« previous next »
Pages: [1]   Go Down

Author Topic: Just picked up the P10c suppressor ready model  (Read 2316 times)

0 Members and 2 Guests are viewing this topic.

Offline Abaddon

  • Newbie
  • *
  • Posts: 9
Just picked up the P10c suppressor ready model
« on: March 02, 2019, 11:19:57 AM »
How do I know if I have an updated version? I plan on going to the range today to put some rounds through it. This is my first CZ and I love it so far.


Sent from my iPhone using Tapatalk
Logged

Offline TNman

  • Full Member
  • ***
  • Posts: 279
Re: Just picked up the P10c suppressor ready model
« Reply #1 on: March 02, 2019, 11:50:10 AM »
The easiest way to tell (IMO) is to push the mag release. If it pops out of the frame then it's the new version. If the mag release is very stiff and the mag only partially ejects, then it's the original model.
Logged
IDPA   |   USPSA  |   NRA

CZ PCR   |   RAMI BD   |   Shadow 2   |   P-10 C   |   CZ 75B Omega   |   CZ 97 BD

Sig P320 Comp. & Full & X-Carry
Sig P226 Legion
Springfield XDS Mod 2 45

Offline Abaddon

  • Newbie
  • *
  • Posts: 9
Re: Just picked up the P10c suppressor ready model
« Reply #2 on: March 02, 2019, 01:07:48 PM »
Quote from: TNman on March 02, 2019, 11:50:10 AM
The easiest way to tell (IMO) is to push the mag release. If it pops out of the frame then it's the new version. If the mag release is very stiff and the mag only partially ejects, then it's the original model.
The mag release is stiff but the mag comes all the way out. What?s the remedy for it, send it to CZ? I bought it from budsgunshop also.


Sent from my iPhone using Tapatalk
Logged

Offline thedude

  • Full Member
  • ***
  • Posts: 483
Re: Just picked up the P10c suppressor ready model
« Reply #3 on: March 02, 2019, 01:37:31 PM »
Look at the backplate on the gun, is there a horizontal cut on the right hand side?

« Last Edit: March 02, 2019, 01:42:19 PM by thedude »
Logged

Offline Abaddon

  • Newbie
  • *
  • Posts: 9
Re: Just picked up the P10c suppressor ready model
« Reply #4 on: March 02, 2019, 02:40:32 PM »
Quote from: thedude on March 02, 2019, 01:37:31 PM
Look at the backplate on the gun, is there a horizontal cut on the right hand side?


Yes it has the notch on the backplate.


Sent from my iPhone using Tapatalk
Logged

Offline Abaddon

  • Newbie
  • *
  • Posts: 9
Re: Just picked up the P10c suppressor ready model
« Reply #5 on: March 02, 2019, 06:31:30 PM »
Just returned from the range and I'm very impressed. I put 200 rounds through it without a single hiccup, and the slide release and mag release both loosened up a bit by the time I finished. I did something that I never do with guns, took it straight out of the box to the range with no cleaning and it performed perfectly. I used a mix of 115gr winchester white box, and 115/124 grain sig hollow points. I have to say I am more accurate with this gun than any of my other handguns. That grip texture of the backstrap is very aggressive might I add, but nothing I can't manage.
Logged

Offline pcc

  • Newbie
  • *
  • Posts: 17
Re: Just picked up the P10c suppressor ready model
« Reply #6 on: March 02, 2019, 06:38:38 PM »
Quote from: Abaddon on March 02, 2019, 06:31:30 PM
Just returned from the range and I'm very impressed. I put 200 rounds through it without a single hiccup, and the slide release and mag release both loosened up a bit by the time I finished. I did something that I never do with guns, took it straight out of the box to the range with no cleaning and it performed perfectly. I used a mix of 115gr winchester white box, and 115/124 grain sig hollow points. I have to say I am more accurate with this gun than any of my other handguns. That grip texture of the backstrap is very aggressive might I add, but nothing I can't manage.

Excellent, I love the grip texture, its perfect. I also shoot this gun better than any handgun I have ever had sans a 226 I had.
I will be purchasing more P10's has they release the models that I am interested in.
Logged

Offline Abaddon

  • Newbie
  • *
  • Posts: 9
Re: Just picked up the P10c suppressor ready model
« Reply #7 on: March 08, 2019, 06:29:58 PM »
Just received my inforce Aplc light. This is my nightstand gun and this light is perfect!


Sent from my iPhone using Tapatalk
Logged

Offline Sango

  • Full Member
  • ***
  • Posts: 385
Re: Just picked up the P10c suppressor ready model
« Reply #8 on: March 08, 2019, 08:26:08 PM »
Gorgeous pistol! A P10c (and F) are on my to do list. Love the FDE

Welcome to the contagion!
Logged
I’ve got a few CZ’s...

Offline Abaddon

  • Newbie
  • *
  • Posts: 9
Re: Just picked up the P10c suppressor ready model
« Reply #9 on: March 08, 2019, 09:51:46 PM »
Quote from: Sango on March 08, 2019, 08:26:08 PM
Gorgeous pistol! A P10c (and F) are on my to do list. Love the FDE

Welcome to the contagion!

Thanks, this is the urban grey though [emoji23]


Sent from my iPhone using Tapatalk
Logged

Hickeroar

  • Guest
Re: Just picked up the P10c suppressor ready model
« Reply #10 on: March 09, 2019, 09:30:43 PM »
FYI, in case it wasn?t clear in that earlier exchange, If you have that little horizontal cut, you?ve got the latest and greatest. They are starting to roll out a non-ambi, reversible mag release version as well which is basically a ?gen3,? but AFAIK that doesn?t include any other updates or changes.
Logged

Offline Abaddon

  • Newbie
  • *
  • Posts: 9
Re: Just picked up the P10c suppressor ready model
« Reply #11 on: March 10, 2019, 02:48:43 PM »
Quote from: Hickeroar on March 09, 2019, 09:30:43 PM
FYI, in case it wasn?t clear in that earlier exchange, If you have that little horizontal cut, you?ve got the latest and greatest. They are starting to roll out a non-ambi, reversible mag release version as well which is basically a ?gen3,? but AFAIK that doesn?t include any other updates or changes.




Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »