Author Topic: Cz p10f  (Read 427 times)

0 Members and 1 Guest are viewing this topic.

Offline virgil

  • Newbie
  • *
  • Posts: 12
Cz p10f
« on: July 08, 2019, 10:05:57 AM »
Just curious if anyone else is having this problem.... no matter which magazine I use in my p10f, it will not chamber a round with a full mag..I have to take one round out of the mag and then it will chamber..

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1578
Re: Cz p10f
« Reply #1 on: July 08, 2019, 10:30:42 AM »
 If  everything is brand new, try using 1500 grit sandpaper and sand the feed lips on the mag slightly to remove any burs or rough edges and then polishing the feed lips on the magazine with a dremel. Sometimes with some guns you can't get all the rounds it's supposed to take
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1578
Re: Cz p10f
« Reply #2 on: July 08, 2019, 10:35:47 AM »
Just curious if anyone else is having this problem.... no matter which magazine I use in my p10f, it will not chamber a 
 round with a full mag..I have to take one round out of the mag and then it will chamber..
You're saying that when you put in a magazine when the slide is open when you slingshot the slide closed it will not chamber a round?
 Or are you just saying it's hard to put the magazine in with a full mag when the slide is closed?
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline virgil

  • Newbie
  • *
  • Posts: 12
Re: Cz p10f
« Reply #3 on: July 08, 2019, 10:50:32 AM »
Doc, a mag loaded to full capacity when inserted with slid open will not chamber. Catches on ramp EVERY time.. if I remove one round, there's no problem.  I have a bunch of guns and this is the first time I've encountered this....

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1578
Re: Cz p10f
« Reply #4 on: July 08, 2019, 11:21:54 AM »
Doc, a mag loaded to full capacity when inserted with slid open will not chamber. Catches on ramp EVERY time.. if I remove one round, there's no problem.  I have a bunch of guns and this is the first time I've encountered this....
I would do the magazine feed lips anyway that's what I do and many have recommended it. Also pull out the barrel get out a round oblong felt tip for your Dremel polish the feed ramp and on the outside edge of the chamber.
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline DOC 1500

  • Hero Member
  • *****
  • Posts: 1578
Re: Cz p10f
« Reply #5 on: July 08, 2019, 12:49:10 PM »
Virgil, please post back with your findings and results so others will know.
JOHN 3:16
2 COR.5:17
A Lie is a Lie even if everybody believes it ,
The Truth is the Truth even if nobody believes it !!!

Offline virgil

  • Newbie
  • *
  • Posts: 12
Re: Cz p10f
« Reply #6 on: July 08, 2019, 02:13:53 PM »
Cajun G.W. says to fill mags to full capacity and let sit for a couple weeks..  They say it's a common spring tension issue that should correct itself...

Offline Yankchef

  • Full Member
  • ***
  • Posts: 138
Re: Cz p10f
« Reply #7 on: July 08, 2019, 03:52:39 PM »
Might have something to do with the fact that they use the same spring for the 19 rounders that they do for the 19 rounder with the +2 base pads (21 rounders). I've only ever had used 19 round mags in my P09 and any of the new mags I've bought have been 21's, so I find this interesting

Sent from my H8266 using Tapatalk

Offline aflevine

  • Jr. Member
  • **
  • Posts: 91
Re: Cz p10f
« Reply #8 on: July 11, 2019, 12:26:01 AM »
Might have something to do with the fact that they use the same spring for the 19 rounders that they do for the 19 rounder with the +2 base pads (21 rounders). I've only ever had used 19 round mags in my P09 and any of the new mags I've bought have been 21's, so I find this interesting

Sent from my H8266 using Tapatalk

That would certainly explain it.  Really surprised that QA didn't catch this early.

Offline Kelsw

  • Jr. Member
  • **
  • Posts: 92
Re: Cz p10f
« Reply #9 on: July 13, 2019, 10:25:00 PM »
I don't have P10 F but I know that is very difficult loading 19 rounds into a P-09 which shares a magazine . I would only load them to 18 . With a 2 plus base I could get in 20 .