Author Topic: Just Amazing Work w/ pics  (Read 5201 times)

0 Members and 1 Guest are viewing this topic.

Offline kabong57

  • Full Member
  • ***
  • Posts: 149
Just Amazing Work w/ pics
« on: October 06, 2021, 11:32:50 PM »
My name is Steve and I am addicted.  I appreciate my CZ pistols and decided to step it up a little. Purchased a 
 CZ SP-01 Tactical Decocker from CGW with the Pro installation and milled slide for a 507-C. There is no way to describe what a fine piece of precision machinery this pistol is. As much as I like my PCR, just had to send it off as it deserved the same treatment. Pro kit installed, MeproLight sights and slide milled for direct mount 507-K.
 The pistol is now just as amazing.
https://imgur.com/a/kPNrc0D
https://imgur.com/RRoa01N
https://imgur.com/gUXoluE
https://imgur.com/qwNP1wn
https://imgur.com/hXfF8qm
https://imgur.com/YRs1J3s
https://imgur.com/JX1bVRm
« Last Edit: October 07, 2021, 12:49:05 PM by kabong57 »

Offline Joe L

  • Hero Member
  • *****
  • Posts: 7439
Re: Just Amazing
« Reply #1 on: October 07, 2021, 05:30:11 AM »
Those look great!  Thanks for the photos, as Tok36 would say.
Joe
CZ-75B 9mm and Kadet, 97B"E", two P-09's, P-07, P-10C, P-10F, P-10S, MTR

Offline Dutch70

  • Jr. Member
  • **
  • Posts: 32
Re: Just Amazing Work w/ pics
« Reply #2 on: October 08, 2021, 12:44:15 AM »
Looks good! How long did it take?

Offline Shawdowpatriot

  • Jr. Member
  • **
  • Posts: 26
Re: Just Amazing Work w/ pics
« Reply #3 on: October 13, 2021, 11:47:57 PM »
Looking good !! Nice work

Offline Shawdowpatriot

  • Jr. Member
  • **
  • Posts: 26
Re: Just Amazing Work w/ pics
« Reply #4 on: November 18, 2021, 02:52:24 PM »
They do the best work to CZs imo .. they care about their customers

Offline rocket7191

  • Jr. Member
  • **
  • Posts: 33
Re: Just Amazing Work w/ pics
« Reply #5 on: November 20, 2021, 10:59:48 PM »
 nice, do they direct mill to slide or is there an adapter “plate” to change to different make red dot sights ?

Offline Catfishmoon

  • Full Member
  • ***
  • Posts: 162
Re: Just Amazing Work w/ pics
« Reply #6 on: November 21, 2021, 03:05:35 PM »
Very nice...

Offline kabong57

  • Full Member
  • ***
  • Posts: 149
Re: Just Amazing Work w/ pics
« Reply #7 on: November 22, 2021, 12:33:08 AM »
PCR slide was milled for direct mounting of the 507K-X2. The SP-01 slide is milled for an adapter plate that has a co-witness rear sight included. It has a mounting pattern for the  507C and other RDS's.

Offline larryflew

  • Hero Member
  • *****
  • Posts: 3421
  • Minnesota
Re: Just Amazing Work w/ pics
« Reply #8 on: February 08, 2022, 12:52:46 AM »
One of my SP01 Shadow uppers was milled by them.  Direct mount for Romeo
When did it change from "We the people" to "screw the people"?

, []]]]]]]]]]]\>
        )'_\   (
'            \ *\
'              \ _\


Larry

Minnesota shooter
and CZ fanatic
NRA life since the 70's
USAF 66-70

Why use 911 when it's faster to use 1911 or 9mm?

Offline 1banger

  • Newbie
  • *
  • Posts: 3
Re: Just Amazing Work w/ pics
« Reply #9 on: February 13, 2022, 09:15:45 PM »
Very nice work by CGW. I was thinking of getting the same done to my PCR. With the dot mounted in front of the rear sights, looks like you would need
a custom holster to clear it. What holster are you using for this PCR?

Offline steveja

  • Newbie
  • *
  • Posts: 12
Re: Just Amazing Work w/ pics
« Reply #10 on: February 14, 2022, 05:39:03 AM »
Do you find that the holosun impacts perceived recoil or reciprocation ?  I've considered it for my P-01 but ...I realy enjoy the very low muzzle-flip.

Offline kabong57

  • Full Member
  • ***
  • Posts: 149
Re: Just Amazing Work w/ pics
« Reply #11 on: February 14, 2022, 01:52:46 PM »
Waiting on a  custom built JM4 holster.

https://jm4tactical.com/relic-series-hybrid-iwb-owb-holster/

Have not really noticed any change in recoil at the range. Haven't done many speed drills at this time.