The Original CZ Forum
CZ PISTOL CLUBS => CZ Polymer Pistols: P10, P-07, P-09 => Topic started by: NWcityguy2 on June 16, 2017, 01:50:38 AM
-
I bought my P-09 last year to move into USPSA Limited / IDPA ESP (and away from SS/CDP). I ended up getting a great deal on it for only $380 with price match at Budsgunshop. I did a video of a local competition to help promote non-weekend matches in my shooting community. I thought some of you might find it interesting as well. Even though I had some mental mistakes, I still managed to finish 7th of 44 overall and 4th of 27 in Limited. In the next three months, I'll be shooting the USPSA New Mexico Sectional, Texas Paper and Iron, and the New Mexico IDPA Championship. I've been trying to get more involved on Youtube, so hopefully I'll make videos for those as well.
https://youtu.be/QYE0h5VEpTE
Adam
-
Nice shooting! Thanks for the video.
-
Awesome man! Can't wait to get back into IDPA! That was my first thought the first time I shot my P-09 was that it would be a great IDPA gun! I shoot it just about as accurately as any of my 1911's except maybe my Dan Wesson VBOB. Wow, where did you find it for $380? That's a steal! Did you do any mods to it before shooting in IDPA? I haven't done anything to mine other than change sights. May send it in to get DA lightened up a little. Thanks for the vid, good run! Got me pumped to get back out there!
-
That looks like a lot of fun and not a difficult match to set up for a Thursday night. Good video, too. I live in Midland but spend some time in Ruidoso, which is Cowboy Action country.
Joe
-
Thanks for the complements. The gun isn't heavily modified, and one of the best things about it is that it doesn't need a trigger job. I'm sure a trigger job could make it better, but it doesn't need one for cocked and locked shooting. Let's see, I clipped a couple links off the main spring, added a magwell and grip tape, and added magazine extensions as well. The only real custom part is an extended safety I made with JB weld and half a washer, which is an idea I got from here. Nobody offering an extended safety is one of the real downsides of the gun, but there are ways around it. The fixed sights were dead on, so I skipped getting a set of adjustable ones. I also added a CGW's steel guide rod and reduced recoil spring. The factory guide rod would actually unscrew itself while shooting, even with blue loctite. I never lost it, but it was annoying and cheap to fix.
I bought it last summer when Buds was selling it in the low $400's, but used their price match feature to get it down to $380. It's in 40 and for some reason they had that one discounted almost $100 compared to 9mm. Then, I just load minor and major PF loads and use the pistol for everything. I've easily got more money in accessories and magazines than I do the pistol.
(http://i36.photobucket.com/albums/e46/Adam_Hymas/IMG_1548a_zpstuocaxq5.jpg)
-
Oh right, exactly! I think you're the only other person I've heard agree with me about the stock trigger being very good right out of the box. I know a lot of people upgrade the trigger before they've even shot it. Sure it can be made even better but other stuff I'd spend the money on first.
Ohhh that's why it was so cheap, it's .40. Lots of people and LE agencies dropping .40 for 9mm. Sounds like a handy safety you made yourself there, yeah I think just about all CZs have a pretty crappy factory safety. Some even actually unusable without having to change your grip on the gun to manipulate it (like the Shadow 2 but at least they provide an extra extended one)
I agree wish there were more aftermarket parts for the P09. I did swap my sights out for fiber optic front/black rear. Wow I'll have to keep an eye on the guide rod, haven't noticed that on mine yet but only have about 200 rds in it. Yeah I definitely can't foresee ever parting with this pistol or my P-07. Man, your video and gun have me pumped to try and get back out there doing IDPA. Have a bad back I'm trying to recover from, but the minute I held that P-09 in my hands I immediately thought IDPA! Shooting it confirmed that. Here's mine, I used the Talon grips on mine, love those things.
(https://uploads.tapatalk-cdn.com/20170616/d199beda053dd1b7d4f3b60a3c8b9ec7.jpg)
-
Awesome man! Can't wait to get back into IDPA! That was my first thought the first time I shot my P-09 was that it would be a great IDPA gun! I shoot it just about as accurately as any of my 1911's except maybe my Dan Wesson VBOB. Wow, where did you find it for $380? That's a steal! Did you do any mods to it before shooting in IDPA? I haven't done anything to mine other than change sights. May send it in to get DA lightened up a little. Thanks for the vid, good run! Got me pumped to get back out there!
Tanner's has had similar pricing on P-09 .40 cal in their GunBroker listings.
-
May send it in to get DA lightened up a little. Thanks for the vid, good run! Got me pumped to get back out there!
Using the videos available why don't you disassemble it and polish it yourself??
I never handled a pistol until a year-and-a-half ago and with these videos I was able to disassemble and reassemble myself it's not a big deal actually very easy.
-
Heck I'm not a gunsmith but I ought to start a business of polishing the internals.
I wonder if I could legally do that if somebody sent me a pistol with no Barrel and no recoil spring, just the frame and slide.
-
May send it in to get DA lightened up a little. Thanks for the vid, good run! Got me pumped to get back out there!
Using the videos available why don't you disassemble it and polish it yourself??
I never handled a pistol until a year-and-a-half ago and with these videos I was able to disassemble and reassemble myself it's not a big deal actually very easy.
Oh yeah I've already had it completely apart and back together again no problem. First thing I did when I got it home like I have always done with my new toys since I was a kid...my toys just cost a lot more now :) the trigger is already smooth throughout the pull, but might want to shorten the pre-travel distance. But then again might not touch it either :)
-
Then why do you need to send it out to have the DA. Lightened? Put in a 15 pound hammer spring and a reduced power firing pin spring you'll be good to go along with the polishing should do it.
Check the pull weight with a trigger gauge, if you have one , if you know what it is ,what is it
-
I shoot my P-07 in competition too. IDPA and our spin off of IDPA GADPA.
Mine is pretty heavily modified. I polished the internals, Short reset kit from CGW and their hammer. Lighter hammer and trigger spring and SS guide rod.
My SA is 3# and my DA is 5.5#. I shoot mine decocked because I can not reliably reach any CZ safety without shifting my grip.
The P-09/P-07 is not bad out of the box and will suit 90% of shooters. After two friends shot mine they went out and bought new ones for $404 online. Trigger is way harder than mine but still very usable.
-
I just moved to NM and I have been looking for local shooting clubs. I'm in Alamogordo (Holloman AFB) so the LC-IDPA isn't too far away!!
-
I've posted here before about using my P09 in last years IDPA matches. It's one of my favorite guns, accurate, superb recoil management, fits my hands well- very ergonomic.
Only change I made was to put a FO front sight on, rest of gun is stock.
Think the P09 is a sleeper amongst the polymer gun class. If I can find a P07 at a good price locally, I just might grab one.
-
I've posted here before about using my P09 in last years IDPA matches. It's one of my favorite guns, accurate, superb recoil management, fits my hands well- very ergonomic.
Only change I made was to put a FO front sight on, rest of gun is stock.
Think the P09 is a sleeper amongst the polymer gun class. If I can find a P07 at a good price locally, I just might grab one.
If you like the PO 9 stock condition.
you don't know what you're missing by not changing the springs and doing the internal polishing. It transforms your $450 decent shooter into a thousand-dollar incredible shooter.
the potential for this gun is far beyond what you've already experienced. JMHO
-
I've posted here before about using my P09 in last years IDPA matches. It's one of my favorite guns, accurate, superb recoil management, fits my hands well- very ergonomic.
Only change I made was to put a FO front sight on, rest of gun is stock.
Think the P09 is a sleeper amongst the polymer gun class. If I can find a P07 at a good price locally, I just might grab one.
If you like the PO 9 stock condition.
you don't know what you're missing by not changing the springs and doing the internal polishing. It transforms your $450 decent shooter into a thousand-dollar incredible shooter.
the potential for this gun is far beyond what you've already experienced. JMHO
I have to tally agree with the "you don't know what you're missing by not changing the springs and doing the internal polishing" comment. In fact don't stop there. You can take it a whole lot further with a CGW short reset kit and a comp. hammer. If you do all that you have a virtual tack driver if you are a good enough shot!
-
NWcityguy2,
That looks like a lot of fun! Is that the Butterfield range? What holster and mag carriers are you using for your P-09?
Mick
-
Appreciate the video! The more pics and videos on this site the better... I just purchased my P-09 suppressor ready handgun last Thursday and shot it today Sunday. I shot 250 rnds. through it with no issues what so ever. The suppressor ready model has a 5" barrel. The gun shot great out of the box. I'm really pleased with it . Gonna get a trigger pull gauge on it and break it in well before spending more cash on mods.
-
Appreciate the video! The more pics and videos on this site the better... I just purchased my P-09 suppressor ready handgun last Thursday and shot it today Sunday. I shot 250 rnds. through it with no issues what so ever. The suppressor ready model has a 5" barrel. The gun shot great out of the box. I'm really pleased with it . Gonna get a trigger pull gauge on it and break it in well before spending more cash on mods.
I'm glad to see the P09 satisfy yet another customer. Respectfully, though, just go ahead and get all the CGW parts for this gone. All you'll be doing is wasting time breaking parts that you'll end up replacing anyhow.
-
I wondered if the suppressor ready longer barrel would make a significant difference.
-
I love my po9 carry it all the time now !!!!
#7.5 DA- #2.5 SA ...Smooooooth
It's a keeper..
-
I've posted here before about using my P09 in last years IDPA matches. It's one of my favorite guns, accurate, superb recoil management, fits my hands well- very ergonomic.
Only change I made was to put a FO front sight on, rest of gun is stock.
Think the P09 is a sleeper amongst the polymer gun class. If I can find a P07 at a good price locally, I just might grab one.
If you like the PO 9 stock condition.
you don't know what you're missing by not changing the springs and doing the internal polishing. It transforms your $450 decent shooter into a thousand-dollar incredible shooter.
the potential for this gun is far beyond what you've already experienced. JMHO
I have to tally agree with the "you don't know what you're missing by not changing the springs and doing the internal polishing" comment. In fact don't stop there. You can take it a whole lot further with a CGW short reset kit and a comp. hammer. If you do all that you have a virtual tack driver if you are a good enough shot!
Oh, I know about David's Cajun magic- he touched my P01 Omega & I love it.