TSO heavier trigger pull

[Johnson618]

Just wondering if it's possible to make the trigger pull heavier? The sub 2lb pull is tough to get use to and with ammo situation I don't have the ability to just go out and shoot a lot. I would feel a little more comfortable with the gun with a heavier pull.

[George16]

Yes, you can. Use two of the Tanfoglio sear springs to replace the stock sear spring.


On the other hand, dry fire it a lot (daily). Then go shoot it once a week and you’ll be use to it in no time.

[Tok36]

   Installing an additional CZ 75 variant Trigger Return Spring is also an option with some aluminum Single Action only Triggers installed.

I would start with George16's option first though.

[coolbox]

CGW makes a hammer for the tactical sports which they claim increases pull weight from 1.5# to 3#. I would give it a try.

https://cajungunworks.com/product/10080-tactical-sport-hammer-kit-copy/

I have done the double sear spring mod, and recall it increases weight by about 1#, good noticeable difference. I had to open up the sear to have enough room to accomodate two sear springs

[Tok36]

^I had not seen this option, neat.

[tdogg]

I've been there and this is what I've landed on:

https://czfirearms.us/index.php?topic=86250.msg645137#msg645137

The CGW hammer is probably the easiest solution albeit the most $$$.

Cheers,
Toby