Kadet 2 Newbie joining the ranks

[lakefun42]

Recently purchased a Kadet II from another member.  Don't have it yet but it is on the way.  somewhat of a blind purchase in that I have not really researched the Kadet other than it looks like fun.  My range has a steel plate cowboy range (lead bullets only) where this will find most of its use.

Current stable: (will probably sit on the 75) but would love to use for all of the below. hopefully it will work on the Rami but I have seen folks say it does and does not.

1. Rami with CGW Pro kit by CGW
2. P-06 with CGW Pro kit installed by me with the help of the forum
3. 75b stainless - stock

Any suggestions as to first steps, other than to see which ones it fits best and mechanically works?

thanks

[cntrydawwwg]

As you noted it’s not meant for the Rami, but some have had it fit. Mine will not fit without some filing, and I choose not to. It fits the wife’s P01 perfectly.

    It should work on the P06 and 75B just fine. You will probably need a heavier hammer spring on the P06, IIRC 17 lb is the lightest you want to go for reliable strikes.

[Fuzzy Sights]

Lakefun42,

It is very possible that it will fit both pistols, P06 and 75.  I would try it on both.  Have four of these on various pistols.  Only one is dedicated to a single frame, and I use it for match work.  Think you will be pleasantly surprised how accurate they shoot.

By the way the one issue you may end up with is that the slide stop pin that works on the 75 probably will not work on the P06.  The kit should come with two slide stops one should work with each.

Best wishes.

JW

If you ever tire of the P06 please let me know. I have wanted one for ages.

[DenStinett]

It is very possible that it will fit both pistols, P06 and 75.

Yeah, fit it to both, and don't worry about it if one may need a bit more filing on the Kit's Slide Tabs to get it to fit than the other
Or if it fits looser on one than on the other
And remember; fit does NOT affect accuracy

By the way the one issue you may end up with is that the slide stop pin that works on the 75 probably will not work on the P06.  The kit should come with two slide stops one should work with each.

Or you can (in most cases) use the Stock Slide Stop that came with the Host (9mm) Pistol

[lakefun42]

Received it today.  The Kadet fits on all 3 and mechanically operates as designed on all 3.  Range test will prove that out, including whether I need a heavier spring.  I have the original springs to drop in as needed.  any suggestions for a front fiber optic sight?  Have dawson's on the p-06 and 75 but still waiting for a solve for the Rami. 

thanks everyone.

[Mick-S]

I have the Dawson on mine. Works great.
170" Tall x .100" Wide

https://dawsonprecision.com/cz-kadet-22-fiber-optic-front-sights/

[Dr_Static]

Hey,
That's awesome you took the dive into the Kadet. I bought my Kadet before I had a frame. Found a 75B SA from a forum member in January. Going to P/U the SA on Thursday. Good luck at the range while your dialing in things.

All the best,
Peter

[lakefun42]

finally made to the range with the Rami.  Spent some time at a steel plate cowboy range. Worked flawlessly with the Rami.  My Rami has the CGW pro package  and SRS.  Worked almost as flawlessly with the P-06 with the pro package as well. (just a few soft strikes)   I am amazed with the accuracy after switching from frame to frame with no fitting or adjustments necessary.