Does the CZ 75 Kadet Adapter fit RAMI BD 9mm?

[KC Brew]

Hello - I have a P-07 and it's corresponding Kadet kit. Such a great gun and the Kadet kit is a great way to save money.

Recently got the RAMI BD - love it. It is heavy and chunky but it shoots so great for a 3 inch barrel. I'd like to get the Kadet kit if it will fit. I have read conflicting information.

My RAMI BD is new this year if that makes a difference in fitment.

Thanks for any guidance y'all can provide.

[timetofly]

According to the CZ USA website, no.  I attached a link to the source of the information you were asking for.

Good luck.

[DenStinett]

I'm guessing it all depends on which RAMI Frame it is
If the Barrel Lug fits, the Kit can work
Not my Pics, but here it is:

[KC Brew]

Thanks DenStinett - I have a BD model. I've seen these photos as well. That's why I was asking.   Maybe someday I'll find a Kadet kit local and be able to try it on my RAMI BD to see if it fits and cycles correctly. 

Thanks again - the search continues!

I'm guessing it all depends on which RAMI Frame it is
If the Barrel Lug fits, the Kit can work
Not my Pics, but here it is:

[DenStinett]

Not sure, but from what I've read, they fit on the Steel Framed, but NOT on the Poly Framed RAMIs

[Rowca]

I was initially frustrated but once fitted now fits fine. My only issue was several FTF with cheap ammo and one set back: the firing pin stop, along with the firing pin and spring blew flew off while firing, reinforcing the rule to wear protective glasses.  I have since replaced it and will test fire again.  I am trusting it was a one off.


Frustrated.  My Kadet adapter will mount to the Rami BD frame, but the Kadet slide will not actuate (slides 2/10 of an inch).  The decocker works, as the does the trigger when the hammer is back. Double action does not work. I have tried both the original and the Kadet slide stop.

Suggestions welcome.

Note: The Kadet is a shooter's dream on my P01. It does not require the Kadet slide stop.


 

[DenStinett]

Since the KADET isn't really meant to work on the RAMI
Maybe the KADET's Bolt doesn't allow the Disconnector to move correctly
Try sliding the Bolt on independently and see how it fits and functions in the Frame