TSO Magazine problem

[AXA]

I order CZ 75 TS .40 SW magazine for my CZ TSO 40. This is the newer version of TSO.

I having problem ejecting the CZ 75 TS  magazine.  It won't happen with the TSO magazine that came with the gun.

[tdogg]

I had a similar issue with some TS mags that I purchased (for use on my TSO).  I ended up gently squeezing them in a vise as they were just a hair too wide and were hanging up ever so slightly after hitting the mag button.  You have to figure out where they are hanging up and see if you can alter them as needed.  I've since put thousands of rounds through them without issue.

Cheers,
Toby

[AXA]

Thank you for the reply.
I order 3 magazine in my original purchase. Since I did my post here I tray them all. 2 work and one is giving problem.

[tdogg]

It helps to pull the slide and grips off to inspect the mag in the magwell.  I was able to pinpoint that the magazine was rubbing just at the transition where it tapers down (side to side not front to back).  You could use a marker and mark the top half of the magazine and see where the marker rubs off.

Hope that helps!

Cheers,
Toby

[AXA]

It helps to pull the slide and grips off to inspect the mag in the magwell.  I was able to pinpoint that the magazine was rubbing just at the transition where it tapers down (side to side not front to back).  You could use a marker and mark the top half of the magazine and see where the marker rubs off.

Hope that helps!

Cheers,
Toby

I will try tonight.
Thank you.