10X bushing on TS with threaded barrel

[coolbox]

CZC recently launched threaded barrel for the TS. I have the 10X bushing installed. Will the combo work in the TS?
The oem barrel slides in much easier in the TS slide with the 10X bushing, probably due a better angle as the slide is longer than regular CZ 75s. In fact, I cant tell if a tighter bushing is installed by barrel insertion or removal. Only the groups on the target show the difference.

[Raining_Brass]

In short:
Without modifying the threaded barrel - no, it will not work with the 10X bushing.

[Raining_Brass]

I currently have my SP-01 Tactical UG at CGW and adding the 10X bushing is something I've been struggling to decide on for over a week now.

I want the advantages of the bushing, obviously. But at the same time the modification that needs to be done to the barrel to make it work with the bushing is not exactly aesthetically pleasing.

[coolbox]

In short:
Without modifying the threaded barrel - no, it will not work with the 10X bushing.

Thanks for the feedback. I still feel the TS is slightly different overall. I wpuld love to be corrected. At the same time, I guess very few, almost no one has installed a threaded barrel on a TS yet, let alone a combo with 10X bushing.

[coolbox]

I would like to add here that the threaded barrel for TS/TSO does not fit with the 10X bushing. I have one TS with factory bushing, and the threaded barrel works like a charm in this pistol.
Now, can we modify the 10X bushing itself to accomodate the threaded barrel? What work would be needed to be done?

[Tok36]

I would like to add here that the threaded barrel for TS/TSO does not fit with the 10X bushing. I have one TS with factory bushing, and the threaded barrel works like a charm in this pistol.
Now, can we modify the 10X bushing itself to accomodate the threaded barrel? What work would be needed to be done?

   An interesting question. I assume that you would need to change the angle of the interior cone of the bushing. I am assuming that the Outside Diameter of the threading dose not exceed the barrel O.D. and that this is just a length issue. I am interested to hear the input of other forum member on the subject.

   A question that comes to mind that may precede this is, will this specific pistol benefit from a 10X bushing by a perceptible amount?