« previous next »
Pages: [1]   Go Down

Author Topic: Can't Remove Trigger  (Read 1247 times)

0 Members and 1 Guest are viewing this topic.

Offline Kraquin

  • Newbie
  • *
  • Posts: 23
Can't Remove Trigger
« on: January 31, 2021, 03:51:15 PM »
Replacing trigger on CZ-75 Compact. Manual Safety

I removed the trigger pin and per the video I'm watching the trigger assembly should lift high enough to remove the trigger retaining pin...... but it won't. It looks like the trigger bar is preventing the assembly from getting high enough. I suspect it is because the hammer is cocked. Is there a way to release the hammer or will I have to reinsert the trigger pin?

Any tips much appreciated.
« Last Edit: January 31, 2021, 04:10:17 PM by Kraquin »
Logged

Offline jurek

  • Hero Member
  • *****
  • Posts: 1555
  • NRA Pistol Instructor, RSO
Re: Can't Remove Trigger
« Reply #1 on: January 31, 2021, 04:01:34 PM »
When you punch the pin out, the trigger return spring should go freely. Then push the trigger up from the trigger bar side and pull it forward from the top. There is nothing that keeps trigger bar.
Logged

Offline Kraquin

  • Newbie
  • *
  • Posts: 23
Re: Can't Remove Trigger
« Reply #2 on: January 31, 2021, 04:13:51 PM »
The hammer wasn't down so I put the pin back in and was able to drop the hammer and provise enough clearance to remove the trigger pin.

thanks
« Last Edit: January 31, 2021, 07:20:53 PM by Kraquin »
Logged

Offline jurek

  • Hero Member
  • *****
  • Posts: 1555
  • NRA Pistol Instructor, RSO
Re: Can't Remove Trigger
« Reply #3 on: February 01, 2021, 12:24:18 PM »
Quote from: Kraquin on January 31, 2021, 04:13:51 PM
The hammer wasn't down so I put the pin back in and was able to drop the hammer and provise enough clearance to remove the trigger pin.

thanks

 :) great !
Logged
Pages: [1]   Go Up
« previous next »