What holsters fit the P-07?

[boutaswell]

I found that Fobus makes a kydex belt holster like the Comp-Tac and Blade-Tech holsters. It's called the Evolution series.

I have had one of these for my P-07 for the best part of a year now and as holsters go, it's pretty good.  Nothing super special, it does the job.  The only problem I have found with it when trying to carry concealed is the holster does not pull the butt of the gun into the side, it actually makes the butt "tent" your shirt or jacket, that's how far mine sticks out. 

I have been trying for that same year to find another holster, like the Blackhawk Serpa CQC (can't even tell I'm carrying my 1911 with this holster & T-shirt.  With the Fobus, it's like a warning flag for concealment).  I'm going to give a try to the Serpa XD 4in someone mentioned elsewhere.  Hopefully, it fits well and the wear is as good for the P-07 as it is for my 1911.

[chrisp51]

Please let us know if the P0-7 fits the Serpa holster without modification.  I purchased  the Fobus evolution holster and I have the same complaint.

[Bdubbs]

I found that Fobus makes a kydex belt holster like the Comp-Tac and Blade-Tech holsters. It's called the Evolution series.

I have had one of these for my P-07 for the best part of a year now and as holsters go, it's pretty good.  Nothing super special, it does the job.  The only problem I have found with it when trying to carry concealed is the holster does not pull the butt of the gun into the side, it actually makes the butt "tent" your shirt or jacket, that's how far mine sticks out. 

I have been trying for that same year to find another holster, like the Blackhawk Serpa CQC (can't even tell I'm carrying my 1911 with this holster & T-shirt.  With the Fobus, it's like a warning flag for concealment).  I'm going to give a try to the Serpa XD 4in someone mentioned elsewhere.  Hopefully, it fits well and the wear is as good for the P-07 as it is for my 1911.

You will want to get the serpa for a USP compact, not the XD. I read somewhere in this thread that the serpa for the xd doesn't work. I've got a serpa for a USP compact and my P07 fits. It's a bit tight but it works.

[Mastodon]

Personal Security Systems
persecsystems.com
Light Enabled Standard Holster
Lifetime Warranty

First ever kydex holster for me, but wanted to holster w light attachment.  Been all leather/hides before.

It will take me some getting used to.  Carried it today, OWB.  Good retention, had to loosen it up a bit.


Sent from my iPhone using Tapatalk 2

[PopQuiz]

Hi Guys, found this holster: Black Mamba CE Full Cover (P-07) IWB, looks great. Anyone here heard of it or have used it?

[boutaswell]

The holster definitely needs some 'breaking in'.  Pulling the gun out the first few times was a real chore.  After about 2-5 pulls, it's doing it's job.   Nice holster for the money. 

This was the first holster I purchased for my P07 but I found that the holster was set back on the paddle resulting in the butt of the gun having a "protrusion" problem.  In other words, the butt had a serious "tenting" problem.  It does do a good job of retention and has a screw to adjust. 

As was posted elsewhere here(or somewhere), someone had mentioned about the Blackhawk Serpa for the SA XDM.  I got one and the gun fit very well but as a bit, the holster just didn't seem to be near as tight as it was new.  I looked at the holster thinking that I would cut it  open where the retention screw was and remove some material allowing me to draw it tighter.  I looked inside the holster and decided to remove the little plastic "keeper" that rode against the trigger guard.  I was then able to tighten the holster enough that it fit the gun very tightly...tight enough to even produce a solid "thunk" as it slid around and gripped the trigger guard.  It's a home mod that some won't like but it works very well for me and USPSA.

My $.02

[rk5n]

I'm looking at either the Fobus P-07 or the Serpa USP compact holster. Problem is that I have the threaded barrel version with the taller suppressor sights. The front sight measures .316" taller than the slide. Do either of these holsters have enough clearance?

[joefbtg28]

Here is a shot of my Rocky River Leather Holster in Burgundy.  I have liked it once I got it broken in.  Pretty much just use it when I am camping, but it works well.  The leather works dude even made mine slightly taller for the suppressor sites at no additional cost.  Great guy to work with.  I have some better shots taken with my dslr I will post up later.

https://rockyriverleather.com/content/index.php/shop-online/holsters-and-accessories/pancake-bullhide/

[joefbtg28]

I'm looking at either the Fobus P-07 or the Serpa USP compact holster. Problem is that I have the threaded barrel version with the taller suppressor sights. The front sight measures .316" taller than the slide. Do either of these holsters have enough clearance?

Fobus does not fit the taller suppressor sites.  Mine is sitting in a box somewhere until I buy new sites.

[TheStalker]

Bravo Concealment now lists the P07 as an option for all their holsters if you like kydex with light/laser options.

Chris

And they can accommodate suppressor sights.

[Mischievateur]

El Paso Saddlery makes one for the XD9 that fits fairly well. Bought one at a gun show today.

Sent from my GT-N8013 using Tapatalk 2

[t0mmy0175]

Thanks just ordered this today! 

I have a Crimson Trace CMR-203 green laser on mine, what holster would work with this setup?

You will probably have to get one special ordered.  I was looking for an IWB with a Viridian C5L awhile back and not too many mfg had one for the P07 and a laser/light.

A quick check of some of the places I looked at showed the white hat holsters can make one for the P07 with a CT CMR-201.

http://www.whitehatholsters.com/MaxTuck-IWB-Hybrid-Holster-Jet-Black-Horsehide-p/black%20horsehide.htm

Some of the Custom Kydex makers could probably do one, but you would need to check with them.

[billnchristy]

I have an Ozarks Holster Co. IWB for mine.

[Jon_4130]

With not a lot of options for holsters compared to other brands of guns I decided to make my own holster out of kydex. This turned out pretty well conceding this was my first holster. I?m planning on making a few more along with some mag pouches & refining what I?ve done. I took it out to the rang & it worked just fine & had good retention. To my surprise when I put my CZ 75 in it, it fit ok. With the big trigger guard on the P07 the CZ75 slid in & was snug. Well snug enough for the range

[FutureSailor]

Alien Gear makes a IWB holster for the P-07 its pretty comfy with my one day of wearing it.