Author Topic: New Rami BD  (Read 1259 times)

0 Members and 1 Guest are viewing this topic.

Offline Tonopah

  • Newbie
  • *
  • Posts: 13
New Rami BD
« on: November 03, 2019, 12:53:20 AM »
I bought a brand new Rami BD from CZ Custom yesterday.  It was one that they had done work on (https://czcustom.com/cz-rami-2075-bd-custom.html).  The DA and SA pulls are excellent.  Stripped it, cleaned it, lubricated it, and shot it with 115 grain FMJ standard ammo.  Functions flawlessly, including both the 10 round and the 14 round magazines.  I could ring an 8" steel target at 100 yards about 20% of the time (which is to say, occasionally).  Sights are tritrium and I have no complaints as they do show up in the dark reasonably well.

I put about a hundred rounds through it and like it a lot.  I'll put another 100 rounds through it and then see how it does with defensive ammunition.  If all is okay, it will be my carry piece going forward -- or at least in the rotation.  Thank you to the folks at CZ Custom -- nice pistol!
____________________
violence rarely occurs at convenient times and in convenient places

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 3859
Re: New Rami BD
« Reply #1 on: November 03, 2019, 07:03:46 AM »
I bought a brand new Rami BD from CZ Custom yesterday.  It was one that they had done work on (https://czcustom.com/cz-rami-2075-bd-custom.html).  The DA and SA pulls are excellent.  Stripped it, cleaned it, lubricated it, and shot it with 115 grain FMJ standard ammo.  Functions flawlessly, including both the 10 round and the 14 round magazines.  I could ring an 8" steel target at 100 yards about 20% of the time (which is to say, occasionally).  Sights are tritrium and I have no complaints as they do show up in the dark reasonably well.

I put about a hundred rounds through it and like it a lot.  I'll put another 100 rounds through it and then see how it does with defensive ammunition.  If all is okay, it will be my carry piece going forward -- or at least in the rotation.  Thank you to the folks at CZ Custom -- nice pistol!
Congrats on your new BD. I think the Rami is one of those guns that is far better than the sum of its parts. I traded for one because it was just too cheap to pass up, but. . . One trip to the range and I was convinced, it's now my EDC.

Offline Axam86

  • Newbie
  • *
  • Posts: 8
Re: New Rami BD
« Reply #2 on: January 04, 2020, 06:52:53 PM »
Congrats on your rami. I have one with the safety and the bd with the decocker. Both are great but I have a issue with the grips. Screws are tight and upper part of the grips move. Did you notice that with yours?

Offline SteveR2013

  • Full Member
  • ***
  • Posts: 124
Re: New Rami BD
« Reply #3 on: January 04, 2020, 09:24:10 PM »
Both are great but I have a issue with the grips. Screws are tight and upper part of the grips move. Did you notice that with yours?
Have you checked that the grip screw bushings are correctly located as far as depth is concerned? I had to adjust my bushings once when replacing the grips.

Offline Axam86

  • Newbie
  • *
  • Posts: 8
Re: New Rami BD
« Reply #4 on: January 05, 2020, 12:34:09 AM »
Thanks I will check it out

Offline Oldbear

  • Jr. Member
  • **
  • Posts: 66
Re: New Rami BD
« Reply #5 on: January 05, 2020, 03:36:28 PM »
Congrats on the new RAMI- great little pistols.  Accurate, reliable.  Clean it, oil it, and shoot it.   

Offline gunbuster

  • Full Member
  • ***
  • Posts: 117
Re: New Rami BD
« Reply #6 on: January 10, 2020, 04:19:49 PM »
I bought a brand new Rami BD from CZ Custom yesterday.  It was one that they had done work on (https://czcustom.com/cz-rami-2075-bd-custom.html).  The DA and SA pulls are excellent.  Stripped it, cleaned it, lubricated it, and shot it with 115 grain FMJ standard ammo.  Functions flawlessly, including both the 10 round and the 14 round magazines.  I could ring an 8" steel target at 100 yards about 20% of the time (which is to say, occasionally).  Sights are tritrium and I have no complaints as they do show up in the dark reasonably well.

I put about a hundred rounds through it and like it a lot.  I'll put another 100 rounds through it and then see how it does with defensive ammunition.  If all is okay, it will be my carry piece going forward -- or at least in the rotation.  Thank you to the folks at CZ Custom -- nice pistol!

CONGRATULATIONS on getting a CZ custom RAMI BD!  Very nice!  Share some pics.
Wanted:
CZ P-10 S (Optics Ready)
CZ 75 Short rail
CZ 75 Pre-B

Offline Claymore504

  • Full Member
  • ***
  • Posts: 319
Re: New Rami BD
« Reply #7 on: January 18, 2020, 11:03:00 AM »
Both are great but I have a issue with the grips. Screws are tight and upper part of the grips move. Did you notice that with yours?
Have you checked that the grip screw bushings are correctly located as far as depth is concerned? I had to adjust my bushings once when replacing the grips.

Yes, check the bushings. The Rami BD I used to have had a stripped out bushing. The screw would never stop turning, so I could not get the grip off on that side.

 

anything