Author Topic: CGW extended firing pin  (Read 1439 times)

0 Members and 1 Guest are viewing this topic.

Offline DamnYankee

  • Full Member
  • ***
  • Posts: 184
CGW extended firing pin
« on: May 30, 2024, 07:10:56 PM »
I was thinking about getting the CGW spring kit for my P01. Is the extended firing pin necessary when installing the 13# hammer spring?
« Last Edit: May 30, 2024, 10:40:16 PM by DamnYankee »

Offline Wobbly

  • Administrator
  • Hero Member
  • *****
  • Posts: 12730
  • Loves the smell of VihtaVuori in the morning !
Re: CGW extended firing pin
« Reply #1 on: May 31, 2024, 05:44:18 AM »
No. There are a lot of variables involved. Install the spring and try it with your ammo. It may not be an issue.

If it's an issue, then install the extended FP.
In God we trust; On 'Starting Load' we rely.

Offline PA USPSA

  • Full Member
  • ***
  • Posts: 128
Re: CGW extended firing pin
« Reply #2 on: May 31, 2024, 08:31:57 PM »
I'm running a 13# hammer spring with the stock firing pin and Rami firing pin spring and have had no FTF.  The stock firing pin should be fine.
2022 Accushadow 2

Offline Hog Driver

  • Jr. Member
  • **
  • Posts: 79
Re: CGW extended firing pin
« Reply #3 on: June 03, 2024, 11:42:04 AM »
Why the Rami firing pin spring?

Sent from my SM-S901U using Tapatalk


Offline PA USPSA

  • Full Member
  • ***
  • Posts: 128
Re: CGW extended firing pin
« Reply #4 on: June 03, 2024, 01:22:33 PM »
The Rami firing pin spring is not as strong as the stock firing pin spring but still gets the job done.
2022 Accushadow 2