CZC has a few cut slides left, in FDE and Bronze. I think I bought one of the last tungsten slides last month.
They come with all internal parts and their anti-rotation backplate as well as a standard barrel. I believe they take standard P10c uppers (so CZ must sell the slide and barrel to them as parts) and mill them for the optic cut and some lightening pockets. They also mill out the serial numbers on the slide and barrel. You will need to provide your own mounting screws for the plate (m3 x 8-10mm)
The cerakote makes the optic plate a very tight fit. Possibly too tight. And the lands didn't seem to match the height on the ACRO plate from aimpoint I am using (there was some gap).
https://czcustom.com/cz-parts-all/cz-p10-c-parts/cz-p-10c-czub-optic-upper-bronze.html
https://czcustom.com/cz-parts-all/cz-p10-c-parts/cz-p-10c-czub-optic-upper-fde.html
Only problem is that it costs about as much as a new P10, but considering the cost of milling/cutting a slide and you get a spare set of internals, I found it to be worthwhile. (that and most places have a 8 week backorder on milling right now)
I like this, except I’m wondering how much empty space it leaves with various optics. Do you happen to have a picture you could share with us?
Sent from my iPhone using Tapatalk
Here ya go:
It's something like 30-50 thou. I can't get my feeler gauge in there, but I don't think it'll be a problem. You just have to really beat the plate on (tight interference fit)
-edit- unless you meant the gap between the front of the plate and the slide. That would be dependent on the optic and plate combo, but it's the standard CZ optic cut, so google should help you once you've settled on an actual optic footprint.
That would be an attractive offering had they either moved the optic cut forward and milled in a dovetail for a rear sight .
Or...
Milled a dovetail forward of the optic cut.
With the way it is... you either loose the rear sight completely (thus removing the P-10c from consideration as a CCW) or you end up having to ship the slide off for a forward dovetail cut (which negates the whole point of the offering in the first place).
They have another option with a milled glock dovetail in front of the optic. You could also go with a DPP with the rear sight option, or one of the new micro-micro red dots with built in rear sights (shield, romeo 0, a few others I think). You could also look into something like the APEX shim-sight. You'd have to DIY it for your specific optic, but it'd probably work fine if you must have BUIS.