« previous next »
Pages: [1]   Go Down

Author Topic: 75585 old style trigger  (Read 2095 times)

0 Members and 4 Guests are viewing this topic.

Offline puddintame

  • Sr. Member
  • ****
  • Posts: 856
75585 old style trigger
« on: June 22, 2019, 01:23:50 PM »
I need to replace my PCR trigger because of "bite" and want to buy this....https://cajungunworks.com/product/75585-85c-old-style-trigger/
is there anything else I need from CGW to make this happen? the pistol is mostly stock atm except for some springs. would like to order asap so my LGS can do the install.
Logged

Offline SoCal

  • Sr. Member
  • ****
  • Posts: 603
Re: 75585 old style trigger
« Reply #1 on: June 22, 2019, 01:30:34 PM »
It is optional but I would add the floating trigger pin and a reduced power trigger return spring.  Just my opinion.
Logged
If I had known how much better being retired is than working I would have done it FIRST.

Offline puddintame

  • Sr. Member
  • ****
  • Posts: 856
Re: 75585 old style trigger
« Reply #2 on: June 22, 2019, 01:33:52 PM »
Quote from: SoCal on June 22, 2019, 01:30:34 PM
It is optional but I would add the floating trigger pin and a reduced power trigger return spring.  Just my opinion.
thanks SoCal. I will ;D
Logged

Offline Sulpgnir

  • Full Member
  • ***
  • Posts: 211
Re: 75585 old style trigger
« Reply #3 on: June 22, 2019, 01:34:05 PM »
Quote from: SoCal on June 22, 2019, 01:30:34 PM
It is optional but I would add the floating trigger pin and a reduced power trigger return spring.  Just my opinion.
What he said :D
Logged

Offline Sulpgnir

  • Full Member
  • ***
  • Posts: 211
Re: 75585 old style trigger
« Reply #4 on: June 22, 2019, 01:46:29 PM »
Quote from: puddintame on June 22, 2019, 01:23:50 PM
...... would like to order asap so my LGS can do the install.
Be sure that your LGS has worked on decocker CZ models before, as it can be tricky to remove the sear cage to free the trigger bar.
Logged

Offline puddintame

  • Sr. Member
  • ****
  • Posts: 856
Re: 75585 old style trigger
« Reply #5 on: June 22, 2019, 01:48:02 PM »
thanks again fells. just finished with checkout. cant wait to get these installed so I can shoot this again.
Logged

Offline viking499

  • Hero Member
  • *****
  • Posts: 4437
Re: 75585 old style trigger
« Reply #6 on: July 06, 2019, 09:52:53 PM »
Quote from: Sulpgnir on June 22, 2019, 01:46:29 PM
Quote from: puddintame on June 22, 2019, 01:23:50 PM
...... would like to order asap so my LGS can do the install.
Be sure that your LGS has worked on decocker CZ models before, as it can be tricky to remove the sear cage to free the trigger bar.

Sear cage does not need to be removed to swap the trigger
Logged

Offline tdogg

  • Hero Member
  • *****
  • Posts: 2700
  • Two Alpha!
Re: 75585 old style trigger
« Reply #7 on: July 08, 2019, 07:51:47 PM »
If it were me, I'd order the CGW slave pin and do the install myself.  You'll learn quite a bit in the process and it's really not that hard.

The floating trigger pin is a must.  If you don't own any punches, get a starter punch too.  Since you'll have it apart (assuming you pull the cage), you can polish the trigger bar to smooth the action.  A small assortment of punches is good to help remove the pin completely once started with the starter punch.

Cheers,
Toby

Logged
This forum rocks!

Offline timmy75

  • Full Member
  • ***
  • Posts: 435
Re: 75585 old style trigger
« Reply #8 on: November 30, 2019, 11:37:45 AM »
hi,

i dont like shadow 2 stock because it feels round (small contact area) to me, not enought contact with finger.
i prefer "thick" trigger because it feels wider in contact with finger, not round.

pictures



i would like to know how "old style" CGW trigger feels..?
Logged
Pages: [1]   Go Up
« previous next »