Extended slide stop for Rami?

[MeatAxe]

One of my few complaints about the Rami is that the slide stop isn’t quite long enough for me to operate without changing my grip on the gun. I was wondering if anyone here had successfully switched to a longer CZ75 slide stop, say for a compact or full sized CZ pistol, or some other alternative, to get a reliable extended slide stop on their Rami?

Thanks!

[Pcherry1973]

The P-01, PCR, Shadow 2 and RAMI all share the same OEM slide stop, according to CGW...

https://cajungunworks.com/product/08004-p-01-slide-stop/

Sent from my LG-H932 using Tapatalk

[Tok36]

   As Pcherry1973 mentioned above, the CZ P-01 factory slide stop is what you seek. I encountered the same issue with the factory RAMI slide Slide Stop as you. The P-01 Slide Stop is a bit longer as well as significantly easier to get traction on due to the more significant steps. Below is a picture of my RMAI BD with a P-01 Slide Stop installed for reference.

[MeatAxe]

Thank you for that information!^

[Para-bellum]

   As Pcherry1973 mentioned above, the CZ P-01 factory slide stop is what you seek. I encountered the same issue with the factory RAMI slide Slide Stop as you. The P-01 Slide Stop is a bit longer as well as significantly easier to get traction on due to the more significant steps. Below is a picture of my RMAI BD with a P-01 Slide Stop installed for reference.

I run the same slide stop, I also have the extended mag release from Cajun. I have yet to throw that on.