New to RAMI

[tdogg]

The Rami is an alloy frame CZ and they are 1.1 inch thick.  The standard steel frame CZ75 variants are only 1 inch think.  The the floating trigger pin will be slightly recessed in the Rami frame.  It won't affect the function and will be retained by the trigger return spring the same.

Cheers,
Toby

[Srober40]

The old style trigger solved the finger chew issue. Had a chance to shoot it several days ago and had no issues.

[kimbo90]

Just got a new RAMI.  Took it to the range today and it functioned flawlessly. 200 rounds without any issues.  FMJ and 3 different HP loads. Everything fed,fired, and ejected as it should.

Only negative was a blister/cut on my trigger finger. On the bottom side of my index finger.  Not sure if it was a placement issue or a repeated pinch.  Never experienced this with other pistols.   I have more experience with 1911’s and Sigs.

What brand of ammo were you using? Looking to find a Go To ammo for my new Rami.

[Srober40]

Sorry for the late reply.  On the first range session with the stock trigger Most was freedom munitions 115 bulk reloads.  HP was some old federal hydro shock,  hornady critical duty and some local 124 gr hp. (Triple j)

I did run a magazine that was mixed every round with a different load/bullet style/weight.

I did not try any 147 gr yet.

On my second trip to the range after the trigger change, I fired 250 rounds of bulk 115 gr with no issues.  No FTF or jams.  No finger chew either.

I do have some more HP ammo to try out.  Some sig v crown, some Remington personal defense and some ranger T.  The ranger T is +P.  Need to do some research on the +P first. 

[s004kcg]

Gratz on the purchase, fun gun. 

[3502dav]

Congrats on your Rami


Sent from my iPhone using Tapatalk

[dannyvi]

I also have a Cajunized safety Rami, Beretta PX4 compact with a Langdon upgrades, and an HK P30SK. Rami has the best trigger pull in both DA/SA among the 3. Still, I love shooting all 3 equally. I do also have the.40 Rami with a converted 9mm barrel to .357 Sig. Works fine but shot rarely , kicks quite a bit.

[Srober40]

Well…I just got my second RAMI.  Got one on the secondary market. Unfired with all the parts for the CGW pro package.  Need to get the parts installed.  I wish there was a source for threaded barrels for these.

Thinking of having the frame cerakoted since it will be taken apart for the pro package installation.

Leaning towards the FDE color.  Burnt bronze also looks nice.   Just the frame and not the slide. Going for a two tone look.

Thoughts?