06 AM: Got a custom Atomic Dog Holster made for my P-07.

http://www.czforumsite.info/index.php?topic=32661.0 (http://www.czforumsite.info/index.php?topic=32661.0)
Title: Re: What holsters fit the P-07?
Post by: mikey on October 21, 2010, 03:22:30 PM: I have a Master's Leather open-top pancake holster designed for an XD 9,40,45 with 4" barrel.
http://www.jbpholsters.com/servlet/the-72/LEATHER-PANCAKE-GUN-HOLSTER/Detail (http://www.jbpholsters.com/servlet/the-72/LEATHER-PANCAKE-GUN-HOLSTER/Detail)
The P-07 fits inside it very well. It is quite snug and feels secure for an open-top holster with no active retention mechanism. The PCR also fits nicely, though not quite a snugly. The holster seems to be fairly well constructed, though the leather isn't as thick/stiff as that used for some other holsters that I have seen. So far I have no complaints.

They also make a 3-slot model with a retention strap, but I have no experience using it with the P-07.
http://www.jbpholsters.com/servlet/the-33/LEATHER-GUN-HOLSTER-PANCAKE/Detail (http://www.jbpholsters.com/servlet/the-33/LEATHER-GUN-HOLSTER-PANCAKE/Detail)
Title: Re: What holsters fit the P-07?
Post by: azjay on October 22, 2010, 06:00:37 PM: ive got a galco "Concealable Belt Holster" for the springfield xd 4" model. its the pancake open top style leather holster.

http://www.usgalco.com/HolsterPG3.asp?ProductID=2736&GunID=223 (http://www.usgalco.com/HolsterPG3.asp?ProductID=2736&GunID=223)

fits great. to break it in, i wrapped my p07 in a couple of plastic grocery bags, then kept it like that, in the holster for 24 hours. perfect! (the plastic bags help to stretch the leather just a bit more, its personal preference. i wanted just a little less retention, not much, so i used 2 plastic bags. you can use 1, or 2 or 3 bags depending on how much retention you want to give up)
Title: Cheap Holster
Post by: danphil2001 on December 20, 2010, 10:08:04 AM: I found a GREAT holster: (LPS-PVC-H1708)
https://www.outdoorbunker.com (https://www.outdoorbunker.com)
UTG Deluxe Universal Horizontal Shoulder Holster-Black it came out $18.04. Everything about this holster was adjustable. I wore it all day with no complaints. The gun fits good and the two mag pouchs were nice to have. I'll send pix soon. The price was well worth it........
Title: Re: What holsters fit the P-07?
Post by: czprime on February 27, 2011, 05:18:49 PM: I found a Blackhawk Askins for the SIG P226 works well with mine. Cabelas has them for $55. Very comfortable. My problem is finding a nice piece of leather to carry mags in. Right now my mag carrier is from BladeTech.
Title: Re: What holsters fit the P-07?
Post by: Nubes on March 01, 2011, 12:13:42 AM: I came across this guy at at local gun show and then looked him up online. I know his site looks a little hokey but for around 30 bucks it'll do for a cheap holster. I don't have one for my P07 but I bought one for my Keltec PF9 and I like it(the holster anyway, the gun not so much lol :-\). Next time I see him at a gun show I'll be sure to find out which size is best for the P07 and purchase it.

Edit: My bad forgot to give a link. http://www.wrbss.com/holsters.html (http://www.wrbss.com/holsters.html)
Title: Re: What holsters fit the P-07?
Post by: codisimo on March 01, 2011, 12:20:31 AM: Wanna post anything about the guy or just tell a bunch of people on a CZ related forum that you have a Holster for your Kel-Tec? Just kidding, but really any info on a decent holster maker who could make a good holster for the P-07 or any other CZ is helpful to us all.
Title: Re: What holsters fit the P-07?
Post by: turbodieseli4i6 on March 03, 2011, 09:45:09 PM: I found this company from CZ forums, http://www.concealedtechnology.com/en/content/comfort-carry-bodyguard-tuckable-holster (http://www.concealedtechnology.com/en/content/comfort-carry-bodyguard-tuckable-holster)
I called Rob up and told him I had a P 07 Duty and he said no problem.

When I found out his business was is Springfield, I went to his shop and he made one for my P07 on the spot!
This holster feels and fits great! I think my P3AT will take a back seat to my Duty now.
This is a great holster at a great price imho.

Rob also said when I find a light laser combo that I liked, let him know what brand and he would make one for that also.
I give this guy a big thumbs up!
Title: Re: What holsters fit the P-07?
Post by: shootitup on April 17, 2011, 08:17:31 PM: This is a great site, bought P-07 Duty in a 40 s&w about a month ago even after reading about all the diffrent problems. Anyway I found a holster to fit me. Tagua gunleather BH3-680 for a Springfield XDM 3.8" fit perfect only thing I had to do was make sure the decocker levers went inside, left the gun in it overnight to stretch decocker slides right in, also it was a good price for all leather holster.
Title: Re: What holsters fit the P-07?
Post by: rugger02 on April 23, 2011, 11:25:04 PM: I picked up a paddle holster from frontline, cz custom as well as high noon also have holsters for the P-07.
http://www.highnoonholsters.com/ (http://www.highnoonholsters.com/)
http://czcustom.com/BladeTechBeltHolster.aspx (http://czcustom.com/BladeTechBeltHolster.aspx)
http://www.highreadytactical.com/catalog/product.asp?ret_id=943830&pid=1030163 (http://www.highreadytactical.com/catalog/product.asp?ret_id=943830&pid=1030163)
Title: Re: What holsters fit the P-07?
Post by: mschminke on May 13, 2011, 01:34:05 PM: Been looking for a decent leather belt holster for my new P07, finally found a site that had them. They said they just added the P07 and the look good. Falco Gun Holsters......http://www.falcoholsters.com/eshop/leather-holsters/belt-holsters/237-side-snap-belt-holster-it-140.html (http://www.falcoholsters.com/eshop/leather-holsters/belt-holsters/237-side-snap-belt-holster-it-140.html) .

Just ordered one but havent received it yet. "still looking for night sights by the way"
Title: Re: What holsters fit the P-07?
Post by: begleysm on May 17, 2011, 09:58:52 AM: Just noticed that the Crossbreed SuperTuck now has the P07 listed as an officially supported firearm.

http://crossbreedholsters.com/IWB/tabid/56/CategoryID/1/List/0/Level/1/ProductID/1/Default.aspx?SortField=ProductName,ProductName (http://crossbreedholsters.com/IWB/tabid/56/CategoryID/1/List/0/Level/1/ProductID/1/Default.aspx?SortField=ProductName,ProductName)

Sean
Title: Re: What holsters fit the P-07?
Post by: begleysm on May 17, 2011, 07:41:27 PM: I tried out the Blackhawk Serpa Level 2 for the USP compact... Didn't work at all.

Sean
Title: Re: What holsters fit the P-07?
Post by: rstp72 on June 04, 2011, 03:57:14 PM: :)got a great leather holster it's a blackhawk for Springfield XD size 15 the Duty fits perfectly and it's very comfy for everyday carry
but I can't figure out how to post photos ???
Title: Re: What holsters fit the P-07?
Post by: rstp72 on June 04, 2011, 04:08:56 PM: http://www.flickr.com/photos/59960012@N04/5475629072/in/photostream/ (http://www.flickr.com/photos/59960012@N04/5475629072/in/photostream/)
Title: Re: What holsters fit the P-07?
Post by: Polycoat on June 09, 2011, 11:42:13 AM: If you are up for a high quality molded holster, try Rocky River Leather. See:
http://rockyriverleather.com/content/index.php (http://rockyriverleather.com/content/index.php)

Full disclosure: I don't work for them. They did a custom modification on a holster I already had. They were very helpful and accommodating. In walking around their shop, I got to look and touch some of their holsters. They were very nicely crafted with good materials. I noticed on their website that they sell holsters for a CZ P07.
Title: Re: What holsters fit the P-07?
Post by: CB36457 on June 15, 2011, 05:13:34 PM: Just ordered an SOB holster for the P-07 from Kirkpatrick Leather Company in Laredo. It was 72.00 + 10.00 s&h. Turnaround time for items not in stock is 4-6 weeks. I will update this thread when I receive it..... I hope it is what I'm looking for.... :-\
Title: Re: What holsters fit the P-07?
Post by: MikeNice on June 28, 2011, 01:32:01 AM: Excuse me if I missed this elsewhere. Does anybody know if there is an alternate "fit" of the Black Hawk Tuckable IWB holster that will work with the P-07? I'm also interested in their nylon ambidextrous holster with mag pouch. Any idea what size would work?
Title: Re: What holsters fit the P-07?
Post by: couchcommando on June 29, 2011, 06:16:03 AM: While rummaging around the internet I found this website. http://www.bernieholster.com/ (http://www.bernieholster.com/) I don't have any experience with this company as I already have a Highnoon for my 07, but these look pretty good. They list the 07 and 2 other CZ models as pistols they make holsters for. Their stated turn around time is definatly fast.
If anyone decides to get one give us a report on how it works out.
Title: Re: What holsters fit the P-07?
Post by: zanard on July 19, 2011, 01:07:09 PM: cheapest holsters i found from http://www.highnoonholsters.com (http://www.highnoonholsters.com) , got owb and iwb holsters for cheap, and they seem to ship worldwide.
Title: Re: What holsters fit the P-07?
Post by: begleysm on July 21, 2011, 10:22:18 PM: I ordered a Kydex Level 2 Holster from Blade Tech.

Pros: Gun fits very well, holster is very nice.

Cons: For some reason, Blade Tech says they cannot make a WRS (their spring loaded thumb break) for the P-07. So, if you want a Level 2, you are stuck with a normal button snap thumb break.

Sean
Title: Re: What holsters fit the P-07?
Post by: Carbon Fiber Man on September 12, 2011, 04:33:32 PM: Quote from: turbodieseli4i6 on March 03, 2011, 09:45:09 PM
I found this company from CZ forums, http://www.concealedtechnology.com/en/content/comfort-carry-bodyguard-tuckable-holster (http://www.concealedtechnology.com/en/content/comfort-carry-bodyguard-tuckable-holster)
I called Rob up and told him I had a P 07 Duty and he said no problem.

When I found out his business was is Springfield, I went to his shop and he made one for my P07 on the spot!
This holster feels and fits great! I think my P3AT will take a back seat to my Duty now.
This is a great holster at a great price imho.

Rob also said when I find a light laser combo that I liked, let him know what brand and he would make one for that also.
I give this guy a big thumbs up!

That looks awesome! Where do you tuck it in? On your backside, front or on the side?
Title: Re: What holsters fit the P-07?
Post by: turbodieseli4i6 on September 12, 2011, 08:12:08 PM: On my right side, If I had do over I would get a left handed version and carry it at the small of my back.
If I have to tuck in my shirt, I carry my P3AT with a clip.
Title: Re: What holsters fit the P-07?
Post by: Sancho on September 24, 2011, 08:50:55 PM: The Galco Paddle Lite fits very well too.
http://www.usgalco.com/HolsterPG3.asp?ProductID=3632&GunID=223

The model for the 4 inch Springfield XD fits like it was made for the P-07.
It seems a bit too bulky for concealed carry with the paddle.

Galco has a similar model without the paddle.
http://www.usgalco.com/HolsterPG3.asp?ProductID=3938&GunID=223

Does anyone have experience with either holster?

Sancho
Title: Re: What holsters fit the P-07?
Post by: CZJAX on October 02, 2011, 11:36:39 PM: If you want an OWB leather holster, the Don Hume H721 OT for a XD 9/40 4 inch fits the gun perfect and the price for this holster cant be beat and I absolutely love the slide guard.The holster does extend a little past the muzzle but i think it helps stabilize the gun on your hip well. I bought mine here...http://www.topgunsupply.com/don-hume-h721ot-black-right-hand-xd-40-xd-9-4-inch.html

No, i dont work for top gun...
Title: Re: What holsters fit the P-07?
Post by: ukwildcats on February 16, 2012, 11:00:24 AM: Purchased the following:

Blackhawk Springfield XD Kydex Holster without Serpa -- http://www.opticsplanet.net/carbon-fiber-holster-pebble-finish-glock-17-22-31.html (http://www.opticsplanet.net/carbon-fiber-holster-pebble-finish-glock-17-22-31.html) -- fit was pretty good, applied a little heat to get a better fit. Definitely the way to go on the cheaper side for a holster -- will try out at the range to determine retention but right now the pistol does not come out with the holster held upside done yet draws are smooth.

Galco Wraith Belt Holster for Springfield XD -- http://www.opticsplanet.net/galco-wraith-belt-holster.html (http://www.opticsplanet.net/galco-wraith-belt-holster.html) -- fit was tight but followed directions of installing pistol in plastic bag to break it in -- Fits great now, definitely consider -- will also take to range to do further checks/test.

UK
Title: Re: What holsters fit the P-07?
Post by: Twmaster on March 13, 2012, 09:46:16 PM: Quote from: armoredman on September 25, 2010, 10:08:09 AM
High Noon has a lot of rigs up for CZs, but for the P-07 I have personal experiance with two, the Skin Guard and the Slide Guard. http://highnoonholsters.com/ (http://highnoonholsters.com/) Good stuff, especially the slide guard, nice rig!

AM, Of these two choices which do you prefer and why?

I'm getting my TX CHL this spring and I want to carry the 'Duty'.

I saw a photo you posted on THR of your Phantom in a concealed holster (I think it was the Phantom)
Title: What holsters fit the P-07?
Post by: RenegadeMan on March 14, 2012, 09:55:54 AM: I know I'm a cheapskate. Always have been. But I kept looking at the Slide Guard online and almost decided to get one. Then I looked at the price. About a hundred bucks for the unlined cowhide? Ouch... Seems kinda steep.

There are several other holsters I've seen online for around 50 bucks that look almost identical. What makes that Slide Guard so much better? Is it just thicker leather?
Title: Homemade Holsters for P-07
Post by: muffintheman on April 05, 2012, 01:28:36 AM: Since there weren't many holster options for this model, I decided to make myself a couple of holsters out of Kydex. I think they're pretty good for my first ones, and I'm planning on making more and improving the design further.

CCW IWB or OWB holster (adjustable tension on trigger guard...planning on improving the belt clip for enhanced stability):
(http://neopencarry.org/media/ccw2.jpeg)
(http://neopencarry.org/media/ccw4.jpeg)
(http://neopencarry.org/media/ccw5.jpeg)
(http://neopencarry.org/media/ccw9.jpeg)

OC holster with Tek Lok (adjustable tension on trigger guard...planning on adding a locking mechanism on top as well for added retention):
(http://neopencarry.org/media/oc4.jpeg)
(http://neopencarry.org/media/oc3.jpeg)
(http://neopencarry.org/media/oc7.jpeg)

Let me know what you guys think...more pics --> http://www.neopencarry.org/blog.php (http://www.neopencarry.org/blog.php)!

MtM
Title: Re: What holsters fit the P-07?
Post by: OSRc on May 04, 2012, 10:12:11 AM: I've been playing with the USP-C Serpa that was recommended previously....love it! Fits perfect with nice smooth draw upon disengaging the lock. I'll come back with more info after my IDPA shoot tonight, but for $33 its a steal!
Title: Re: What holsters fit the P-07?
Post by: Sampson on May 07, 2012, 01:58:00 PM: Just received my new holster from Rocky River Leather today. It is the SK13 Bikini model. I'm very impressed with it!! It is very well made and fits my P-07 like a glove. I can tell already it'll be my favorite holster!

www.rockyriverleather.com
Title: Re: What holsters fit the P-07?
Post by: ppd1107 on May 09, 2012, 12:47:34 PM: I noticed that Safariland has a duty holster that will fit a p01. Does anyone know if that is a similar size to a p07? Perhaps it is close enough to fit.
Title: Re: What holsters fit the P-07?
Post by: canoeist on May 13, 2012, 02:00:50 PM: I ordered an IWB holster for a CZ P-01 from the holster store. The P-07 fits in it pretty well, I am stretching it out a little with something wrapped around the P07 now. They are very reasonable, I did pay extra for forward cant. The natural ones seem to be a little thicker than the black ones.
Title: Re: What holsters fit the P-07?
Post by: Irishelcid on May 24, 2012, 12:41:39 AM: Blackhawk's Check Six holster made for a G19 tfits my P07 beautifully.
Title: Re: What holsters fit the P-07?
Post by: Rockyriverleather on May 26, 2012, 11:36:01 AM: I noticed a few mentions of my work on this board, so I signed on today. Thank You, to those that did that!
This is one I finished this morning, and mailed out. It's for the P-07 in horsehide, and modified throat. Hope you like it, and if there's any way I can help anyone, let me know by email or message.
(http://i.imgur.com/Uu8y9l.jpg)
Title: Re: What holsters fit the P-07?
Post by: Genin on May 27, 2012, 08:39:40 PM: www.shieldedholsters.com (http://www.shieldedholsters.com)

I have been using a SH holster for a year and half for my EDC (Glock 19). It is fantastic and the quality is unmatched for the price. All of the holsters there are available for the P-07 Duty.
Title: Re: What holsters fit the P-07?
Post by: gunfrog on July 03, 2012, 12:19:19 AM: Just picked up a PO 7 today. Wading through my box of holsters I have the following results: As mentioned the leather XD holsters will work, the thumb strap is a bit of a stretch over the PO-7 hammer at half cock, SIG 220 belt scabbard with thumb snap by Aker is a great fit and most of the leather (Desantis) and Safriland laminate sytnthetic holsters for the Glock 30/29 are ok to good fits.

All above cover the trigger guard and would retain the gun during a vigorous struggle.
Title: Re: What holsters fit the P-07?
Post by: dukecola on July 24, 2012, 08:52:48 PM: I just ordered a Crossbreed Supertuck. The reviews were good and they just added the P07 to their options. I especially liked the youtube video of the girl in the tight jeans showing us just how well the holster fit and worked. That was very helpful in my decision.
Title: Re: What holsters fit the P-07?
Post by: nickstone on August 09, 2012, 11:33:16 AM: Just found all the holster makers below list the P-07 Duty as an option. I don't have experience with any of them yet.

http://www.kramerleather.com/home.cfm (http://www.kramerleather.com/home.cfm)
http://rgrizzleleather.com/index.html (http://rgrizzleleather.com/index.html)
http://haugenhandgunleather.com/holsters/pc/home.asp (http://haugenhandgunleather.com/holsters/pc/home.asp)
http://bellcharteroakholsters.com/ (http://bellcharteroakholsters.com/)

http://www.wildbillsconcealment.com/wildbill/shop/ (http://www.wildbillsconcealment.com/wildbill/shop/)

Wild bill has some negative reviews on some other boards about shipping times, but YMMV.
Title: Re: What holsters fit the P-07?
Post by: dukecola on August 09, 2012, 08:37:58 PM: Well, got the Crossbreed today, so far two thumbs up! I wore it all day at work with no gun. Surprisingly it was very comfortable even though it wasn't broken in yet. I don't think I'll have any problems wearing this, even sitting down it was OK. Will wear it tomorrow with the gun.

BTW, got my Crossbreed in less than 2 weeks, even though they said 5-6 weeks. Nice!
Title: Re: What holsters fit the P-07?
Post by: gunfrog on August 11, 2012, 12:07:15 PM: I took a Milt Sparks Summer special (great IWB holster, available from Brownells) for a Glock 19, and sprayed some rubbing alchol on the trigger gaurd area, and put my PO 7 in. The alcholol softens the leather in the area applied, and after working it in and out a bit let it sit till dry for a near custom fit.
Title: Re: What holsters fit the P-07?
Post by: ronnieB on August 19, 2012, 02:42:40 PM: Yay first post after lurking for better than a year!

I got one from White Hat Holsters and can't say enough good things about them. It's a crossbreed clone but they have some extra perks. First they use screws instead of rivets so if you want to switch out guns you can keep the leather and only order a new kydex. I just got a viridian laser and didn't plan on keeping it on away from practice but I like it so I ordered the new kydex to fit it for only 30 bucks.

http://www.whitehatholsters.com/Default.asp (http://www.whitehatholsters.com/Default.asp)
The site has pics of their work, and so does their facebook.

The second perk is that they will put literally any graphic on it you want. They have some preset ones but all you have to do is send them a jpg and they will get a mockup back to you for approval before going to work on it. All that took a couple of hours with Tony via email. They will also do some custom work on the leather if you wish but I didn't do that.

Here's the one I currently have
(http://img.photobucket.com/albums/v87/crescentwrench/photo14.jpg)

Here's the proof model of the new kydex I have coming to me.
(http://img.photobucket.com/albums/v87/crescentwrench/deadholster.jpg)

Like I said, they'll put anything on there ;D
Title: Re: What holsters fit the P-07?
Post by: Wheelhouse on August 20, 2012, 07:50:20 PM: I have an OWB custom kydex holster on order as well as attachment towers and belt loops for IWB conversion from Personal Security Systems. Psholsters.com (http://Psholsters.com)Money back guarantee and much less wait time than others like RCS. Very anxious to get it and try it out.
Title: Re: What holsters fit the P-07?
Post by: Curmudgeonman on August 25, 2012, 12:57:32 AM: I put a Streamlight TLR-2 on my new P-07 Duty. Any holsters available that will fit with the TLR-2 on it?
Thanks...
Title: Re: What holsters fit the P-07?
Post by: dukecola on August 25, 2012, 08:22:06 PM: Sad news, founder of Crossbreed holsters unexpectedly died of a heart attack today. He will be sadly missed. Just got my first Crossbreed last week.
(http://i221.photobucket.com/albums/dd128/dukecola/photo-1.jpg)
Title: Re: What holsters fit the P-07?
Post by: czbo on September 24, 2012, 05:10:10 PM: I might be a little late to the discussion but Winthrop Holsters in Lakewood Ohio make top quality holsters at a much more reasonable price than some of the others. www.winthropholsters.com.
Title: Re: What holsters fit the P-07?
Post by: MartialGunner91 on October 08, 2012, 09:57:02 AM: Quote from: Curmudgeonman on August 25, 2012, 12:57:32 AM
I put a Streamlight TLR-2 on my new P-07 Duty. Any holsters available that will fit with the TLR-2 on it?
Thanks...

I know I'm super late to this discussion, but Raven Concealment Systems does make P-07 kydex holsters that will fit light attachments. It's actually what I plan on getting once I get my own P-07. It's the same holster used by Chris Costa and Travis Haley on the Dynamic Pistol videos. I like that it can be worn either IWB or OWB.

http://www.ravenconcealment.com/holsters/phantom-modular-holsters/phantom-light-compatible-holster?product_id=148
Title: Re: What holsters fit the P-07?
Post by: Twmaster on October 19, 2012, 04:23:10 AM: Just ordered a High Noon Skin Guard for my P-07. We'll see how we like it.
Title: Re: What holsters fit the P-07?
Post by: Twmaster on October 25, 2012, 02:57:10 PM: Got the High Noon Holster today. I like it. It's a bit tight but should break in soon enough. I've been wearing it around the house to test fit and I am pleased. Good feel, not too heavy etc.

(http://www.twmaster.com/stuff/shoot/cz/czholster.jpg)
Title: Re: What holsters fit the P-07?
Post by: livefreeordie1973 on November 10, 2012, 08:12:03 PM: The Tagua Gunleather (OPH)OPEN TOP INSIDE THE PANTS HOLSTER for the Taurus Compact PT92, PT99, PT100, PT101 fits with my CZ 75 P-01 Duty as an inside the waistband holster: http://www.taguagunleather.com/new/oph-open-top-inside-the-pants-holster-p36. The manufacturer part number is: IPH-122. It is an inexpensive option that is costed me $25. The holster fits best after soaking it in water and then putting the gun into the wet holster and let the holster dry. Make sure that you coat your gun with Remington Rem-Oil with the moisture resistant formula. I was given this advice by several people at the store that I bought my CZ at and acted on their advice. I conceal carry my P-07 using this holster every day and it is a good inexpensive option but not the best. So far, it has worked with me without complaints. Ideally, I would like to use a Blade-Tech IWB CCW carry holster that is molded to the form factor of the CZ 75 P-01 Duty, which is around $75 or so.
Title: Re: What holsters fit the P-07?
Post by: Belizejet on November 18, 2012, 08:07:45 PM: Blackhawk HK USP-C fits the PO-7 just fine. I use it for IDPA stuff.
Title: Re: What holsters fit the P-07?
Post by: t0mmy0175 on December 18, 2012, 12:34:29 PM: I have a Crimson Trace CMR-203 green laser on mine, what holster would work with this setup?
Title: Re: What holsters fit the P-07?
Post by: nickstone on December 18, 2012, 03:15:44 PM: Quote from: t0mmy0175 on December 18, 2012, 12:34:29 PM
I have a Crimson Trace CMR-203 green laser on mine, what holster would work with this setup?

You will probably have to get one special ordered. I was looking for an IWB with a Viridian C5L awhile back and not too many mfg had one for the P07 and a laser/light.

A quick check of some of the places I looked at showed the white hat holsters can make one for the P07 with a CT CMR-201.

http://www.whitehatholsters.com/MaxTuck-IWB-Hybrid-Holster-Jet-Black-Horsehide-p/black%20horsehide.htm (http://www.whitehatholsters.com/MaxTuck-IWB-Hybrid-Holster-Jet-Black-Horsehide-p/black%20horsehide.htm)

Some of the Custom Kydex makers could probably do one, but you would need to check with them.
Title: Re: What holsters fit the P-07?
Post by: jlselle on January 05, 2013, 10:04:47 PM: Center of Mass IWB tuckable holster for a CZ P07 Duty pistol. Must purchase with IWB tuckable extra magazine holster. New condition. Traded pistol, so no need to keep as does not fit new pistol. Total new for both $85 from C.O.M. Will sell both for $60 plus shipping. Email for any further info or photos.
Title: Re: What holsters fit the P-07?
Post by: atmd on January 07, 2013, 04:58:47 PM: Just ordered Pancake - Horsehide holster from The Rocky River Leather Co. Will post picture and short review when receive.
Title: Re: What holsters fit the P-07?
Post by: CombatSoldier00 on January 07, 2013, 05:37:17 PM: Blackhawk serpa XD 4", and a regular nylon holster size 17

(http://i1304.photobucket.com/albums/s521/Ben_soldier/IMG_20130107_171132-2_zps196a6ec1.jpg)

(http://i1304.photobucket.com/albums/s521/Ben_soldier/IMG_20130107_171104-1_zpsac3b0d49.jpg)
Title: Re: What holsters fit the P-07?
Post by: jettaboy40 on January 10, 2013, 07:31:52 AM: I recently bought a P-07 duty and am looking for a holster.I like the Rocky leathers. Any recommendations and also am interested in the Blackhawk serpa style as well.Any help to this rookie will be great
Title: Re: What holsters fit the P-07?
Post by: BGlas on January 10, 2013, 08:54:54 AM: What kind of holster are you looking for?
I have a Crossbreed SuperTuck IWB and highly recommend it, they have other styles as well specifically for the P-07.
Title: Re: What holsters fit the P-07?
Post by: heritage1865 on January 11, 2013, 02:52:33 PM: I'm going to try a Sticky Holster. Will post pics...
Title: Re: What holsters fit the P-07?
Post by: Jordan45_USMC on January 16, 2013, 09:37:17 PM: Just emailed the quality folks at Comp-Tac about the Minotaur MTAC holster and if they could make one to fit my duty...unfortunately they replied and said at the moment they were not building holsters for my pistol, BUT if they received enough interest on that model that they would definitely move towards making one.

I just put in my order for one anyways... it was either between the MTAC or a crossbreed, so since you can buy extra Kydex bodies for the holster to use for different pistols i decided to get one for my SA subcompact and an extra body for the holster for a 1911 and will just pray that they eventually get enough interest in the P-07 and ill just pay the $40 for a body if that happens.

If you have any interest in the MTAC I recommend emailing them and voicing that you would like to see the P-07 Duty listed on their options list!
Title: Re: What holsters fit the P-07?
Post by: VA_Alex on January 25, 2013, 11:15:06 AM: New to forum. I just ordered a pancake belt holster from holsterama, should ship today.
Title: Re: What holsters fit the P-07?
Post by: Mastodon on January 28, 2013, 11:35:16 AM: Are any of y'all using the Raven Concealment or Zero Concealment holsters, etc., with the light attached?
My P-07 came with the Nebo light from the factory. As close as I can tell, it nears the TLR-1 in size, etc. (NEBO not in drop down menu, on these sites)

Anyone using this or similar, with light attached.

Kydex would be new to in my world. But after a run with the light affixed at the range, I'm going to keep it on.

If anyone has experience with these or similar holsters, what say ye?
Title: Re: What holsters fit the P-07?
Post by: Twmaster on February 03, 2013, 12:54:06 AM: Just found a cool new thing on the CZ-USA web store. They have a spreadsheet that lists a whole lot of holsters for various CZ guns. Including the Duty!

Go here: http://shop.cz-usa.com/home.aspx and choose the holster list from the menu on the left.

I found that Fobus makes a kydex belt holster like the Comp-Tac and Blade-Tech holsters. Got the part number and found one on FeeBay for $24 shipped. It's called the Evolution series. From what I can tell it works just like my Blade-Tech.
Title: Re: What holsters fit the P-07?
Post by: Turb02 on February 03, 2013, 11:28:04 AM: http://pages.ebay.com/link/?nav=item.view&id=280874414611
(http://img.tapatalk.com/d/13/02/04/urugynyv.jpg)
(http://img.tapatalk.com/d/13/02/04/2upy9a3y.jpg)

Adjustable cant, left or right handed, black or natural color, and very fast shipping.

Ive got a relatively small frame and could wear this with my .40 under a tee shirt, unseen.

Cant beat it for 38 shipped

Sent from my Note 2, disregard any grammatical errors.
Title: Re: What holsters fit the P-07?
Post by: Ckole on February 04, 2013, 08:01:26 PM: I just bought a OWB Holster from Concealment Solutions. Very nice and very good quality. The OWB holster is $49.95. They also have an IWB option. They ship very quick. Mine arrived in less than a week.

http://concealmentsolutions.com/

There is a review on YouTube comparing to Crossbreed. Useful at least for the close up shots of both.

Note: my gun had too tight of a fit out of the box but I was able to make adjustments by heating and molding the Kydex. It was very easy to do. Concealment Solutions has a YouTube video describing how this is done.
Title: What holsters fit the P-07?
Post by: Ckole on February 06, 2013, 04:58:19 PM: Quote from: Turb02 on February 03, 2013, 11:28:04 AM
http://pages.ebay.com/link/?nav=item.view&id=280874414611
(http://img.tapatalk.com/d/13/02/04/urugynyv.jpg)
(http://img.tapatalk.com/d/13/02/04/2upy9a3y.jpg)

Adjustable cant, left or right handed, black or natural color, and very fast shipping.

Ive got a relatively small frame and could wear this with my .40 under a tee shirt, unseen.

Cant beat it for 38 shipped

I also ordered this because the price was attractive. It shipped very fast. The Kydex fit is excellent. No need to make any adjustments. I can't compare the quality to other IWB holsters. Hard for me to tell if the metal clips could be better, leather better, etc. I got the natural un-died leather. For my body I adjusted the clips up one hole for better concealment. I think if you are unsure whether you want an IWB holster this is a great one to try.

Most of the time I will wear the OWB Concealment Solutions holster and this one only for certain circumstances. Both are very good choices and won't break the bank.

Hope this helps someone's decision making process.
Title: Re: What holsters fit the P-07?
Post by: MikeT on February 09, 2013, 12:28:14 PM: Quote from: turbodieseli4i6 on March 03, 2011, 09:45:09 PM
I found this company from CZ forums, http://www.concealedtechnology.com/en/content/comfort-carry-bodyguard-tuckable-holster (http://www.concealedtechnology.com/en/content/comfort-carry-bodyguard-tuckable-holster)
I called Rob up and told him I had a P 07 Duty and he said no problem.

When I found out his business was is Springfield, I went to his shop and he made one for my P07 on the spot!
This holster feels and fits great! I think my P3AT will take a back seat to my Duty now.
This is a great holster at a great price imho.

Rob also said when I find a light laser combo that I liked, let him know what brand and he would make one for that also.
I give this guy a big thumbs up!

Just giving you guys a heads up on Concealed Technology. I saw this and other decent reviews on the internet and decided to take my business to a small business. Unfortunately, I had a terrible experience. I ordered to holster on 11/18 and never got a confirmation. I called and spoke to Rob on 12/6 and he told me he would get it out early next week (it was a Christmas present from my wife). In early January, I had heard nothing so I called and emailed again. He said he just hadn't gotten it out and was busy with work etc. but he was going to send it to me and give me a refund. I told him he didn't have to refund it but to do what he thought was right as long as he got it in the mail. Well, I continued to follow up as it never came. A total of 8 emails and calls. After that last conversation he ignored all of my correspondence. My wife ended up having to file a claim with the credit card company since it was on her card. So not only did he not deliver, tell me he would make it right then ignore me, but he also ticked off my wife! So as much as I like the look of this holster and as much as I like to support small businesses, I have to recommend against dealing with this company. It seems like more of a hobby he doesn't have time for to me. I ordered a Crossbreed super tuck last week... maybe I will get my Christmas present shortly after my birthday.
Title: Re: What holsters fit the P-07?
Post by: mrd04 on February 10, 2013, 10:07:08 AM: I also sent Rob emails with no luck on a response. Didn't bother following up with a phone call, going elsewhere.

Sent from my SCH-I605 using Xparent Skyblue Tapatalk 2
Title: Re: What holsters fit the P-07?
Post by: TiminKansas on February 16, 2013, 10:41:26 AM: Quote from: Belizejet on November 18, 2012, 08:07:45 PM
Blackhawk HK USP-C fits the PO-7 just fine. I use it for IDPA stuff.

2nd this, I had to tighten the passive retention screw before it would lock up every time and not pull out. Works great now.

*FYI, the Blackhawk IWB nylon size 01 does NOT fit due to the large trigger guard. I have, however, modified mine some and now it is comfortable.
Title: Re: What holsters fit the P-07?
Post by: wayne_i on February 20, 2013, 01:21:51 PM: The Blackhawk CQC (leather) holster fits the P07 nicely (about 1/4" of the barrel peeks out the end. This is their size 08 holster for the XD/XD compact and has an adjustable thumb strap and quick snaps to attach the holster to your belt.
An even less expensive solution (and even better fit) is the Crossfire Impulse holster. This one is a 3D thinly padded nylon holster that stays open even when you draw the gun. The P07 fits like they were made for each other. It is also very comfortable and will fit a large number of 4" barrel autos (even fits the Steyr M9).
Both will serve for CCW, with the Crossfire, at less than $30 (at Sportsmans Warehouse), being the most affordable I have found thus far.
Wayne
Title: Re: What holsters fit the P-07?
Post by: VA_Alex on February 20, 2013, 01:23:52 PM: FYI I bought one of these, shipped super quick. Fits great.

http://www.jbpholsters.com/servlet/the-33/LEATHER-GUN-HOLSTER-PANCAKE/Detail

I can post photos if anyone wants. I bought a black one.
Title: Re: What holsters fit the P-07?
Post by: Joe Little on February 27, 2013, 11:26:42 PM: Blackhawk Serpa level 2 fro USP *FULL SIZE* works. fit is snug and retention works.
Title: Re: What holsters fit the P-07?
Post by: leonredbone on February 27, 2013, 11:46:51 PM: Hello,

New to the forum.
This may have been mentioned, but has anyone tried http://extremeconcealment.com/index.php?main_page=product_info&cPath=25&products_id=17 ?

Seems like a nice holster.

Nick
Title: Re: What holsters fit the P-07?
Post by: glmtrm on February 28, 2013, 08:57:59 PM: I also have the Blackhawk Serpa. It does fit rather tightly but thr trigger catch does not engage. It seems the XD has a rounded trigger guard whereas the CZ has a more pointed trigger guard. Maybe a modification is in order???
Title: Re: What holsters fit the P-07?
Post by: Mastodon on February 28, 2013, 11:05:27 PM: Well, I have just ordered a holster for my P-07 w/light attachment from persecsystems.com

This will be my first Kydex holster. New frontiers...
Title: Re: What holsters fit the P-07?
Post by: bshepsoccer on March 02, 2013, 11:21:09 AM: Following the advice of a previous post I purchased a BlackHawk CQC SERPA Holster w/ Beltloop, Paddle, Right Hand, USP Compact, Black BW-HT-FFBAAE-410509BK-R $39.99 Color = Black Hand = Right Gun Model = Heckler & Koch USP Comp Fabric/Material = Injection Molded Polymer hasBundle = 1 Variant = BW-HT-FFBAAE-410509BK-R

It is a little tight going in, but draws real nice. I like the release mechanism. I like the belt loop better. Still trying to figure out the paddle.

I am new to the sport.
Title: Re: What holsters fit the P-07?
Post by: Chris3384 on March 02, 2013, 05:28:42 PM: Got mine on order from local company kydex... Called armordillo concealment in Tampa fl. Same quality as raven concealment but only 65.00
Title: Re: What holsters fit the P-07?
Post by: Chris3384 on March 03, 2013, 02:41:13 PM: Google foxx holsters I bought iwb just like galco king tuk but better for 39.00!! Hope this helps
Title: What holsters fit the P-07?
Post by: Ckole on March 04, 2013, 05:54:57 PM: I just received my IWB from White Hat Holsters and it is really nice. Light weight feel to it. Not that expensive and you can order different Kydex pieces for your different guns for $20 each.

For me it is more comfortable than the one mentioned a few posts up and worth the additional $25.

So take a look at what they offer. Two week free trial. If you are not happy you can send it back.

(http://img.tapatalk.com/d/13/03/05/e9ume4uv.jpg)

(http://img.tapatalk.com/d/13/03/05/zaty9eby.jpg)
Title: Re: What holsters fit the P-07?
Post by: benq on April 05, 2013, 08:01:27 PM: Add Black Dog Concealment to the list. Great price on products and shipping. Shipped the next day. My iwb holster is as comfortable as a holster can get.

+1 blackdogconcealment

http://www.blackdogconcealment.com/products/iwb-holsters/
Title: Re: What holsters fit the P-07?
Post by: Whaler on April 06, 2013, 04:24:15 PM: Here is my P-07 in a Remora OWB holster. I also have a Remora IWB for my Bersa .380. Very well made and fit great.

(http://i1055.photobucket.com/albums/s512/Whaler16/P07.jpg)
Title: Re: What holsters fit the P-07?
Post by: bobg on April 21, 2013, 02:54:27 PM: I just received my new horsehide pancake holster from Rocky River Leather Co. http://rockyriverleather.com/content/index.php/shop-online/holsters-and-accessories/pancake-horsehide/
and I am very impressed in regards to the quality of workmanship and the turnaround was only a week! Dave delivers a great product and service. http:// (http://imgdump.novarata.net/image.php?di=ZSG9)
Title: Re: What holsters fit the P-07?
Post by: briman4031 on April 22, 2013, 04:54:29 PM: Ordered one of the Fobus Evolution series holsters from eBay $24. Took about 2 weeks to get here from the mfg. in Israel (1/2 the price of US dealers). Initial impressions are that fit is good, as it should be on a custom holster. The holster definitely needs some 'breaking in'. Pulling the gun out the first few times was a real chore. After about 2-5 pulls, it's doing it's job. Just enough retention to prevent an unwanted grab, but not so much you can't grab it in a hurry. It's comfortable and lightweight. Nice holster for the money.

Here is a review. This guy's initial concern is the same thing I said. The fit is tight and needs broken in. This new model does come with a retention screw. He is also wrong in that his concern is lateral movement pulling away from the body. If you are drawing properly, your movement should be up and as close to the body as possible, and not out and away. Of course, this could all be model specific as well.

http://youtu.be/hViVSf1J7vU

The CZ model seems to be an upgraded model, as part of the Evolution 2 Series. The same as this glock.

http://youtu.be/6AoVGfd4g9k

http://www.ebay.com/itm/P07-DUTY-NEW-Fobus-PADDLE-Evolution-series-Holster-CZ-P-07-Duty-/261053708964

Not sure about runngun, but for $24, it's a nice holster.
Title: Re: What holsters fit the P-07?
Post by: Whaler on April 25, 2013, 12:19:13 PM: I believe that Remora offers that option.
Title: Re: What holsters fit the P-07?
Post by: laserdoc on April 25, 2013, 01:11:50 PM: Quote from: Whaler on April 25, 2013, 12:19:13 PM
I believe that Remora offers that option.
I looked at them but I do not see who sales them. Even their website does not have that option. Do you know where to get them??
Title: Re: What holsters fit the P-07?
Post by: Whaler on April 25, 2013, 01:39:57 PM: You have to click on "Online Store" at the top.
http://www.remoraholsterstore.com/ProductDetails.asp?ProductCode=OWB10-ART
Title: Re: What holsters fit the P-07?
Post by: CAROLINAKID on May 04, 2013, 02:38:38 PM: Extreme Concealment Holsters makes holsters for four model of CZ, including P07.
www.extremeconcealmentholsters.com

Go to the link above for pics. and models of holsters they make. Appear to be of very high quality
and they offer lifetime guarantee. You can read the rest on the site.

The Cobra model they offer is an OWB model which can be converted to IWB w/optional attachments.

Check them out.
Title: Re: What holsters fit the P-07?
Post by: boutaswell on May 17, 2013, 02:26:59 AM: Quote from: Twmaster on February 03, 2013, 12:54:06 AM
I found that Fobus makes a kydex belt holster like the Comp-Tac and Blade-Tech holsters. It's called the Evolution series.

I have had one of these for my P-07 for the best part of a year now and as holsters go, it's pretty good. Nothing super special, it does the job. The only problem I have found with it when trying to carry concealed is the holster does not pull the butt of the gun into the side, it actually makes the butt "tent" your shirt or jacket, that's how far mine sticks out.

I have been trying for that same year to find another holster, like the Blackhawk Serpa CQC (can't even tell I'm carrying my 1911 with this holster & T-shirt. With the Fobus, it's like a warning flag for concealment). I'm going to give a try to the Serpa XD 4in someone mentioned elsewhere. Hopefully, it fits well and the wear is as good for the P-07 as it is for my 1911.
Title: Re: What holsters fit the P-07?
Post by: chrisp51 on May 17, 2013, 04:08:09 PM: Please let us know if the P0-7 fits the Serpa holster without modification. I purchased the Fobus evolution holster and I have the same complaint.
Title: Re: What holsters fit the P-07?
Post by: Bdubbs on May 18, 2013, 05:02:30 AM: Quote from: boutaswell on May 17, 2013, 02:26:59 AM
Quote from: Twmaster on February 03, 2013, 12:54:06 AM
I found that Fobus makes a kydex belt holster like the Comp-Tac and Blade-Tech holsters. It's called the Evolution series.

I have had one of these for my P-07 for the best part of a year now and as holsters go, it's pretty good. Nothing super special, it does the job. The only problem I have found with it when trying to carry concealed is the holster does not pull the butt of the gun into the side, it actually makes the butt "tent" your shirt or jacket, that's how far mine sticks out.

I have been trying for that same year to find another holster, like the Blackhawk Serpa CQC (can't even tell I'm carrying my 1911 with this holster & T-shirt. With the Fobus, it's like a warning flag for concealment). I'm going to give a try to the Serpa XD 4in someone mentioned elsewhere. Hopefully, it fits well and the wear is as good for the P-07 as it is for my 1911.
You will want to get the serpa for a USP compact, not the XD. I read somewhere in this thread that the serpa for the xd doesn't work. I've got a serpa for a USP compact and my P07 fits. It's a bit tight but it works.
Title: What holsters fit the P-07?
Post by: Mastodon on June 03, 2013, 11:27:11 PM: (http://img.tapatalk.com/d/13/06/04/5yhy5yzy.jpg)

Personal Security Systems
persecsystems.com
Light Enabled Standard Holster
Lifetime Warranty

First ever kydex holster for me, but wanted to holster w light attachment. Been all leather/hides before.

It will take me some getting used to. Carried it today, OWB. Good retention, had to loosen it up a bit.

Sent from my iPhone using Tapatalk 2(http://img.tapatalk.com/d/13/06/04/egupy6yd.jpg)
Title: Re: What holsters fit the P-07?
Post by: PopQuiz on July 01, 2013, 10:56:47 AM: Hi Guys, found this holster: Black Mamba CE Full Cover (P-07) IWB, looks great. Anyone here heard of it or have used it?
Title: Re: What holsters fit the P-07?
Post by: boutaswell on July 01, 2013, 08:43:31 PM: Quote from: briman4031 on April 22, 2013, 04:54:29 PM
The holster definitely needs some 'breaking in'. Pulling the gun out the first few times was a real chore. After about 2-5 pulls, it's doing it's job. Nice holster for the money.

This was the first holster I purchased for my P07 but I found that the holster was set back on the paddle resulting in the butt of the gun having a "protrusion" problem. In other words, the butt had a serious "tenting" problem. It does do a good job of retention and has a screw to adjust.

As was posted elsewhere here(or somewhere), someone had mentioned about the Blackhawk Serpa for the SA XDM. I got one and the gun fit very well but as a bit, the holster just didn't seem to be near as tight as it was new. I looked at the holster thinking that I would cut it open where the retention screw was and remove some material allowing me to draw it tighter. I looked inside the holster and decided to remove the little plastic "keeper" that rode against the trigger guard. I was then able to tighten the holster enough that it fit the gun very tightly...tight enough to even produce a solid "thunk" as it slid around and gripped the trigger guard. It's a home mod that some won't like but it works very well for me and USPSA.

My $.02
Title: Re: What holsters fit the P-07?
Post by: rk5n on July 11, 2013, 07:27:53 PM: I'm looking at either the Fobus P-07 or the Serpa USP compact holster. Problem is that I have the threaded barrel version with the taller suppressor sights. The front sight measures .316" taller than the slide. Do either of these holsters have enough clearance?
Title: Re: What holsters fit the P-07?
Post by: joefbtg28 on July 19, 2013, 03:46:24 PM: Here is a shot of my Rocky River Leather Holster in Burgundy. I have liked it once I got it broken in. Pretty much just use it when I am camping, but it works well. The leather works dude even made mine slightly taller for the suppressor sites at no additional cost. Great guy to work with. I have some better shots taken with my dslr I will post up later.

https://rockyriverleather.com/content/index.php/shop-online/holsters-and-accessories/pancake-bullhide/ (https://rockyriverleather.com/content/index.php/shop-online/holsters-and-accessories/pancake-bullhide/)

(https://lh3.googleusercontent.com/-uozxJBj-q6A/Ucos2T_gb9I/AAAAAAAACPg/JdTXxSa1vhU/w1313-h985-no/IMG_20130419_173756.jpg)
Title: Re: What holsters fit the P-07?
Post by: joefbtg28 on July 19, 2013, 04:13:54 PM: Quote from: rk5n on July 11, 2013, 07:27:53 PM
I'm looking at either the Fobus P-07 or the Serpa USP compact holster. Problem is that I have the threaded barrel version with the taller suppressor sights. The front sight measures .316" taller than the slide. Do either of these holsters have enough clearance?

Fobus does not fit the taller suppressor sites. Mine is sitting in a box somewhere until I buy new sites.
Title: Re: What holsters fit the P-07?
Post by: TheStalker on July 20, 2013, 06:34:52 AM: Bravo Concealment now lists the P07 as an option for all their holsters if you like kydex with light/laser options.

Chris

And they can accommodate suppressor sights.
Title: Re: What holsters fit the P-07?
Post by: Mischievateur on July 29, 2013, 01:27:58 AM: El Paso Saddlery makes one for the XD9 that fits fairly well. Bought one at a gun show today.(http://img.tapatalk.com/d/13/07/29/yreheta5.jpg)

Sent from my GT-N8013 using Tapatalk 2
Title: Re: What holsters fit the P-07?
Post by: t0mmy0175 on July 31, 2013, 05:28:33 PM: Thanks just ordered this today!

Quote from: nickstone on December 18, 2012, 03:15:44 PM
Quote from: t0mmy0175 on December 18, 2012, 12:34:29 PM
I have a Crimson Trace CMR-203 green laser on mine, what holster would work with this setup?

You will probably have to get one special ordered. I was looking for an IWB with a Viridian C5L awhile back and not too many mfg had one for the P07 and a laser/light.

A quick check of some of the places I looked at showed the white hat holsters can make one for the P07 with a CT CMR-201.

http://www.whitehatholsters.com/MaxTuck-IWB-Hybrid-Holster-Jet-Black-Horsehide-p/black%20horsehide.htm (http://www.whitehatholsters.com/MaxTuck-IWB-Hybrid-Holster-Jet-Black-Horsehide-p/black%20horsehide.htm)

Some of the Custom Kydex makers could probably do one, but you would need to check with them.
Title: Re: What holsters fit the P-07?
Post by: billnchristy on August 07, 2013, 12:54:53 PM: I have an Ozarks Holster Co. IWB for mine.
Title: Re: What holsters fit the P-07?
Post by: Jon_4130 on August 14, 2013, 06:16:27 PM: With not a lot of options for holsters compared to other brands of guns I decided to make my own holster out of kydex. This turned out pretty well conceding this was my first holster. I?m planning on making a few more along with some mag pouches & refining what I?ve done. I took it out to the rang & it worked just fine & had good retention. To my surprise when I put my CZ 75 in it, it fit ok. With the big trigger guard on the P07 the CZ75 slid in & was snug. Well snug enough for the range

(http://i107.photobucket.com/albums/m293/jonm_01/Copyof1photo.jpg) (http://s107.photobucket.com/user/jonm_01/media/Copyof1photo.jpg.html)
Title: Re: What holsters fit the P-07?
Post by: FutureSailor on October 11, 2013, 06:33:43 PM: Alien Gear makes a IWB holster for the P-07 its pretty comfy with my one day of wearing it.
Title: Re: What holsters fit the P-07?
Post by: Clemson on November 01, 2013, 10:08:48 PM: http://ecx.images-amazon.com/images/I/31Hq91R0nRL.jpg(http://)

I am using this Gould and Goodrich Yaqui that I had bought for my Beretta and modified by making slightly thicker retention spacers with fuel hose. It is very secure, could run laps , but releases nicely with a firm up and slightly forward pull. Works for me.
Title: Re: What holsters fit the P-07?
Post by: Clemson on November 02, 2013, 03:26:44 PM: For those interested in the Yaqui mentioned above it is Gould and Goodrich B801-92F
Title: Re: What holsters fit the P-07?
Post by: DandC on November 22, 2013, 04:46:59 PM: Foxx Holsters makes some great P-07 holsters. I have this one and I really it.

http://foxxholsters.onlybusiness.com/OnlineCatalog/Hybrids_for_CZ_USA-details.aspx
Title: Re: What holsters fit the P-07?
Post by: TheStalker on November 30, 2013, 05:03:58 PM: Just got my Alien Gear Holsters in just short of 2 weeks and that includes being over Thanksgiving! Fastest I have received a holster to date by months!

http://aliengearholsters.com/index.php/home (http://aliengearholsters.com/index.php/home)

I bought a large (Sig 5" 1911), a medium (P-07/STI Spartan 4 1911) and a small (XDS).

(http://i446.photobucket.com/albums/qq190/ZsDS/bb2d5234-1290-4ca7-8523-30d623630a35_zpscb589a72.jpg)

(http://i446.photobucket.com/albums/qq190/ZsDS/4767e393-f5ae-470f-90d5-8b7cf9086934_zps74ef95d6.jpg)

Unfortunately my P-07 is off get some enhancements and the XDS is in for the recall work. When the P-07 is back I will update.

P-07 shell:

(http://i446.photobucket.com/albums/qq190/ZsDS/20131130_144226_zps495d4c8f.jpg)

I have not seen one bad review on these holsters.

To add to them; these are by far the one of the best, if not the best cross-breed tyope holster out there! The quality is excellent. The plastic/kydex is THICK! .093" vs .08" or .06". There is gonna be no need to have to remold these! Plus the shells are some of the best moldings I have seen for fitment.

I have been wearing my Scorpion since I got this afternoon and cant believe how comfortable it is. I will report back in a couple of weeks to see how it breaks in, but all the reviews i read say it's butter after about a week of wearing!

Everything is quality. The leather is thick 10-12 ounce. The plastic/kydex is the thickest i have seen and has has a better molding of the gun. It comes with a spare parts bag that has enough stuff to pretty much replace all the hardware! Some don't like the back of the leather, but I'm wearing mine right now against my skin and it's comfortable to me. No itching or scratching.

Probably one of the best things about these holsters is the shells are replaceable and can be swapped out with any other shell they have on any holster! Obviously if you have a large shell you wanna swap it to a large holster, but you can put it on a small holster if you choose too!

Chris
Title: Re: What holsters fit the P-07?
Post by: Whaler on December 15, 2013, 01:04:01 PM: I just had a cross draw holster made for my P-07 by Mernickle http://www.mernickleholsters.com/ and am very pleased with
it.

(http://i1055.photobucket.com/albums/s512/Whaler16/P07-Holster.jpg)
Title: Re: What holsters fit the P-07?
Post by: v_dubguy2004 on December 27, 2013, 05:58:16 PM: Just order my aliengear yesterday. Can't wait. Have been using a kydex for a 3.8 xd but dont like the belt loops on it
Title: Re: What holsters fit the P-07?
Post by: hrdguera on December 29, 2013, 05:48:51 PM: I prefer to use the Galco JAK228 and JAK228B. For my other favorite carries I use either the Galco JAK202 or JAK228 for a Steyr M9-A1, FNX-9, Glock 19, and Sig P226 MK25. I keep them in the holster for about a week in the case and soon the leather tends to accept the different shapes. I also use them inside the belt (outside the pants) and use the belt to adjust the tension. I have used a little mink oil or leather conditioner to help the leather adjust. I have a separate holster for each gun sometimes in either tan or black or both. Simple and easy.
Title: Re: What holsters fit the P-07?
Post by: czsmokey on January 26, 2014, 09:24:19 AM: hogue makes a line of holsters for the p-07 called the PowerSpeed line. it comes in three different models, Carry, Sport, and Duty. the price is:

Carry: $49.95
Sport: $69.95
Duty: $99.95

the Carry and Sport models are stage 1 retention and the Duty is stage 2 retension.
Title: Re: What holsters fit the P-07?
Post by: Chumley on January 26, 2014, 04:57:27 PM: I bought one from Ozark Holster, IWB, good price
Title: Re: What holsters fit the P-07?
Post by: Hdpearson13 on January 26, 2014, 10:55:21 PM: I uses a bladetech for outside and a great old faithful for inside. The old faithful build it yourself kit on eBay is 40 bucks and the most comfortable holster I ever wore inside the waist band It's easy to
Assemble and if you change sight you just file a little off top. It 75 if thy assemble it that's 35 bucks for 5 minutes of assembly.

Sent from my iPhone using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: Crimsoncloak on January 29, 2014, 01:07:04 PM: Stealthgear makes the Onyx for the P-07

http://www.stealthgearusa.com/pages/the-onyx

Not free at $99.95, but looks to be comfortable
Title: Re: What holsters fit the P-07?
Post by: v_dubguy2004 on January 31, 2014, 11:50:44 PM: Just got my aliengear iwb holster. Ordered day after christmas. Fits pretty well. Had to install the larger grommets for the kydex but oher than that been wearing it all day today at about the 4:30 position and it feels great.
Barley prints on me and I'm on the skinnier side 6'1 and 180lbs. Great deal for $45.
Title: Re: What holsters fit the P-07?
Post by: ARES on February 23, 2014, 09:25:29 PM: Not sure if this was mentioned, but Foxx makes a nice hybrid IWB for the P07. I bought one for my XDm Compact and loved it, its about a year old but still works great, so I went straight to them when I ordered my CZ P07. I bought mine for my new 2014 P07 and it fits perfectly. I chose the comfort backing on my new P07 holster and I REALLY like it, I wish they had that option when I bought my XDm holster. They also make good gun belts. I won't say they are the best because I've only ever used theirs, but it works for me.
Title: Re: What holsters fit the P-07?
Post by: phlydude on February 23, 2014, 10:05:17 PM: Cardon holsters www.cardonholsters.com has holsters (both IWB and OWD) for the CZ 75 P07
Title: Re: What holsters fit the P-07?
Post by: ARES on March 08, 2014, 04:09:01 PM: I just received a new leather OWB holster from BearRiverHolsters.com and it is very nice. It fits my new 2014 P07 perfectly. Great customer service too. I'll post some pictures in a couple of days, after I have a chance to wear it a bit.
Title: Re: What holsters fit the P-07?
Post by: Mach Z on March 13, 2014, 12:47:12 AM: Jpbholsters have both IWB and OTW holsters that work with multiple guns.
Title: Re: What holsters fit the P-07?
Post by: big_al on March 14, 2014, 01:02:12 AM: Just ordered the A2 Dual Carry from

http://mtrcustomleather.net/gun-holsters/

Can't wait!
Title: Re: What holsters fit the P-07?
Post by: P07_pointer on March 17, 2014, 11:02:31 AM: I ordered an alien gear holster that should be coming in this week. It's similar to a crossbreed but it's 36 shipped. I will let you guys know how it fits.
Title: Re: What holsters fit the P-07?
Post by: StatonX on April 19, 2014, 01:09:01 PM: Made contact with G-Code Holsters if everyone submits a demand for holster to them they may just make for the cz p07 and po9 thats my suggestion. any how this is what i msg them and there reply..

"Conversation started April 10
StatonX
4/10, 8:12pm
StatonX
Hello does the Incog - Weapon: 080_Sphinx_SDP Sphinx SDP 9mm
also fit the CZ PO7? Alot of people on the cz forum would love to purchase the incog if it fits. Unless your company will be making the incog specific for the cz... Please dont ignore just need a yes or no in regards to the fit thanks. your products rock keep up the good work!!!!
Friday
G-Code Holsters
4/18, 7:01pm
G-Code Holsters
I don't know I need to get my hands on a CZ to see. Officially though I never recommend that you use a gun in one of our holsters that it was not designed for."

Considering they do holsters for the sphinx sdp and its basically the same design as the po7 i am really curious if it fits. If anyone wants to order 1 and try i think it would be more of a positive fit than an negative fit...

I rem. reading that a forum member sent them a msg and they didn't reply well took them a few days but they replied. There not so bad after all..
Title: Re: What holsters fit the P-07?
Post by: loic on April 25, 2014, 08:57:33 AM: I just received yesterday my holster (kydex) from bladetech for my 07 and 09 for open carry and.... I dont like them... :-(
So I need to keep looking, what I am looking for is something like the holster I bought directly from cz for my phantom, it is not the pretiest one but its very sturdy and I want to have the thumb release or some retention mechanism, again its for open carry. For concealed carry I have the highnoon holster that are just perfect (after some break in)

Sent from my SPH-L710 using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: NWG19 on May 01, 2014, 03:27:42 PM: Quote from: loic on April 25, 2014, 08:57:33 AM
I just received yesterday my holster (kydex) from bladetech for my 07 and 09 for open carry and.... I dont like them... :-(

Let me know your price if you want to sell that 09 holster.
thanks, tom
Title: Re: What holsters fit the P-07?
Post by: Cyanide on May 09, 2014, 04:12:48 PM: I use leather Winthrop IWB holsters with retention loops for all of my carry pistols and they work great for me.

My set-up with a Safariland horizontal spare magazine pouch...(http://img.tapatalk.com/d/14/05/10/gehezy4u.jpg)
Title: Re: What holsters fit the P-07?
Post by: Cyanide on May 17, 2014, 03:20:47 PM: Here's another holster (made by MTR Custom Leather) that I am strongly considering since it can be used as an IWB with a flat leather backing similar to a traditional leather Kydex hybrid holster, or, as an OWB paddle holster.(http://img.tapatalk.com/d/14/05/18/he5e5enu.jpg)My apologies they advertise it with a 1911 inserted lol!
Title: Re: What holsters fit the P-07?
Post by: helopigs on June 14, 2014, 12:53:08 PM: On Monday I received my Alien Gear IWB holster, one month after I ordered it. I am still waiting to receive my permit, but have been wearing it around the house for a few hours each day.

I wear it with a new Hanks Amish 1.5" leather belt (which I highly recommend), and am pretty satisfied with the setup's comfort.
Title: Re: What holsters fit the P-07?
Post by: robpa on June 23, 2014, 03:54:34 PM: I just this AM ordered a Slide Guard, 8 week wait. She said they have been running a 12 week wait..
Title: Re: What holsters fit the P-07?
Post by: jrayy on June 24, 2014, 04:07:53 PM: I just ordered a Bladetech OWB kydex holster with paddle and loop attachments. Estimated wait was 4 to 5 weeks, but it ARRIVED today in less than 3! Super fast turn around.

As far as IWB holsters go, I could not be happier with my Aliengear holster. Super comfortable, durable, adjustable awesomeness. It did take about 4 or 5 weeks to arrive.
Title: Re: What holsters fit the P-07?
Post by: CzechEm on July 14, 2014, 02:26:01 AM: Here's the Falco IWB holster I'm using. 1.5 inch belt size.
Like the quality, so I might try them again for their mag pouches.

(http://s12.postimg.org/wo8y22gzh/P101132.jpg)
Title: Re: What holsters fit the P-07?
Post by: AlexandRyanDesign on July 15, 2014, 10:58:48 PM: (http://img.tapatalk.com/d/14/07/16/9yza5azu.jpg)

I make these!
Title: Re: What holsters fit the P-07?
Post by: Storz on July 18, 2014, 10:03:48 AM: KT Mech Gunfighter

One week from order to door :-)

(http://img.tapatalk.com/d/14/07/18/ebagugud.jpg)

Sent from my HTC One_M8 using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: FakeCZName on July 30, 2014, 03:26:48 PM: I love my FALCO IWB leather holster for my P-07.

They are made to fit the P-07 exactly. Beautiful leather, well crafted and stitched. I like it so well, I carry other guns in it too (at first to help break it in, but now just because it is the most comfortable holster I own.)

I don't have picture to post but if you go to their website, you will see how nice they are. The website name is:

CRAFT HOLSTERS--Falco worth more than what you pay.
Title: Re: What holsters fit the P-07?
Post by: muggia59 on July 30, 2014, 09:07:28 PM: Received my IWB P07 holster last week from High Noon. Great fit, and the quality is definetly tops. Going to check out MTR for a crossdraw for the Rami. I liked what I saw on their web page.
Title: Re: What holsters fit the P-07?
Post by: big_al on July 30, 2014, 09:28:20 PM: Quote from: muggia59 on July 30, 2014, 09:07:28 PM
Received my IWB P07 holster last week from High Noon. Great fit, and the quality is definetly tops. Going to check out MTR for a crossdraw for the Rami. I liked what I saw on their web page.

MTR makes a great product! I have their Dual Carry for my P07. Awesome fit, wearable in multiple positions and comfortable.
There was also not a very long turnaround time from order to delivery.
Top-notch holster, in my humble opinion.
Title: Re: What holsters fit the P-07?
Post by: muggia59 on July 31, 2014, 12:35:37 AM: Thanks for the info.
Title: Re: What holsters fit the P-07?
Post by: AlexandRyanDesign on August 07, 2014, 05:44:10 PM: (http://img.tapatalk.com/d/14/08/08/aduny8eb.jpg)
Title: Re: What holsters fit the P-07?
Post by: Storz on August 08, 2014, 08:28:55 AM: KT Mech Gunfighter

(http://img.tapatalk.com/d/14/08/08/uhu8asy4.jpg)

Sent from my HTC One_M8 using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: big_al on August 08, 2014, 10:19:26 AM: Here's my MTR Dual Carry. Great holster. Awesome quality!
(http://img.tapatalk.com/d/14/08/08/yqadanuh.jpg)
Title: Re: What holsters fit the P-07?
Post by: Cyanide on August 08, 2014, 11:17:05 AM: Big_al, on your MTR on the sweatguard behind the decocker reinforced with stitching. That's my one gripe with my Winthrop, just a flimsy, thin piece of leather there that yes, works but can fold down when reholstering.

Just ordered the MTR Sentinel myself. Can't wait to get it in a few weeks!
Title: Re: What holsters fit the P-07?
Post by: big_al on August 08, 2014, 11:57:35 AM: No stitching on the sweat guard. (http://img.tapatalk.com/d/14/08/08/qu2a5usu.jpg)
(http://img.tapatalk.com/d/14/08/08/ypuhave8.jpg)
The leather is firm and fairly substantial, though. It's about the thickness of two, stacked quarters. Pic isn't the best, I know.
(http://img.tapatalk.com/d/14/08/08/emary5an.jpg)
I wear mine IWB almost exclusively and haven't had an issue with catching on the sweat guard when reholstering. I can't say for sure that it won't happen as the leather softens through the years though.
Title: Re: What holsters fit the P-07?
Post by: Cyanide on August 09, 2014, 04:28:16 PM: Thanks!
Title: Re: What holsters fit the P-07?
Post by: shaneruss on September 06, 2014, 08:59:51 PM: Late to the holster party here...I know there are more options now as the P07 is getting more popular, both leather and kydex. If it hasn't been brought up yet check out JM Custom Kydex. I ordered an AIWB holster in June and just unboxed it today. It is the best holster I have owned and I would not hesitate to recommend it to anyone. Excellent workmanship and it carries very comfortably in a normally uncomfortable place. Retention is great(adjustable) and my CZ disappears under a t-shirt in this holster. All of the edges are rolled, extra tuck option that really helps if you(I) have a little too much table muscle. Very reasonable price for the quality.
Title: Re: What holsters fit the P-07?
Post by: Viking343 on September 06, 2014, 10:13:52 PM: Quote from: shaneruss on September 06, 2014, 08:59:51 PM
Late to the holster party here...I know there are more options now as the P07 is getting more popular, both leather and kydex. If it hasn't been brought up yet check out JM Custom Kydex. I ordered an AIWB holster in June and just unboxed it today. It is the best holster I have owned and I would not hesitate to recommend it to anyone. Excellent workmanship and it carries very comfortably in a normally uncomfortable place. Retention is great(adjustable) and my CZ disappears under a t-shirt in this holster. All of the edges are rolled, extra tuck option that really helps if you(I) have a little too much table muscle. Very reasonable price for the quality.
Can you post a pic or two? I'd like to see it.
Title: Re: What holsters fit the P-07?
Post by: shaneruss on September 08, 2014, 04:08:30 PM: will do as soon as I figure out my phone/email/photobucket thing again...
Title: Re: What holsters fit the P-07?
Post by: shaneruss on September 18, 2014, 06:02:49 PM: Sorry it took so long, but here are the pics of the JM Custom Kydex AIWB for the P07. Great holster and great customer service. The magazine carrier has holes on both sides so the clip can reversed for IWB or OWB.

(http://i302.photobucket.com/albums/nn99/russphoto08/0907141257.jpg) (http://s302.photobucket.com/user/russphoto08/media/0907141257.jpg.html)

All of the edges are rolled and tension is adjustable on the holster and the magazine holder

(http://i302.photobucket.com/albums/nn99/russphoto08/0907141256.jpg) (http://s302.photobucket.com/user/russphoto08/media/0907141256.jpg.html)

(http://i302.photobucket.com/albums/nn99/russphoto08/0907141255a.jpg) (http://s302.photobucket.com/user/russphoto08/media/0907141255a.jpg.html)

(http://i302.photobucket.com/albums/nn99/russphoto08/0907141255.jpg) (http://s302.photobucket.com/user/russphoto08/media/0907141255.jpg.html)

(http://i302.photobucket.com/albums/nn99/russphoto08/0907141255.jpg) (http://s302.photobucket.com/user/russphoto08/media/0907141255.jpg.html)
Title: Re: What holsters fit the P-07?
Post by: Makaroviii on October 06, 2014, 09:35:11 PM: Here's another High Noon Holster product. I won the competition High Noon had on their FaceBook page and decided on the Public Secret W/Straps in black. This is my second High Noon product, the other being a Bare Skin Holster I picked up for my Makarov a year ago. The Public Secret is high quality, secure and comfortable. The smooth side of the cowhide is inside while the rough side is on the outside of the holster for added traction in keeping the holster in place during the draw. It rides high, I prefer low ride, but still conceals well.

(http://i1336.photobucket.com/albums/o652/Makarovii/IMG_2734_zpsc73ffa00.jpg)
(http://i1336.photobucket.com/albums/o652/Makarovii/IMG_2736_zpsaafecbe0.jpg)
(http://i1336.photobucket.com/albums/o652/Makarovii/IMG_2745_zps70766d83.jpg)
Title: Re: What holsters fit the P-07?
Post by: my65swede on October 18, 2014, 09:10:10 PM: Has anyone ever tried this holster:

http://www.ebay.com/itm/291179504739?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Title: Re: What holsters fit the P-07?
Post by: boosted23 on October 18, 2014, 09:51:27 PM: K(http://tapatalk.imageshack.com/v2/14/10/18/de2a416c808fa3db0715cc7a80ccff12.jpg)
My aliengear iwb tuck 2.0 holster for my p07. It was $45 shipped. I love it. Worth the wait.
Www.aliengearholster.com
Lifetime warranty and lifetime shell change if you change weapons. No need to buy another holster.
Title: Re: What holsters fit the P-07?
Post by: my65swede on October 19, 2014, 05:39:56 PM: Well I ordered the IMI Defense holster for the USP compact. If anything I'll at least be able to answer the question for the forum.
Title: Re: What holsters fit the P-07?
Post by: my65swede on November 09, 2014, 07:06:09 PM: The verdict is in: It does not fit :'( I ordered the SERPA.
Title: Re: What holsters fit the P-07?
Post by: v_dubguy2004 on November 16, 2014, 02:02:45 AM: My65swede. I have a holster similar to that but its made for a Springfield xd. Fits perfectly and the lock works as well.
Title: Re: What holsters fit the P-07?
Post by: Alpha Sierra on November 16, 2014, 09:39:06 AM: I will never understand the attraction to SERPAs and its knockoffs. Quite possibly the worst holster design in history.

They don't even conceal well.
Title: Re: What holsters fit the P-07?
Post by: djcantr on November 17, 2014, 11:48:13 PM: Got a StealthGear Onyx hybrid IWB holster today. I had ordered it for the P-07 I got a couple weeks ago. It's my first gun for IWB carry. I had just previously pocket carried a S&W 442 or Ruger LC9 but was wanting to try the P-07 IWB. My pants are usually relatively snug and fit well, so they were really tight with the Onyx and P-07 IWB. Aside from that, it was very comfortable and concealed well. I like the soft backing and it conformed to my waist well. I ordered a couple pairs of jeans one inch larger in the waist. Really looking forward to carrying the P-07 often.
Title: Re: What holsters fit the P-07?
Post by: Rotten on December 08, 2014, 11:03:14 PM: Quote from: StatonX on April 19, 2014, 01:09:01 PM
Made contact with G-Code Holsters if everyone submits a demand for holster to them they may just make for the cz p07 and po9 thats my suggestion. any how this is what i msg them and there reply..

"Conversation started April 10
StatonX
4/10, 8:12pm
StatonX
Hello does the Incog - Weapon: 080_Sphinx_SDP Sphinx SDP 9mm
also fit the CZ PO7? Alot of people on the cz forum would love to purchase the incog if it fits. Unless your company will be making the incog specific for the cz... Please dont ignore just need a yes or no in regards to the fit thanks. your products rock keep up the good work!!!!
Friday
G-Code Holsters
4/18, 7:01pm
G-Code Holsters
I don't know I need to get my hands on a CZ to see. Officially though I never recommend that you use a gun in one of our holsters that it was not designed for."

Considering they do holsters for the sphinx sdp and its basically the same design as the po7 i am really curious if it fits. If anyone wants to order 1 and try i think it would be more of a positive fit than an negative fit...

I rem. reading that a forum member sent them a msg and they didn't reply well took them a few days but they replied. There not so bad after all..

Contacted g-Code last week and got the same response. It appears they have no interest in just buying a blue gun and making a holster. I even assured them I would buy one but got the same non-committal response. I went ahead and got the Fobus paddle holster. Haven't hit the range with it yet but it was under $30- on Amazon. Ordered it Friday and it was delivered Sunday afternoon. Barring rain I will shoot with it tomorrow. I hope it works better than my P-07 which has given me nothing but a headache so far.
Title: Re: What holsters fit the P-07?
Post by: CAK on December 11, 2014, 03:25:08 PM: Just ordered this from Amazon for $11.50! Figured for $11 bucks why not.

(http://ecx.images-amazon.com/images/I/91a2qiOLBoL._SL1500_.jpg)

Looks like a decent, open top nylon Kydex hybrid paddle design with a velvet lined inside to help protect the gun finish. Should make for a nice basic range holster.

http://www.amazon.com/gp/product/B00E92QTNM/ref=od_aui_detailpages00?ie=UTF8&psc=1 (http://www.amazon.com/gp/product/B00E92QTNM/ref=od_aui_detailpages00?ie=UTF8&psc=1)
Title: Re: What holsters fit the P-07?
Post by: Rotten on December 14, 2014, 08:00:31 PM: I took the Fobus holster to the range and a major design flaw quickly became apparent. The sight channel is an itty bitty thing that is an exact fit for the P-07. This causes undue drag on the draw as well as making it unnecessarily difficult to reholster. If you are not careful, the gun twists as the sight post catches and twist the whole gun sideways. It also came out of the holster with big peeling strips of plastic stuck to the front sight on the draw. You can see in the pictures how chewed up it is getting already (upper holster). Shown for for comparison is a Fobus 9mm Glock holster which not only has a much more user friendly sight post channel, the overall length is much better as well. It seems as if this was designed for a P-09 and the P-07 leaves the bottom inch of the sleeve unused. The Glock holster is simple and intuitive yet the CZ one from the same company is just frustrating. If they had used the same principals used with the Glock version this holster would be a steal at only $30 from Amazon.

I also believe this holster is unlikely to accommodate any taller front sight posts if the user wants to swap out the sights for a FO set from CGW or CZC.

(http://i18.photobucket.com/albums/b109/Rotten_Totten/IMG_2113_zps45c7cb45.jpg) (http://s18.photobucket.com/user/Rotten_Totten/media/IMG_2113_zps45c7cb45.jpg.html)

(http://i18.photobucket.com/albums/b109/Rotten_Totten/IMG_2116_zps5a4e8fcf.jpg) (http://s18.photobucket.com/user/Rotten_Totten/media/IMG_2116_zps5a4e8fcf.jpg.html)
Title: Re: What holsters fit the P-07?
Post by: fusegsp on January 03, 2015, 12:38:20 PM: I didn't read through all 12 pages, but just in case it hasn't been mentioned, PJ Holsters makes concealment holsters for the P07. I got a demo model that was used by Paul for photos so I didn't have a long wait time.
Title: Re: What holsters fit the P-07?
Post by: Tobuk on January 07, 2015, 06:31:46 PM: Quote from: Rotten on December 14, 2014, 08:00:31 PM
I took the Fobus holster to the range and a major design flaw quickly became apparent. The sight channel is an itty bitty thing that is an exact fit for the P-07. This causes undue drag on the draw as well as making it unnecessarily difficult to reholster. If you are not careful, the gun twists as the sight post catches and twist the whole gun sideways. It also came out of the holster with big peeling strips of plastic stuck to the front sight on the draw. You can see in the pictures how chewed up it is getting already (upper holster). Shown for for comparison is a Fobus 9mm Glock holster which not only has a much more user friendly sight post channel, the overall length is much better as well. It seems as if this was designed for a P-09 and the P-07 leaves the bottom inch of the sleeve unused. The Glock holster is simple and intuitive yet the CZ one from the same company is just frustrating. If they had used the same principals used with the Glock version this holster would be a steal at only $30 from Amazon.

I also believe this holster is unlikely to accommodate any taller front sight posts if the user wants to swap out the sights for a FO set from CGW or CZC.

If you take the time to file/sand out that holster a little bit, it works great. I had the same issue with the sight, and just a generally too-tight fit on the holster. Took about an hour with some sand paper to relieve enough material to make it work well. I also took a razor knife to the end of the holster and cut it off so it's only 1/8" longer than the pistol. I sanded down all the rough edges with some 800 grit sandpaper, and everything feels/looks just about as good as factory.

I should take a couple of pictures...
Title: Re: What holsters fit the P-07?
Post by: mmashburn85 on January 07, 2015, 09:22:58 PM: I tried quite a few of the BlackHawk Serpa holsters at my LGS and all of them were too small for my 2014 P-07, including the H&K USP Compact. I am considering getting a BladeTech OWB paddle holster. Does anyone have one of these? If so, what are your thoughts?
Title: Re: What holsters fit the P-07?
Post by: benq on January 08, 2015, 12:18:37 AM: I had the same experience as Rotten. My last two holster purchases, I made sure to ask about the sight channel and if they could be made taller to accommodate any future FS upgrades. Currently wearing Hidden hybrid IWB and waiting for an OWB from Dara Holsters.
Title: Re: What holsters fit the P-07?
Post by: FakeCZName on January 08, 2015, 10:44:27 AM: I don't care for SERPA holsters. Just not a good carry holster.

I have been using a FALCO IWB "tuckable" mahogany leather holster for my P-07 for over a year now.

Best most comfortable holster I have ever had. I even carry my other guns in it because it is just so comfortable and easy to conceal.

I had a leathersmith sew the tuckable belt loop strap to the holster since I prefer not to tuck my shirt.

FALCO makes good holsters--custom to fit the P-07 or P09. It takes them a while, but the workmanship is A++.

They also make OWB holsters if that's what you want.
Title: Re: What holsters fit the P-07?
Post by: shakazulu12 on January 17, 2015, 01:49:06 PM: I've been reading this thread now for an hour. I just want to thank all of those who have posted pics and their experiences. I've been carrying in an Alien Gear hybrid for a while now. I'm not sure what happend, may have been that I've lost a ton of fat and put on 20 pounds of muscle, but the more I use it, the less I like it these days. I'm 5'11" 175-180 now (but 30 inch waist) so now looking at the AIWB options and something else that I can wear from 3-5.
Title: Re: What holsters fit the P-07?
Post by: FakeCZName on January 17, 2015, 02:29:36 PM: shakazulu12:

If you are looking for a well made IWB for the P-07 czech out this link:

http://www.craftholsters.com/cz-p07-duty-iwb-holsters (http://www.craftholsters.com/cz-p07-duty-iwb-holsters)

Looks like they offer 22 different carry options tailor made to fit the P-07 (the leather ones are made to fit the P-07 perfect fit, I know, because I have one).
Title: Re: What holsters fit the P-07?
Post by: viking499 on January 17, 2015, 02:33:27 PM: Who makes a good OWB holster for the new model P-07?
Title: Re: What holsters fit the P-07?
Post by: FakeCZName on January 17, 2015, 02:36:21 PM: Viking: For OWB holsters for the P-07, czech out:

http://www.craftholsters.com/cz-p07-duty-holsters (http://www.craftholsters.com/cz-p07-duty-holsters)

Wow, they even make a beautiful leather crossdraw holster! Wasn't someone asking for a crossdraw P-07 holster?
Title: Re: What holsters fit the P-07?
Post by: FakeCZName on January 17, 2015, 02:51:47 PM: Here is a P-07 holster that ought to please everybody. IWB/OWB and if you look at the pictures--it is even somewhat tuckable! I wish they had been making this one when I ordered my IWB from them for my P-07. This is pretty cool for function and it doesn't look like they sacrificed quality to do it--it is just clever.

http://www.craftholsters.com/leather-iwbowb-concealed-carry-holster-falco (http://www.craftholsters.com/leather-iwbowb-concealed-carry-holster-falco)
Title: Re: What holsters fit the P-07?
Post by: viking499 on January 17, 2015, 02:54:16 PM: Will holsters for the old style 07's fit the new style 07's?

What other brands of guns are similar to the newer style 07 model?
Title: Re: What holsters fit the P-07?
Post by: shakazulu12 on January 17, 2015, 05:26:27 PM: Quote from: FakeCZName on January 17, 2015, 02:51:47 PM
Here is a P-07 holster that ought to please everybody. IWB/OWB and if you look at the pictures--it is even somewhat tuckable! I wish they had been making this one when I ordered my IWB from them for my P-07. This is pretty cool for function and it doesn't look like they sacrificed quality to do it--it is just clever.

http://www.craftholsters.com/leather-iwbowb-concealed-carry-holster-falco (http://www.craftholsters.com/leather-iwbowb-concealed-carry-holster-falco)

Looks like a VMII clone. I haven't checked the Milt Sparks site yet, but the VMII is my favorite holster for steel guns. For some reason I didn't like it as much with my G19. This looks like a good option to see if I would, particularly at the price.

Anyone try a High Noon holsters with the metal clip? I'm thinking of ordering the Mr Softy and a Bare Asset, then if I like the concept just ordering the heavier duty versions they offer and selling off the cheap ones. The CZ is a new platform for me and the toughest part is learning which holsters will work it seems.

Edit: Checked out the rest of the holsters linked by FakeCZname, think I'm going to try a few of them out. Didn't realize they were Falco, always heard good things about them though I haven't personally experience done. I need to post here more!
Title: Re: What holsters fit the P-07?
Post by: FakeCZName on January 18, 2015, 02:09:05 PM: Viking499: I don't see why these Falco holsters wouldn't fit both the old and the new P-07s. The dimensions of the two are pretty much the same.
Title: Re: What holsters fit the P-07?
Post by: mmashburn85 on January 29, 2015, 07:16:50 PM: Is this a good deal on a holster?

http://shop.cz-usa.com/ProductDetail/512510_Plastic-P07-Drop-Leg-Holster-With-Magazine-Pouch
Title: Re: What holsters fit the P-07?
Post by: big_al on January 29, 2015, 08:18:52 PM: Quote from: mmashburn85 on January 29, 2015, 07:16:50 PM
Is this a good deal on a holster?

http://shop.cz-usa.com/ProductDetail/512510_Plastic-P07-Drop-Leg-Holster-With-Magazine-Pouch

I would think so. It's 50% off...
Title: Re: What holsters fit the P-07?
Post by: ollieholic on February 06, 2015, 01:18:05 AM: I have a

http://www.blackpointtactical.com/shop/leather-wing/

Different from the current crop of holsters but definitely comfy. Top quality and only took a week n a half to come in. The holster is currently in my locker at work... I'll post pictures next week.
Title: Re: What holsters fit the P-07?
Post by: rhart on February 12, 2015, 08:28:26 PM: I've ordered the Theis EZ Clip holster - kydex with leather backing. Can be worn IWB or between the pants and belt. Easy on and off they say. Be about three more weeks I think.
Title: Re: What holsters fit the P-07?
Post by: ocny17 on February 15, 2015, 09:41:22 PM: 'Had a hard time finding an IWB holster for the P07 w/ a light/laser, but I finally found one that looks like it'll do the job. It's different from the usual leather, nylon, kydex holsters. First of all, it doesn't use a clip, so this may be a good thing for some but may not work for others. I haven't received it yet, but it's the Series 10 from Remora Holsters:

(http://cdn3.volusion.com/wuczc.futky/v/vspfiles/photos/Series10-2T.jpg?1416501566)

http://www.remoraholsterstore.com/

You can choose "Build Your Holster" and go through the wizard, then specify the color, light/laser/etc. At $16.95 + shipping ($6.20 to NY), it's rather inexpensive for what's being referred to as a unique, effective, all-American made holster.

I saw a few other brands of universal clipless 'sticky/tacky' material holsters that look similar and are getting decent reviews as well. I'll post a follow up once I receive it and try it out.

Edit: Forgot to mention that they do have ones that have clips as well.
Title: Re: What holsters fit the P-07?
Post by: mmashburn85 on February 24, 2015, 09:53:09 PM: I just got the Hogue PowerSpeed Holster for the P-07, and it is the best one I have tried so far. Comes with both Paddle and belt loop configuration:

http://www.hogueinc.com/store/categories/cz-p-07/1071
Title: Re: What holsters fit the P-07?
Post by: copemech on February 24, 2015, 11:40:30 PM: Can you show us just how it works?
Title: Re: What holsters fit the P-07?
Post by: eliguzman10 on February 26, 2015, 01:07:21 AM: So I've seen that hk 45 C will do the trick or the USP(no idea if they are the same) I saw these 2 holsters... will someone confirm which one of these 2 will fit please? LOL I'm a bit confused. and want a sure fit for my CZ P07. Please and thank you in advance.

http://www.hkparts.net/shop/pc/SIGTAC-Paddle-Holster-For-HK45-HK45C-213p1974.htm (http://www.hkparts.net/shop/pc/SIGTAC-Paddle-Holster-For-HK45-HK45C-213p1974.htm)
http://www.hkparts.net/shop/pc/SIGTAC-Paddle-Holster-For-HK-USP-45-Full-Size-Pistol-p1973.htm (http://www.hkparts.net/shop/pc/SIGTAC-Paddle-Holster-For-HK-USP-45-Full-Size-Pistol-p1973.htm)
Title: Re: What holsters fit the P-07?
Post by: mmashburn85 on February 26, 2015, 03:23:03 PM: Quote from: copemech on February 24, 2015, 11:40:30 PM
Can you show us just how it works?

Hopefully this will be a helpful demo on the Hogue PowerSpeed holster that I just got:

http://youtu.be/dgaRgpGql5E

It also comes with a belt loop attachment, but I forgot to show that in the video
Title: Re: What holsters fit the P-07?
Post by: mmashburn85 on February 26, 2015, 03:40:27 PM: Quote from: mmashburn85 on January 29, 2015, 07:16:50 PM
Is this a good deal on a holster?

http://shop.cz-usa.com/ProductDetail/512510_Plastic-P07-Drop-Leg-Holster-With-Magazine-Pouch

** Update ** This holster did NOT fit my 2014 P-07. It fits perfectly but the trigger guard prevents it from going in all the way and locking into place. With some dremmel modifications to the trigger guard bumper area in the holster, it might work fine. I was very disappointed because it was so close to locking into place, but no amount of force helped.
Title: Re: What holsters fit the P-07?
Post by: ocny17 on February 27, 2015, 07:10:37 PM: Just following up since I just received the Remora Series 10 IWB clipless ambidextrous holster for my P07 w/ a Viridian C5L-R light+laser. Fit is great and really holds the gun quite snug, no wiggling at all. Its semi tacky surface keeps it secure, even when I'm just wearing sweatpants and jumping, sitting, running, etc. It's not bulky, and it's really very comfortable. Besides function & form, it's only $16.95 + shipping.

Check out the video review below:

https://www.youtube.com/watch?v=iM9zArpmSV0

Note: In retrospect, I should've ordered the reinforced top (RFT) for another $6 to keep the top open for easier reholstering. Watch the video @ 2:30 timer that compares the IWB RFT vs. IWB regular.

Anyway, check it out for yourself:

http://www.remoraholsterstore.com/category-s/2083.htm

I started with Build Your Holster and chose the CZ P-07 Duty (doesn't matter if you have the Duty or 2014 version). Then you'll just need to select one of the following options:
Inside the Waistband (IWB)
Shoulder Rig
Outside the Waistband (OWB /IWB)
Ankle Holsters With Thigh & Calf Strap Options
Reinforced Top (RFT)
Tuckable - Inside the Waistband (IWB)

I would suggest getting the reinforced top (RFT) to allow reholstering w/o having to pull out the holster from inside the waistband first. It took nearly 2 weeks from ordering to receiving it in the mail since they had to build it to my specifications. They shipped it with a free accessory -- a spare magazine holster. Can't beat this value, that's for sure.
Title: Re: What holsters fit the P-07?
Post by: ollieholic on March 12, 2015, 01:35:40 PM: (http://i12.photobucket.com/albums/a240/coliefirjole/IMG_0472_zpsdz25kuhn.jpg)
Title: Re: What holsters fit the P-07?
Post by: ollieholic on March 12, 2015, 01:36:32 PM: (http://i12.photobucket.com/albums/a240/coliefirjole/IMG_0473_zps8lvrnjhg.jpg)
Title: Re: What holsters fit the P-07?
Post by: ollieholic on March 12, 2015, 01:37:05 PM: (http://i12.photobucket.com/albums/a240/coliefirjole/IMG_0474_zpsrkal6lbx.jpg)
Title: Re: What holsters fit the P-07?
Post by: viking499 on March 12, 2015, 09:39:33 PM: What holsters fit the new model P-07? I am looking for something OWB?
Title: Re: What holsters fit the P-07?
Post by: Batt 57 on April 20, 2015, 02:56:38 PM: Pitbull Tactical lists their Bloodline and Bloodline Nocturnal for the P-07.

http://www.pitbulltactical.com/BloodlineNocturnalHolster/

Sent from my iPhone using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: Supercharged1 on April 30, 2015, 11:10:25 AM: Bladetech has an 'IDPA Competition Shooter's Pack' that fits the P-07. I received mine last week and I like it. It includes a holster with both belt and paddle adapters, and a 2-mag holder for the belt, for $90. It took them 2 weeks to ship and another week for UPS ground shipping.

http://shop.blade-tech.com/index.php?cPath=1_130
Title: Re: What holsters fit the P-07?
Post by: barnseeker on April 30, 2015, 05:59:55 PM: alien gear has a good holster for most cz p 07
Title: Re: What holsters fit the P-07?
Post by: Batt 57 on May 08, 2015, 06:07:16 PM: CZ Holster database
http://cz-usa.com/hammer/wp-content/uploads/2014/09/HOLSTER-DATABASE.xlsx

Sent from my iPhone using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: evnash on June 13, 2015, 08:46:35 PM: Made these two today. Aiwb in black and a uspsa rig in carbon fiber using a generic belt mount

(http://i16.photobucket.com/albums/b28/evnash/Guns/CD228BBC-BFAF-4FE4-A0F7-72CCDD4F48E5.jpg) (http://s16.photobucket.com/user/evnash/media/Guns/CD228BBC-BFAF-4FE4-A0F7-72CCDD4F48E5.jpg.html)

(http://i16.photobucket.com/albums/b28/evnash/Guns/321F4ABE-82EE-4E12-B4B1-3ACDBB4FB502.jpg) (http://s16.photobucket.com/user/evnash/media/Guns/321F4ABE-82EE-4E12-B4B1-3ACDBB4FB502.jpg.html)

(http://i16.photobucket.com/albums/b28/evnash/Guns/80730125-105D-4B27-9540-F0BE0CBDD072.jpg) (http://s16.photobucket.com/user/evnash/media/Guns/80730125-105D-4B27-9540-F0BE0CBDD072.jpg.html)

(http://i16.photobucket.com/albums/b28/evnash/Guns/ED49982E-9362-4DE9-99D8-C752FD65ECAC.jpg) (http://s16.photobucket.com/user/evnash/media/Guns/ED49982E-9362-4DE9-99D8-C752FD65ECAC.jpg.html)

(http://i16.photobucket.com/albums/b28/evnash/Guns/AF2D55C2-090F-47DA-9EF4-BBFF8213FD55.jpg) (http://s16.photobucket.com/user/evnash/media/Guns/AF2D55C2-090F-47DA-9EF4-BBFF8213FD55.jpg.html)
Title: Re: What holsters fit the P-07?
Post by: benq on June 23, 2015, 03:33:44 PM: I'm using an owb holster and mag carriers from Dara Holster for IDPA matches. I'd consider them a good value. I've made minor modifications to fit my needs/preference.

http://www.daraholsters.com/
Title: Re: What holsters fit the P-07?
Post by: lyonsgrid on July 09, 2015, 08:11:30 AM: I have tried the Safariland 578 GLS (compact) for the P07. It fits "ok" but is not ideal. It will work for a range/practice OWB holster.
Title: Re: What holsters fit the P-07?
Post by: Joey donuts on July 09, 2015, 06:47:35 PM: Hey all, Need a holster for my p-07, i'm pretty short on cash. Anyone know of a cheap like 20 dollar pancake holster that holds tight to the body? Really don't care who makes it or even if it nylon, just want it to hold secure and tight to body. Or if someone has a used they could sell me that would be great. Thanks in advance.
Title: Re: What holsters fit the P-07?
Post by: Batt 57 on July 09, 2015, 08:35:53 PM: Sticky Holster. $25

Sent from my iPhone using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: Joey donuts on July 10, 2015, 06:59:22 AM: Looking for owb.
Title: Re: What holsters fit the P-07?
Post by: Batt 57 on July 17, 2015, 12:13:14 PM: Quote from: Joey donuts on July 10, 2015, 06:59:22 AM
Looking for owb.
copy that. Maybe something from Uncle Mikes?

Sent from my iPhone using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: oldfrank on July 17, 2015, 12:56:37 PM: Not $20 but not much more:

http://aliengearholsters.com/alien-gear-cloak-slide-owb-holster-outside-the-waistband.html
Title: Re: What holsters fit the P-07?
Post by: eliguzman10 on July 22, 2015, 12:40:28 AM: couldnt find the thread but the cz p07 and the p 07 duty fit the same holster?? thanks in advance.
Title: Re: What holsters fit the P-07?
Post by: joedirt199 on July 22, 2015, 09:19:29 AM: I believe the older p07 has a slightly different slide profile. My 9mm slide will not fit in my fobus evolution holster but my p09 duty does. The old p07 is just a shade tight and gets hung up. Other holster brands may be more forgiving.
Title: Re: What holsters fit the P-07?
Post by: CDKJudoka on September 17, 2015, 07:21:37 PM: Got my Pitbull Tactical holster today. Long wait, but well worth it.

(http://images.tapatalk-cdn.com/15/09/17/e23d2904d8c79bd1629f452e5170a30d.jpg)

(http://images.tapatalk-cdn.com/15/09/17/ed4958838096dedb25a7843dff5aca7f.jpg)

Tapping from the toilet.
Title: Re: What holsters fit the P-07?
Post by: dlblanchard on September 26, 2015, 11:51:15 AM: Has anyone tried the: Belt holster M-type, retention safety or Belt holster S-type CZ 75/P07, retention+forefinger safety from ShopCZ.com? They are for the P07 "DUTY" and mine is a gen 2. I keep testing the suggested holsters and mine does not seem to fit so well. Is there a significant difference in the Gen 1 DUTY and Gen 2? I'm always leery ordering from overseas and have no idea if it will work for me. The best fit I have found in the Blackhawk Serpa for a Springfield XD Sub-Compact but it will not lock in and I am looking for a locking holster for carrying in the field.
Title: Re: What holsters fit the P-07?
Post by: Joey donuts on October 13, 2015, 10:37:55 AM: Anyone know if the Alien Gear OWB holster for the CZ75 P-07 duty fits the second gen? I called and the woman I spoke to could not give me that answer, I don't think she actually understood my question about the slide differences.

Thanks Guys.
Title: Re: What holsters fit the P-07?
Post by: v_dubguy2004 on October 23, 2015, 10:05:07 PM: Yeah it does
Title: Re: What holsters fit the P-07?
Post by: jbremount on January 15, 2016, 12:38:45 PM: Quote from: mmashburn85 on February 26, 2015, 03:23:03 PM
Quote from: copemech on February 24, 2015, 11:40:30 PM
Can you show us just how it works?

Hopefully this will be a helpful demo on the Hogue PowerSpeed holster that I just got:

http://youtu.be/dgaRgpGql5E

It also comes with a belt loop attachment, but I forgot to show that in the video

Thanks, I just got this holster and love it! It locks up tight and is still is a quick draw as the release lever is right there. I also have the taller fiber optic sights and the gun still fits.Some holsters will not fit the taller sights, but this one does. Anyway, this may become my favorite holster.
Title: Re: What holsters fit the P-07?
Post by: eliguzman10 on January 18, 2016, 03:34:00 AM: Quote from: Joey donuts on October 13, 2015, 10:37:55 AM
Anyone know if the Alien Gear OWB holster for the CZ75 P-07 duty fits the second gen? I called and the woman I spoke to could not give me that answer, I don't think she actually understood my question about the slide differences.

Thanks Guys.
I asked them a question about the first gen CZ 75 P-07 duty and I didn't get a definite answer.
Title: Re: What holsters fit the P-07?
Post by: joedirt199 on January 29, 2016, 07:41:15 PM: I have a first gen p07 with .40 and 9mm top ends and the hogue works for it in both configurations. The rubber nubs on the inside of the hlster get a little sticky. Rubbed a dab of oil on them with a q-tip and it seemed to help.
Title: Re: What holsters fit the P-07?
Post by: GordonF237 on June 02, 2016, 02:02:11 AM: Does anyone know if the original Alien Gear IWB holster completely covers the trigger guard of a CZ P07? It looks like the 2.0 and 3.0 versions don't cover the trigger guard completely, but this thread on ar15.com seems to show what I believe is the original IWB holster completely covering the trigger guard of what appears to be a CZ P07 (see post by andywoj from 2-22-15):

https://www.ar15.com/mobile/topic.html?b=5&f=37&t=157793
Title: Re: What holsters fit the P-07?
Post by: BigBL87 on June 30, 2016, 01:08:31 PM: Quote from: eliguzman10 on January 18, 2016, 03:34:00 AM
Quote from: Joey donuts on October 13, 2015, 10:37:55 AM
Anyone know if the Alien Gear OWB holster for the CZ75 P-07 duty fits the second gen? I called and the woman I spoke to could not give me that answer, I don't think she actually understood my question about the slide differences.

Thanks Guys.
I asked them a question about the first gen CZ 75 P-07 duty and I didn't get a definite answer.

I don't have the OWB, but the OWB uses the same shells as the IWB that I have. My P-07 fits fine, and you can fine tune the fit with the different spacers.
Title: Re: What holsters fit the P-07?
Post by: dtownmj on July 05, 2016, 10:13:46 PM: Im having the HARDEST time finding a good holster. I do not want alienware but here is what im looking for:

1) Right handed
2) Leather/Kydex
3) Under $50
4) OWB
5) Not too bulky like the alienware. I want something i can conceal with a tshirt..im not a huge dude

Any recommendations?
Title: Re: What holsters fit the P-07?
Post by: muggia59 on July 06, 2016, 11:32:07 AM: I bought a quick slide leather holster for my Beretta years ago on Amazon. Think I paid about 25$, and I use it for all my CZs now. No retention, and its open bottom.
Title: Re: What holsters fit the P-07?
Post by: DeanH1290 on July 06, 2016, 11:42:21 AM: I ordered a micro tuck from whitehatholsters.com over the weekend. They seem to be a cross of alien gear and crossbreed.

(http://uploads.tapatalk-cdn.com/20160706/1b98f53d74a2194ee7243c14e8e66e21.jpg)
Title: Re: What holsters fit the P-07?
Post by: BigBL87 on July 07, 2016, 03:08:00 AM: Quote from: dtownmj on July 05, 2016, 10:13:46 PM
Im having the HARDEST time finding a good holster. I do not want alienware but here is what im looking for:

1) Right handed
2) Leather/Kydex
3) Under $50
4) OWB
5) Not too bulky like the alienware. I want something i can conceal with a tshirt..im not a huge dude

Any recommendations?

OWB and concealing under a t-shirt is a pretty tall order unless you wear really loose t-shirts. Its possible, don't get me wrong, but its a lot easier with IWB if you have just a t-shirt. Even with the button up shirts I like to wear, I think OWB would be more trouble than its worth.
Title: Re: What holsters fit the P-07?
Post by: wolrabm49 on July 18, 2016, 05:48:18 PM: I have a guy here in Utah that I have custom make holsters for me. He has my p-07 right now and I am having him make a paddle holster in black, with a thumb break for cocked and locked carry, with a suede lining. Can't wait to get it. His price was less than anything I could find, and I couldn't find one exactly like I wanted. Should just have called him first. :)

His name is Tim and his company is "High Desert Leather", he does really good work, I have several of his holsters. He even made me one for my Colt Double Eagle, just try to get a holster for that! This is is web site http://www.highdesertleather.com/
Title: Re: What holsters fit the P-07?
Post by: DeanH1290 on July 20, 2016, 05:48:23 PM: Finally got my holster in from White Hat. First impressions - seems like high quality leather and hardware. The backing is horsehide. Retention is extremely tight. Held just fine in a shake test and when pulling from a draw, it actually comes out of my pants without a belt on. I guess that will be my next purchase. The hardware they use works great, I can't feel it against my body at all. The leather is fairly stiff right now, so I'll wear it around empty at work and at home to break it in some. On to the pics.

(http://uploads.tapatalk-cdn.com/20160720/17de4f51381a1e5eedb59f54e1f48bc4.jpg)
(http://uploads.tapatalk-cdn.com/20160720/e855f130a1200e94952b0ee43afd1622.jpg)
(http://uploads.tapatalk-cdn.com/20160720/2eb62cdf87e1070dcdfe07213e0e3243.jpg)
(http://uploads.tapatalk-cdn.com/20160720/664b2ca932d6c77f0d35b4b579f729a8.jpg)
Title: Re: What holsters fit the P-07?
Post by: Rdg718 on August 17, 2016, 06:23:42 PM: Im Looking for a holster (owb) right hand for cz-p07 with a crisom trace model # 206 green rail attach.
Title: Re: What holsters fit the P-07?
Post by: Sharky on August 26, 2016, 04:07:21 PM: I have a Urban Gray P-07 with the Suppressor Sights and I'm looking for a OWB Kydex Holster, any good Options ??

Sharky
Title: Re: What holsters fit the P-07?
Post by: Meridian on August 26, 2016, 08:33:15 PM: Maybe check out Dara holsters.
www.daraholsters.com
I have an IWB on order for my P-07...haven't seen it yet but have read good reviews, and products look well thought-out.
Enjoy the P-07...great gun!
Title: Re: What holsters fit the P-07?
Post by: DE0827 on September 06, 2016, 08:02:47 PM: Quote from: wolrabm49 on July 18, 2016, 05:48:18 PM
I have a guy here in Utah that I have custom make holsters for me. He has my p-07 right now and I am having him make a paddle holster in black, with a thumb break for cocked and locked carry, with a suede lining. Can't wait to get it. His price was less than anything I could find, and I couldn't find one exactly like I wanted. Should just have called him first. :)

His name is Tim and his company is "High Desert Leather", he does really good work, I have several of his holsters. He even made me one for my Colt Double Eagle, just try to get a holster for that! This is is web site http://www.highdesertleather.com/

What did this holster cost you, and do you have any pics?
Title: Re: What holsters fit the P-07?
Post by: 4Rescue on October 05, 2016, 10:06:05 PM: Look at Black Rhino Concealment, they do the CZ P-07 and nearly any light/laser combo you can think of. I run TLR-3's on everything but most companies seem to only do the spendier, more "tacticool"/popular lights rather then the cost-effective/work-horse models (not all but many) so I was stoked to find BRC and see they offer a TON of options too. While I'd like to see more Cant offered (I like 20-30deg depending on whether it's OWB or IWB and the size of the gun) they do offer multiple extended barrel options and an option for extended height sights too. While it's not my ideal IWB set-up, the holster also ships with both the IWB and OWB loops and I've indeed carried my FS G20 in it several times and it's comfortable (just a little shy on cant for my frame, 5'11 190lbs, and that much grip to hide) plus even in OWB config it's very easy to conceal with just a good coat/jacket (I wear my G20 under my Carhart Chore-coat and you'd never know it was there) or a long enough button-down shirt.

I've yet to order a P-07 holster from them, but my Gen IV G20 has both a threaded and non-threaded ext. barrels (the holster fits both), a TLR-3 and taller sights, aka a fairly specific gun and the BRC holster fits like a glove. It's also a "90/10" mold so the majority of the gun sits outside holster "wings" where the two halves are riveted together and it hugs the body well as an OWB holster as I found by running it through a couple classes that were very heavily built around movement and shooting. For the cost I'm definitely gonna pick one up for the P-07 even if I only ever use it for an OWB carry.

Here's my G20 in the BRC. My apologies for the "Block" content, LOL, but CZ (or anyone else for that matter) has yet to grace me with the 10mm Auto, G20 competitor I've been crying about for several decades so I give credit where credit is due.
(http://i83.photobucket.com/albums/j309/4x4Rescue/Firearms/%20GenIV%20G20%20wTLR3%20Black%20Rhino%20Concealment%20TCSL%20System%20-%20001_zpshnztru44.jpg) (http://s83.photobucket.com/user/4x4Rescue/media/Firearms/%20GenIV%20G20%20wTLR3%20Black%20Rhino%20Concealment%20TCSL%20System%20-%20001_zpshnztru44.jpg.html)

The other option that I've been trying and actually liking is the "Black Arch" (formerly SHTF Gear) holster I picked up on the cheap from Amazon. I tend to like the single clip IWB Holsters and I'm going to probably order the Clinger version here very soon (best clip placement of any I've seen AND a 30deg. cant option, sadly no light but o well) BUT, for a "Hybrid" style, and one that wasn't terribly expensive, it's a really good fit and it allowed me to get my P-07 into a holster very quickly for carry. That it turns out to be a functional holster and one I actually will KEEP, is just a bonus for me (I have a box of wayward holsters in my shop from companies that promised the world and delivered far less). My only real gripe is that, again, I like a lot of forward cant for my CCW/IWB set-ups as it's more comfortable for sitting in the truck and it hides better on my body , and this holster doesn't have a very long "right" wing so when you put the loop up at the top of it's adjustment and then put it on, the front/right-edge of the holster mouth is slightly behind the belt and the top of the slide can rub on the belt leaving the tiniest mark on my slide every night when I take it off. Not a huge deal but some folks don't like even their carry guns to get scratched up... THat said, it allows me to carry a P-07 with only a SLIGHT increase in printing to my XDS-9 3.3!!!! When you hold these guns side by side you think (or at least I thought) "NO WAY, bleep it I REALLY want to carry this thing but... NO WAY is that going to fit" but fit it does and in the B.Arch hybrid holster, while it's certainly THICKER in every dimension, the grip length overall (the only part that really prints on IWB/4-5o'clock carry IMO) is almost identical to the XDS with the "pinky extender" I put on my 7-rnd carry mags (Pierce piece cut down and hand-shaped so it's just the pinky part, not the "lip" as well so it's also a lot more snag free and easier to draw). Oh and the last kinda awesome bit about this holster... It fits all 3 of my G20's, my TP9SA's/SF and of course the P-07 it's designed for, oh and a buddies SIG P320 and 250 also fit in it as well as his XD... THis holster apparently fits nearly everything with a squared off trigger guard... crazy flexibility IMO. Always a good thing.

sorry for the shoddy pics, apparently I'm shaky today AND it is a cell-phone, as much as that's not a real excuse anymore
Here's my P-07 and the Black Arch IWB
(http://i83.photobucket.com/albums/j309/4x4Rescue/Firearms/CZ%20P-07%20-%20Holster%20-%200001_zpsoml0cczk.jpg) (http://s83.photobucket.com/user/4x4Rescue/media/Firearms/CZ%20P-07%20-%20Holster%20-%200001_zpsoml0cczk.jpg.html)

Here you can kinda see how the top of the slide rubs my belt and the mouth of the holster would be below the level of said belt.
(http://i83.photobucket.com/albums/j309/4x4Rescue/Firearms/CZ%20P-07%20-%20Holster%20-%200004_zpsisfsvtun.jpg) (http://s83.photobucket.com/user/4x4Rescue/media/Firearms/CZ%20P-07%20-%20Holster%20-%200004_zpsisfsvtun.jpg.html)

For comparison here's my XDS in it's low-dollar/high-value Kydex "Single Clip":
(http://i83.photobucket.com/albums/j309/4x4Rescue/Firearms/120160107_110356_zpsmzuantv6.jpg) (http://s83.photobucket.com/user/4x4Rescue/media/Firearms/120160107_110356_zpsmzuantv6.jpg.html)

This is my prefered holster type IF it can support the gun. Easy to get on/off, small in size, makes a good holster for my Chest-rig I use for Back-packing as well meaning it's not limited to IWB use, and in general they protect the gun well if done right IMO. All good things. My next buy will be a Clinger Holsters version. I have one of their "No Print Wonder" holsters and, if I'm being honest, it is THE best, most concealable, Hybrid Style holster I've ever used, and in general I'm not hugely wild about the type (I'm using one now but they can be hit/mis with me like many things, the Stealth Gear "Mini IWB" also looks promising, but they seem kinda bulky and like there's a LOT of material between the gun and my body to stick out farther). Clinger's Single-Clip IWB Holster puts the clip over more to the "left" (if looking at the holster like it would be carried, from a 3rd person perspective, where the bend between the slide and the grip, over the trigger-guard which means it lets the guns weight hang straight down and will stay in place more solidly then even the one here for my XDS. Plus they do 30deg Cant which is PERFECT for even a much longer grip. If I decide I like the P-07 in a Hybrid Style, I WILL be getting another "No Print WOnder" version too. Clinger makes really cool stuff IMO and very well priced for the actual functionality and value I feel they give.

As always, YMMV

Cheers'

Blue
Title: Re: What holsters fit the P-07?
Post by: thebeardedgunner on November 22, 2016, 10:16:37 AM: I've been carrying my P-07 AIWB with a GHXST holster. I came across him on ebay a month or so ago. His prices are excellent and had it in the mail next day. The "claw" was added by me and I highly recommend trying it. It completely solved my problem with the grip sticking out/printing.

(http://imgur.com/jJjQCQi.jpeg)
Title: Re: What holsters fit the P-07?
Post by: Jonesn on December 21, 2016, 10:09:13 AM: I ordered one of these for my P07 > https://justholsterit.com/product/rigid-iwb-with-slide-sweat-shield/ < on Monday and it shipped on Tuesday! Not hi dollar but not real cheap either.......$48.00 shipped with the Christmas coupon. Ill do an update on this thread for fitment and wearability after a couple runs with it.

Update!!>> Holster fits like a glove and carries very well and has an adjustable cant clip. Well made and is very rigid and re holstering is quick and easy. Adjustable retention screws as well. I would recommend it to others with a P07.
Title: Re: What holsters fit the P-07?
Post by: flattusmaximus78 on December 27, 2016, 12:55:26 PM: Can anyone recommend a holster for a P09 UG. No more high sights, but I now have a TLR-1 mounted on it, I'd prefer to leave it on there. It is just for moving it around the house, but I carry apendix.
Title: Re: What holsters fit the P-07?
Post by: Jonesn on December 28, 2016, 02:47:56 PM: May have better luck on this thread>>>>>http://www.czfirearms.us/index.php?topic=53622.0<<<<<
Title: Re: What holsters fit the P-07?
Post by: roadrunner1 on December 29, 2016, 09:54:28 PM: I know they're the same size - I really do, but does the 40 cal P07 require any considerations vs the 9mm when it comes to holsters?
Title: Re: What holsters fit the P-07?
Post by: Jonesn on December 31, 2016, 10:13:57 AM: Im not wrong often but I'd say P07-9mm and P07-40cal are the same size. No need for special holster requirements for a 40 compared to a 9.....Stay thirsty my Friends!
Title: Re: What holsters fit the P-07?
Post by: Boriqua on January 04, 2017, 04:24:03 PM: Quote from: thebeardedgunner on November 22, 2016, 10:16:37 AM
I've been carrying my P-07 AIWB with a GHXST holster. I came across him on ebay a month or so ago. His prices are excellent and had it in the mail next day. The "claw" was added by me and I highly recommend trying it. It completely solved my problem with the grip sticking out/printing.

(http://imgur.com/jJjQCQi.jpeg)

I will second the GHXST. Under $40 bucks and I have been using it off and on for about 2 months. I have it set up for 4 oclock and it is nice and comfortable and retention is great.

http://www.ebay.com/usr/ghxst-tac?_trksid=p2047675.l2559
Title: Re: What holsters fit the P-07?
Post by: CZHipster on January 08, 2017, 10:56:51 PM: Standard G Code INCOG. Pretty comfy aside from the threaded cap digging in all day. Not the holsters fault, though. Great on my traditional 07s. Love it. $70.00

(http://uploads.tapatalk-cdn.com/20170109/e3b7cf302ac25baf33696d1a5a3af7be.jpg)
(http://uploads.tapatalk-cdn.com/20170109/b1758c4abfcd7f93e265f790f3e568ee.jpg)

Sent from my Nexus 6P using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: boromokot on January 13, 2017, 11:13:33 PM: so i took a quick peak around and couldn't find what i was looking for. Is anyone out there currently making owb holsters for the p-07 with an xc1?
Title: Re: What holsters fit the P-07?
Post by: 4Rescue on January 21, 2017, 02:10:28 AM: Anyone know of a company that makes a workable "Hybrid" Leather-back/Kydex-shell IWB holster for a P-07 and a Streamlight TLR-3 or XC-1???

So far all I can find is a pair of holsters for either the P-07 and a TLR-4 or a G29 with the TLR-3 (which is actually REALLY close dimensionally even if the slide shape is somewhat different). I have the ability/know-how to make my own kydex so I can re-work one of those but I still hate to spend US$70-100.00+ maybe on a holster I have to then re-shape myself...

Cheers

Blue
Title: Re: What holsters fit the P-07?
Post by: sangre on January 25, 2017, 07:39:06 AM: Quote from: CZHipster on January 08, 2017, 10:56:51 PM
Standard G Code INCOG. Pretty comfy aside from the threaded cap digging in all day. Not the holsters fault, though. Great on my traditional 07s. Love it. $70.00

(http://uploads.tapatalk-cdn.com/20170109/e3b7cf302ac25baf33696d1a5a3af7be.jpg)
(http://uploads.tapatalk-cdn.com/20170109/b1758c4abfcd7f93e265f790f3e568ee.jpg)

Sent from my Nexus 6P using Tapatalk

Which holster is that? For the Sphinx? I see they don't have a P07 listed on their site... thanks in advance for your answer!
Title: Re: What holsters fit the P-07?
Post by: watchngars on April 16, 2017, 09:38:20 PM: Top for a reply on this. I love that holster; had one for my G19. But that was stolen last weekend. Replacing with the P-07 and want the holster. I've emailed the maker twice; no reply.
Title: Re: What holsters fit the P-07?
Post by: CZHipster on April 17, 2017, 06:34:39 AM: Quote from: sangre on January 25, 2017, 07:39:06 AM
Quote from: CZHipster on January 08, 2017, 10:56:51 PM
Standard G Code INCOG. Pretty comfy aside from the threaded cap digging in all day. Not the holsters fault, though. Great on my traditional 07s. Love it. $70.00

(http://uploads.tapatalk-cdn.com/20170109/e3b7cf302ac25baf33696d1a5a3af7be.jpg)
(http://uploads.tapatalk-cdn.com/20170109/b1758c4abfcd7f93e265f790f3e568ee.jpg)

Sent from my Nexus 6P using Tapatalk

Which holster is that? For the Sphinx? I see they don't have a P07 listed on their site... thanks in advance for your answer!
This is actually, correction, a Bravo Concealment ACER DG2, which they do not make any longer. I believe the DOS is the newer version. Sorry for the confusion, I have so dang many holsters I get them mixed up!

Sent from my Nexus 6P using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: watchngars on April 17, 2017, 07:50:02 PM: Really appreciate this. When I go to Bravo, it has you do a gun search. There are no CZ's. Do you recall what gun matches up with the specs?
Title: Re: What holsters fit the P-07?
Post by: CZHipster on April 17, 2017, 09:07:06 PM: Quote from: watchngars on April 17, 2017, 07:50:02 PM
Really appreciate this. When I go to Bravo, it has you do a gun search. There are no CZ's. Do you recall what gun matches up with the specs?
They definitely did have CZs in 2015 when I made the order. I can't say now, but here is the email text from the order...

1x ACER DG2 Holster - FDE (flat dark earth) for $74.99 each
Gun Type: CZ P-07
Sweat Guard: Medium (standard)
Hand: Right Hand
Belt Loops: Belt Clips 1.50"
COMBAT Suede: Panther Suede (black)

Sent from my Nexus 6P using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: watchngars on April 18, 2017, 01:08:22 PM: Awesome, can't thank you enough.
Title: Re: What holsters fit the P-07?
Post by: Willie Cash on April 19, 2017, 03:24:17 PM: I have an Aliengear that works pretty well, but I am anxiously awaiting my new holster from www.3speedholster.com. This one looks awesome!
Title: Re: What holsters fit the P-07?
Post by: mustangman on April 20, 2017, 06:42:39 PM: Just received a Safariland ProFit GLS for my P-07 to wear OWB, rh cross draw.
After adjustment, it seems to work quite well. Went with the sub compact model to get as small a foot print as possible, so the barrel sticks out a hair.
Going to have work on it a bit to get enough reverse cant for my situation, but shouldn't be too big of a problem.
I would think it would also work with a P-09 as long a you don't mind the barrel being uncovered a bit.
Title: Re: What holsters fit the P-07?
Post by: GRU7_Mike on May 18, 2017, 07:10:15 PM: I just bought a PO-7 today and found that the AlienGear 3.0 I have for my SD9VE is a near perfect fit for it.
Title: Re: What holsters fit the P-07?
Post by: GRU7_Mike on May 21, 2017, 06:40:28 PM: Although I have an AlienGear IWB for my PO-7 (just sent an old Bersa shell off to exchange for a PO7 shell.....even though the SD9VE shell works fine) i needed an OWB holster for drawl and shoot course so I bought a FOBUS Evolution paddle holster. For the price it surprised me how good it is.
Title: Re: What holsters fit the P-07?
Post by: Brews_and_Pews on June 17, 2017, 10:57:47 AM: Here's a couple shots of my Alpha Concealment Systems Gryphon IWB for my P07 with Inforce APL Compact.

http://www.alphaconceal.com(https://uploads.tapatalk-cdn.com/20170617/604b5a2880c0e2079d02abd607bcc79f.jpg)(https://uploads.tapatalk-cdn.com/20170617/25e57b3dd33ab9c2a0e632c849ffd51e.jpg)
Title: Re: What holsters fit the P-07?
Post by: sangre on June 19, 2017, 01:55:12 PM: .
Title: Re: What holsters fit the P-07?
Post by: MHSOwner on July 10, 2017, 10:23:28 PM: Extremely happy with my KT Mech.
Title: Re: What holsters fit the P-07?
Post by: DOC 1500 on August 31, 2017, 09:25:47 PM: Quote from: Willie Cash on April 19, 2017, 03:24:17 PM
I have an Aliengear that works pretty well, but I am anxiously awaiting my new holster from www.3speedholster.com. This one looks awesome!
Looks like my mother's girdle, are the front of a Home Depot work pouch. Sorry not a fan, it's a gimmick.
Title: Re: What holsters fit the P-07?
Post by: Mjolnir on September 02, 2017, 10:04:37 AM: JM Custom Kydex makes some of the best Kydex holsters - particularly AIWB.

Sent from my iPhone using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: mic214 on September 04, 2017, 08:36:40 AM: I have the "Gunfighter" rig from KT Mech for my P-07:

(https://s19.postimg.cc/sdws02soz/KT_Mech_3.jpg) (https://postimg.cc/image/dupmynzjz/)

http://www.kt-mech.com/index.html (http://www.kt-mech.com/index.html)
Title: Re: What holsters fit the P-07?
Post by: Voodoo on November 14, 2017, 10:43:30 PM: Anybody know which holster will fit the P-07 with suppressor sights, threaded barrel/comp and TLR-1?
Can't find anything south of $100
Title: Re: What holsters fit the P-07?
Post by: f100owner on November 19, 2017, 02:02:17 AM: Quote from: Voodoo on November 14, 2017, 10:43:30 PM
Anybody know which holster will fit the P-07 with suppressor sights, threaded barrel/comp and TLR-1?
Can't find anything south of $100
Will be awaiting replies to this. Just acquired the p07 with suppressor-ready barrel and tall sights.

Sent from my SAMSUNG-SM-G930A using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: Litshoot on January 06, 2018, 03:54:35 PM: I've heard good things about clearwater tactical. It doesn't list the option but they seem to have customizable options if you call them.
Title: Re: What holsters fit the P-07?
Post by: Rick53 on January 06, 2018, 06:09:40 PM: Quote from: f100owner on November 19, 2017, 02:02:17 AM
Quote from: Voodoo on November 14, 2017, 10:43:30 PM
Anybody know which holster will fit the P-07 with suppressor sights, threaded barrel/comp and TLR-1?
Can't find anything south of $100
Will be awaiting replies to this. Just acquired the p07 with suppressor-ready barrel and tall sights.

Sent from my SAMSUNG-SM-G930A using Tapatalk
(https://i.imgur.com/pkC81p3.jpg?1) Or Holsters made by Kt-mech for P09 will fit 07 Suppressor ready perfect
Title: Re: What holsters fit the P-07?
Post by: f100owner on January 06, 2018, 06:27:42 PM: Quote from: Rick53 on January 06, 2018, 06:09:40 PM
Or Holsters made by Kt-mech for P09 will fit 07 Suppressor ready perfect

Purchased this paddle holster for my P-07. Happy with it.

(https://uploads.tapatalk-cdn.com/20180106/82c50d4bc8ed263ad2ddbc18dd7edd29.jpg)
Title: Re: What holsters fit the P-07?
Post by: Vernonion on January 23, 2018, 10:06:26 PM: (https://imagizer.imageshack.com/v2/150x100q0/922/CZlFqZ.jpg)

Vedder adds a claw!
Title: Re: What holsters fit the P-07?
Post by: Texf6 on January 23, 2018, 11:48:32 PM: Versa Carry. Try the leather line up and then simply bone fit to you firearm.
Title: Re: What holsters fit the P-07?
Post by: NTX_gunner on January 25, 2018, 07:36:38 PM: Try Black Rhino Concealment, they have a lot of great custom kydex holsters for IWB, OWB, and AIWB. They do great work and the lead times are really fast.
https://blackrhinoconcealment.com
Title: Re: What holsters fit the P-07?
Post by: JonProphet on February 12, 2018, 09:59:22 PM: Quote from: Voodoo on November 14, 2017, 10:43:30 PM
Anybody know which holster will fit the P-07 with suppressor sights, threaded barrel/comp and TLR-1?
Can't find anything south of $100

ANR Design has options for the P07 in all configurations. Suppressor sites, thread barrel, flash lights, etc. I didn't like the fact one of them, you are required to source your own RTI part. The other, I didn't like the belt attachment.

I ended up ordering from T. Rex this weekend.

https://www.trex-arms.com/store/light-compatible-raptor/

I'm just hoping that they know that if you have a threaded barrel, you also have the raised sights or its a non-issue. I like the clips a lot better on this one rather than what is offered with AnR Design. I now have to wait 4 weeks for it to be made. I ordered with the nsight tac light. We'll see.

-JD-
Title: Re: What holsters fit the P-07?
Post by: noway on March 21, 2018, 07:34:12 AM: Just picked up a Daltech Force slide and belt in leather for about $80. It's a higher carry than the average kydex, plus it's leather!

https://www.daltechforce.com/collections/clip-holster/products/molded-belt-slide-holster-custom-built-to-your-selected-gun-deep-black

Also picked up a Fobus, but it's actually made for a full size so there's about an inch of extra holster hanging down...
Title: Re: What holsters fit the P-07?
Post by: Iowa_Ross on April 10, 2018, 08:54:54 PM: Should be getting my holster from Kusiak Leather, its not their signature series, but the old fasion, I do have plans to have them make a signature series, its a pretty compact leather holster.

So this leather holster remindes me of a Kydex holster without all the rivits and overlap. I'm really impressed with it. If you're going appendix carry I'd opt for the Extra mag option.
Title: Re: What holsters fit the P-07?
Post by: mic214 on April 21, 2018, 10:47:45 AM: I was just given this JM Custom IWB rig by a member on another board. It came with a belt slide attachment. I swapped that out for the claw style. It is a very well made rig:

(https://s19.postimg.cc/ozdu05mcj/JM_1.jpg) (https://postimg.cc/image/v0bix88yn/)
Title: Re: What holsters fit the P-07?
Post by: DeanH1290 on April 22, 2018, 08:27:12 AM: My new JMCK AIWB Wing Claw 2.0 next to my old Tier 1 Concealed Xiphos with a clip from Amazon. Really enjoying the JMCK in the short time I used it yesterday. I need to play around with the foam wedges and carry positions. It's super comfortable at 12 with the flat pad by itself.

(https://uploads.tapatalk-cdn.com/20180422/9fa63a9f6c57fe350f745f3d9e0b52f2.jpg)

(https://uploads.tapatalk-cdn.com/20180422/4074471d3e17ea0bc9f7deeba845fc08.jpg)

(https://uploads.tapatalk-cdn.com/20180422/ece60c2b20f03dc8d8357453ff8d5d14.jpg)
Title: Re: What holsters fit the P-07?
Post by: Iowa_Ross on May 18, 2018, 11:14:34 AM: Kusaik Leather now has their old fashioned holster available to order for the P-07, love mine, think of it more as a kydex than leather holster as the leather is stiff and has incredible detail in the mold. I have one with the extra mag coming. Owner makes all the holsters himself and is super nice, I've personally talked on the phone with him and chatted with him. His business is growing and so are wait times, I'd love for him.to make the signature series holster for.the P-07 bit development is around $600 cost for him. But I don't know if we could get enough people together to make it. The most comfortable appendix holster I've owned, check it out.

https://kusiakleather.com/collections/kusiak-holsters/products/theoldfashioned-holster

Sent from my Pixel XL using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: Yankchef on June 19, 2018, 09:05:17 PM: Quote from: Voodoo on November 14, 2017, 10:43:30 PM
Anybody know which holster will fit the P-07 with suppressor sights, threaded barrel/comp and TLR-1?
Can't find anything south of $100
The safariland gls 578 wide will fit the threaded barrel and tall sights and a lot of other guns too and it's 40 bucks
Title: Re: What holsters fit the P-07?
Post by: DennisM62 on June 26, 2018, 10:20:06 AM: I am extremely pleased with my LightTuck from vedderholsters.com Make sure to tell them you want the mag release button covered. This is my 3rd lighttuck. (https://imgur.com/gallery/UjpGLoD) I was not happy with the uncovered mag button. Their customer service was great. They gave me a free UPS return label and replaced it quickly with a new one that has it covered. (Just ordered a 4th one for my 2075 RAMI Custom)
https://imgur.com/gallery/UjpGLoD
Title: Re: What holsters fit the P-07?
Post by: flphotog on June 26, 2018, 04:47:49 PM: I've got two for my P-07, a kydex from pantherconcealment.com and a leather snapcake from littlebearcustomholsters.com.
Both of these guys do outstanding work and have never let me down.
Title: Re: What holsters fit the P-07?
Post by: apeaks24 on July 01, 2018, 02:12:42 PM: Quote from: DennisM62 on June 26, 2018, 10:20:06 AM
I am extremely pleased with my LightTuck from vedderholsters.com Make sure to tell them you want the mag release button covered. This is my 3rd lighttuck.
Double that Vedder LightTuck is best holster out there in my opinion

Sent from my Pixel 2 XL using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: PPTP07 on July 08, 2018, 01:44:57 AM: Hi all. I made my own as the offerings were limited.

(https://uploads.tapatalk-cdn.com/20180708/2e3a47dd95f1a2412fd95ffc8f67edae.jpg)
Title: Re: What holsters fit the P-07?
Post by: Yoni on August 10, 2018, 02:08:30 PM: R&R Holsters, which I bought off Amazon link will be below. I bought it because I needed a holster that would allow me to carry my P07 with a Streamlight. It was cheap and I needed it fast, so I ordered it.

SURPRISE

It is the best kydex holster that I own. I have a lot of kydex hosters from big name places that cost double or more than this holster.

But this is the most comfortable kydex holster I own.

I can wear this holster 16 hours a day and never feel it.

Great workman ship also.

https://www.amazon.com/gp/product/B071SH2V45/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Title: Re: What holsters fit the P-07?
Post by: FoidLand on October 03, 2018, 07:14:35 PM: I am extremely happy with my new Paratus 2 from 1441 Gear. Great fit, retention, comfort and concealability. I usually hate kydex holsters, but this one is a keeper. Their are several options for ride height and cant, especially with dual Infinity Loops. Got it in less than 3 weeks, and the price was pretty fair.
Title: Re: What holsters fit the P-07?
Post by: Hammer Time on February 12, 2019, 07:03:04 PM: New Blackpoint Tactical OWB holster for my P-07 + Olight PL-Mini:

(https://imagizer.imageshack.com/v2/800x600q90/921/qz76V3.jpg)

(https://imagizer.imageshack.com/v2/800x600q90/922/bb06Qo.jpg)

and AIWB holster/mag pouch from Muddy River (I ditched the clip for Pull-the-Dot loops):

(https://imagizer.imageshack.com/v2/800x600q90/924/xao2pv.jpg)
Title: Re: What holsters fit the P-07?
Post by: DarrenL on February 15, 2019, 05:41:34 PM: I found a great holster by the name of Mid-Atlantic out of Virginia Beach,Va for 29.99 and free shipping, I ordered one on Sunday and it was in my mailbox Thrusday.
Title: Re: What holsters fit the P-07?
Post by: Hammer Time on February 25, 2019, 11:31:18 AM: Any thoughts on the StealthGear 'Ventcore' holsters for IWB/AIWB? In general, I don't have a high opinion of most hybrid holsters, but this one has my curiosity.
Title: Re: What holsters fit the P-07?
Post by: Due51 on March 14, 2019, 12:35:50 PM: The Galco IWB Kingtuk (KT248B) for the Sig 226/220/228/229, MK6, and Canik TP9SA fits the P07 very nicely. I wear my 229 Legion and now my new P07 at 12 o'clock and it's super comfortable while I'm driving or at my desk.

As an added bonus, I found this holster in the range's bargain bin for 50% off.
Title: Re: What holsters fit the P-07?
Post by: Hammer Time on March 15, 2019, 10:45:11 AM: Bought this AIWB holster off a forum member - made by JM Custom Kydex. It is by far the best AIWB holster I've used - very stable, slim, positive retention (with an audible click) and it does an excellent job of tucking the gun in against my side. I've owned other JMCK holsters and the quality has always been excellent, but this one takes the cake.

(https://imagizer.imageshack.com/v2/800x600q90/921/qmhY6g.jpg)
Title: Re: What holsters fit the P-07?
Post by: OhioGuy78 on April 11, 2019, 05:05:43 PM: Mine is made by JM Custom Kydex. No regrets! They do good work.
Title: Re: What holsters fit the P-07?
Post by: Mjolnir on April 11, 2019, 07:04:52 PM: Quote from: yogev on September 25, 2010, 12:15:23 PM
all the holster from front-line catalog can be orderd for the p07
http://www.front-line.co.il/ (http://www.front-line.co.il/)
THIS!

Sent from my iPhone using Tapatalk
Title: Re: What holsters fit the P-07?
Post by: Yathump on October 20, 2019, 12:58:32 PM: Just spent the cash on a tier1 concealed agis, yes it’s pricey but the comfort is beyond what I expected, concealing in a t-shirt with no issue
Title: Re: What holsters fit the P-07?
Post by: MadDuner on October 20, 2019, 01:10:27 PM: I am very happy with my StealthGear appendix vent core IWB holster. It took awhile to get here, but does exactly what it’s supposed to. Good retention. Comfortable to wear all day, every day. Conceals well, and was adjustable so I could get it to the exact angle I wanted for both comfort and easy draw.

https://stealthgearusa.com/ceska-zbrojovka-p-07-no-accessory-appendix-ventcore-holster/ (https://stealthgearusa.com/ceska-zbrojovka-p-07-no-accessory-appendix-ventcore-holster/)
Title: Re: What holsters fit the P-07?
Post by: palatin on November 10, 2019, 02:59:31 PM: Hi
I just buy a very simple and very well done holster from Amomax. Is a paddle holster and is very close to my body.It have active retention and fits perfect on my P-07 gen2.

https://www.amomax.com/product/cz-airsoft-holster-p07g2/
Title: Re: What holsters fit the P-07?
Post by: pooty on January 03, 2020, 02:49:33 AM: The extended barrel on my P07 forced me to use the Raven Morrigan. Turns out its a decent holster for the price. I like that it's both cant adjustable and ambidextrous without needing extra attachments.

https://rcsgear.com/morrigan-iwb-holster/
Title: Re: What holsters fit the P-07?
Post by: BrandonP on April 15, 2020, 01:41:51 PM: Black Rhino Concealment AIWB holster fits my Suppressor Ready P07...it's decidedly OK...the plastic clip is kinda meh. Bike inner tube prevents the grip from chafing too badly. They were able to wrap the threaded barrel protector as well so that it doesn't rub out the bottom...the holster itself is a nice design just needs a better clip.

(https://i.imgur.com/FxVZt63.jpg)
Title: Re: What holsters fit the P-07?
Post by: joedirt199 on April 15, 2020, 03:58:01 PM: Never liked the clips for inside the waist band. They seem to grab the shirt. Switch it out with a couple of button loops and you may like it better.
Title: Re: What holsters fit the P-07?
Post by: DenStinett on July 03, 2020, 06:28:32 PM: Just received this from Galco:

Galco introduces holsters for the CZ P-07:
Belt holsters including the new Switchback™ and popular hybrid TacSlide™.
Premium IWB designs like the bestselling KingTuk™ Classic and Deluxe, and the new QuickTuk Cloud™ and Paragon™.

Popularly-priced Carry Lite IWBs including the Stow-N-Go™ and Tuck-n-Go 2.0™.

The immensely popular new FasTrax PAC™ waistpack in all three color/material
combinations.

Galco also offers women’s holster handbags, the versatile Underwraps 2.0™ belly band, day planners and ammo carriers for the CZ P-07!

With holsters in every price range and multiple carry methods, Galco can help outfit owners of the CZ P-07 with the highest-quality American-made holsters and accessories. Visit Galco’s website today and see the complete line!

https://www.galcogunleather.com/
Title: Re: What holsters fit the P-07?
Post by: dodahdude on October 15, 2023, 01:12:12 PM: New guy here.

I see a lot of inside and outside the waist band holsters for the CZ 75 P-07. What I'm looking for is a shoulder harness for the same firearm. Does anyone know of any vendors that carry chest or shoulder harnesses? Or maybe a comparison chart that shows what different firearms that may have the same measurements for holsters. Thanks
Title: Re: What holsters fit the P-07?
Post by: SI VIS PACEM PARRABELLUM on October 15, 2023, 02:12:06 PM: Quote from: dodahdude on October 15, 2023, 01:12:12 PM
New guy here.

I see a lot of inside and outside the waist band holsters for the CZ 75 P-07. What I'm looking for is a shoulder harness for the same firearm. Does anyone know of any vendors that carry chest or shoulder harnesses? Or maybe a comparison chart that shows what different firearms that may have the same measurements for holsters. Thanks
All of the custom makers such as Wright Leather Works and High Noon Holsters and so on produce shoulder rigs for the P-07. They are custom made to order. If you want a holster with the proper fit this is the ONLY way to go.
Title: Re: What holsters fit the P-07?
Post by: SI VIS PACEM PARRABELLUM on January 14, 2024, 02:36:10 PM: Quote from: amcline82 on January 14, 2024, 02:03:16 PM
Is there a reputable retailer that sells Safariland for less them directly. And has them for the P 07 in stock.
Nope. You're not likely to find anything for a P-07 "off the rack" You'll need to special order it. There are some out there for the P10 line but that's about it.
Title: Re: What holsters fit the P-07?
Post by: amcline82 on January 25, 2024, 07:29:20 AM: Hogue makes some pretty good level 2. I just got the ARS for my P 07 and it’s really nice. they can be had on Amazon for about half of what they cost on most other sites.

https://www.hogueinc.com/holsters/stage-2-duty-holsters
Title: Re: What holsters fit the P-07?
Post by: tomjbyron on February 26, 2024, 09:55:49 PM: Henry Holsters has a AIWB that is long enough for the P-09. It can be configured with DCC clips or soft loops, and comes cut for RDS. It isn't light compatible, but I prefer the slimmer profile.

https://www.henryholsters.com/product/aiwb-iwb-holster/ (https://www.henryholsters.com/product/aiwb-iwb-holster/)
Title: Re: What holsters fit the P-07?
Post by: Tanners Owner on April 01, 2024, 09:17:47 PM: As I’ve posted previously, I recently acquired a P07 which I am very happy with. I also just recieved a holster for my P10c that I am very pleased with and as such just ordered the same for my P07. I’ll report back on it when I get it, but have strong suspicion it will be a good fit for me and the P07

https://www.ttgunleather.com/product-page/reinforced-convertible-pancake-owb-iwb
Title: Re: What holsters fit the P-07?
Post by: Makman on April 13, 2024, 01:07:45 PM: I used a Tulster Holster for my P-07 but have since went with Vedder Holsters with claw for AIWB: https://www.vedderholsters.com/czp07/
Title: Re: What holsters fit the P-07?
Post by: DarylLicht on April 14, 2024, 12:09:07 AM: Quote from: Makman on April 13, 2024, 01:07:45 PM
I used a Tulster Holster for my P-07 but have since went with Vedder Holsters with claw for AIWB: https://www.vedderholsters.com/czp07/

Their Light Tuck is a great holster too. I don't have any for CZ pistols but have a couple for S&W Shields and have been happy with them.
Title: Re: What holsters fit the P-07?
Post by: Tanners Owner on June 02, 2024, 06:49:30 PM: Quote from: Tanners Owner on April 01, 2024, 09:17:47 PM
As I’ve posted previously, I recently acquired a P07 which I am very happy with. I also just recieved a holster for my P10c that I am very pleased with and as such just ordered the same for my P07. I’ll report back on it when I get it, but have strong suspicion it will be a good fit for me and the P07

https://www.ttgunleather.com/product-page/reinforced-convertible-pancake-owb-iwb

As promised, feedback on my TT gunleather IWB convertible holster. Unlike the one I received for my P10, this holster was exceedingly tight when it arrived. While disappointed, I followed the instructions to put the gun in a plastic bag and leave it holstered.

Within a few days it was right as rain, securing the gun well, but enabling a rapid draw. I am happy with it.
Title: Re: What holsters fit the P-07?
Post by: Dallasdave on June 09, 2024, 03:53:02 PM: I had an owb holster custom made at a gun show from kydex. That works great but it’s not an iwb. Also, I have a Glock 19x that pops in and out of that same holster like it was made for it. Maybe an ounce or two more draw force needed to draw it. Works fine though. Any soft material holster for the 19x should work just fine, imo.
Title: Re: What holsters fit the P-07?
Post by: calypsocoral on June 27, 2024, 09:16:54 PM: I'm not going to read through 19 pages of the thread to see whether or not this has already been mentioned, but We The People Holsters makes P-07 and P-09 Kydex holsters.

I got the P-09 holster and it fits my P-09 in .40S&W!

https://wethepeopleholsters.com/