« previous next »
Pages: [1]   Go Down

Author Topic: don't do this with your P10C  (Read 2431 times)

0 Members and 1 Guest are viewing this topic.

Offline ssqman

  • Full Member
  • ***
  • Posts: 328
don't do this with your P10C
« on: March 26, 2018, 12:11:38 PM »
I recently ordered the CGW striker. Nothing was wrong with the factory one, I just did it for the upgrade and to have a spare. So I take the slide off, got the endplate slid off and replaced the striker no problem. Now I'm excited to see if maybe there is a slight improvement on the factory trigger. Not that it wasn't already good. So I put the slide on and rack it. Wow, that was different. Something isn't right. In my excitement I didn't install the barrel and recoil spring before putting the slide back on. Now I had to fool around for a while to get the slide back off. I'm still not sure what I did to get it back off but it was a pain to do. I won't do that twice.
Logged
No, Google is not my friend

Offline Indy_Tim

  • Sr. Member
  • ****
  • Posts: 884
Re: don't do this with your P10C
« Reply #1 on: March 26, 2018, 12:28:57 PM »
That's funny because I did the exact same thing when I replaced my striker with the CGW one. 
Logged

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Re: don't do this with your P10C
« Reply #2 on: March 26, 2018, 12:30:38 PM »
Quote from: ssqman on March 26, 2018, 12:11:38 PM
I recently ordered the CGW striker. Nothing was wrong with the factory one, I just did it for the upgrade and to have a spare. So I take the slide off, got the endplate slid off and replaced the striker no problem. Now I'm excited to see if maybe there is a slight improvement on the factory trigger. Not that it wasn't already good. So I put the slide on and rack it. Wow, that was different. Something isn't right. In my excitement I didn't install the barrel and recoil spring before putting the slide back on. Now I had to fool around for a while to get the slide back off. I'm still not sure what I did to get it back off but it was a pain to do. I won't do that twice.

We all have probably done it at one time or another.  Fun ain't it, LOL
Logged
I remember when "Common Sense" was common.  I must really be old!

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: don't do this with your P10C
« Reply #3 on: March 26, 2018, 04:25:18 PM »
Can't say that I ever have but be assured I never will now that you mentioned it.
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline DWARREN

  • Sr. Member
  • ****
  • Posts: 626
  • Old & Tired
Re: don't do this with your P10C
« Reply #4 on: March 26, 2018, 04:55:10 PM »
Not the first to do something like this. Live and learn!
Logged
"1776" - Part II

Offline kma!

  • Jr. Member
  • **
  • Posts: 42
Re: don't do this with your P10C
« Reply #5 on: March 26, 2018, 08:06:31 PM »
Did it too. :)
Logged

Offline CzechLands

  • Jr. Member
  • **
  • Posts: 31
Re: don't do this with your P10C
« Reply #6 on: March 26, 2018, 09:17:39 PM »
I am part of that special club  :o who did it.
Logged

Offline MetalGravy

  • Full Member
  • ***
  • Posts: 386
Re: don't do this with your P10C
« Reply #7 on: March 26, 2018, 11:31:35 PM »
How did you forget to replace the barrel and recoil spring?  Shouldn't you have noticed the lack of spring tension?
Logged

Offline fflmike

  • Full Member
  • ***
  • Posts: 321
  • Retired but FFL
    • Greenlawn Sports
Re: don't do this with your P10C
« Reply #8 on: March 27, 2018, 02:09:30 AM »
Quote from: MetalGravy on March 26, 2018, 11:31:35 PM
How did you forget to replace the barrel and recoil spring?  Shouldn't you have noticed the lack of spring tension?
Too late by then, lol
Logged
I remember when "Common Sense" was common.  I must really be old!

Offline deadduck357

  • Full Member
  • ***
  • Posts: 262
Re: don't do this with your P10C
« Reply #9 on: March 27, 2018, 06:17:50 PM »
Live and learn. Sht happens.
Logged

Offline armoredman

  • Administrator
  • Hero Member
  • *****
  • Posts: 19931
Re: don't do this with your P10C
« Reply #10 on: March 29, 2018, 03:07:27 AM »
I honestly can say that is one I have never done, out of a long list of oopsies in life. Important safety tip - don't cross the streams/forget the barrel and recoil spring.
« Last Edit: March 31, 2018, 12:52:33 AM by armoredman »
Logged

Offline Grizzlie

  • Full Member
  • ***
  • Posts: 185
Re: don't do this with your P10C
« Reply #11 on: March 30, 2018, 04:03:51 PM »
A friend reassembled my G16 for me without the rod+spring as a joke. Wouldn't rack, so I did a tap-rack with some force.
Not a cool prank to play.
Logged
'...if we chase perfection, we can catch excellence'
Pages: [1]   Go Up
« previous next »