Author Topic: Cz 2075 slide rail slots width?  (Read 508 times)

0 Members and 1 Guest are viewing this topic.

Offline Diocletian

  • Newbie
  • *
  • Posts: 15
Cz 2075 slide rail slots width?
« on: June 23, 2022, 01:47:09 AM »
Hey I was wondering if someone knew or had a cz2075 they could measure the width of the slide in the rail slots?

Like putting a caliper on the back back of the slide in the rail slots I guess what would be the horizontal width measurement.

If you could also give me the measurement of the actual rails thickness as on the independent part of the rail that slides in the slides rail slot/tracks that would be a vertical measurement of the male rail part.

I'm trying to get the right internal rails and the guy said he thinks he has them but asked me for the measurements.

Thanks again everyone.
 


Offline Philipl

  • Full Member
  • ***
  • Posts: 154
Re: Cz 2075 slide rail slots width?
« Reply #1 on: June 23, 2022, 06:36:17 AM »


0.768" and 0.8715" male rail thickness 0.120" width groove 0.1"

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1641
  • Coat of Arms for Uherský Brod
Re: Cz 2075 slide rail slots width?
« Reply #2 on: June 23, 2022, 08:21:11 AM »
I took measurements on my 2017 RAMI 2075 D:

0.76" inner groove width
0.86" outer (male) width
0.09" male rail thickness
0.09" groove width

My micrometer only shows to 100th of an inch.
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D PCR,P01/07/09,P10M/S/C/F, Phantom,SP01 Tactical,Shadow 2 (Blue & Urban Gray), 82/83/85 PreB,97BE,97BD,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol & PSD

Offline Diocletian

  • Newbie
  • *
  • Posts: 15
Re: Cz 2075 slide rail slots width?
« Reply #3 on: June 23, 2022, 07:06:37 PM »


0.768" and 0.8715" male rail thickness 0.120" width groove 0.1"


I took measurements on my 2017 RAMI 2075 D:

0.76" inner groove width
0.86" outer (male) width
0.09" male rail thickness
0.09" groove width

My micrometer only shows to 100th of an inch.



So it's literally the same width of a cz09 or even a witness.. lol

What's the overall slide length and is it basically a chopped cz75 slide?

Can you guys get me few more measurements?

Slide length
Slide length from front of ejection port to nuzzle tip
Frane length from back of slide to front if frame
And length from slide lock hoke to front of frame.


Basically I'm trying to get another thing together out of a pile if different parts lol.. I did it with the 9mm that was easier..

Thanks again guys if I get it together I'll show you.
« Last Edit: June 24, 2022, 12:06:06 AM by Diocletian »

Offline MeatAxe

  • Hero Member
  • *****
  • Posts: 1213
Re: Cz 2075 slide rail slots width?
« Reply #4 on: June 23, 2022, 11:30:57 PM »
So it's literally the same width of a cz09 or even a witness.. lol

What's the overall slide length and is it basically a chopped cz75 slide?

Can you guys get me few more measurements?

Slide length
Slide length from front of ejection port to nuzzle tip
Frane length from back of slide to front if frame
And length from slide lock hoke to front of frame.


Basically I'm trying to get another thing together out of a pile if different parts lol.. I did it with the 9mm that was easier..

Thanks again guys if I get it together I'll show you.


The Rami is basically a chopped CZ 40 / Colt Z 40, which was basically some iteration of the CZ 75 with  “1911-Esque” exterior cosmetics.,

Keep us apprised of your progress — sounds like an interesting project!

Offline Diocletian

  • Newbie
  • *
  • Posts: 15
Re: Cz 2075 slide rail slots width?
« Reply #5 on: June 24, 2022, 12:11:32 AM »
So it's literally the same width of a cz09 or even a witness.. lol

What's the overall slide length and is it basically a chopped cz75 slide?

Can you guys get me few more measurements?

Slide length
Slide length from front of ejection port to nuzzle tip
Frane length from back of slide to front if frame
And length from slide lock hoke to front of frame.


Basically I'm trying to get another thing together out of a pile if different parts lol.. I did it with the 9mm that was easier..

Thanks again guys if I get it together I'll show you.


The Rami is basically a chopped CZ 40 / Colt Z 40, which was basically some iteration of the CZ 75 with  “1911-Esque” exterior cosmetics.,

Keep us apprised of your progress — sounds like an interesting project!

Yeah I think I can make it work based off those 4 measurements just needa figure out some things like how long the slide is from the front end of the ejection port forward and overall slide length, and basically the same thing for the frame the length from rear of the slide (not beaver tail) to the front of the frame and the last measurement would be from the slide stop hole forward to the end of the front of the frame.

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1641
  • Coat of Arms for Uherský Brod
Re: Cz 2075 slide rail slots width?
« Reply #6 on: June 24, 2022, 05:49:11 AM »
Slide length 5.66"
Slide length from front of ejection port to muzzle tip 1.77"
Frame length from back of slide to front of frame 5.47"
And length from slide lock hole to front of frame.  2.61"
« Last Edit: June 24, 2022, 01:28:02 PM by rdcinhou »
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D PCR,P01/07/09,P10M/S/C/F, Phantom,SP01 Tactical,Shadow 2 (Blue & Urban Gray), 82/83/85 PreB,97BE,97BD,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol & PSD

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 4938
Re: Cz 2075 slide rail slots width?
« Reply #7 on: June 24, 2022, 06:22:41 AM »
You can make a CZ75 Compact slide work on a Rami frame, but machining is required. A user here did one years ago, I'll see if I can dig up the thread and post it.

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 4938
Re: Cz 2075 slide rail slots width?
« Reply #8 on: June 24, 2022, 06:31:07 AM »
https://czfirearms.us/index.php?topic=69370.0
Also, my P07 slide will go on my Rami frame no problem, but if I recall correctly, the distance from the rear of the slide to the slide stop hole is different.

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 4938
Re: Cz 2075 slide rail slots width?
« Reply #9 on: June 24, 2022, 07:02:33 AM »
Here is another good thread...
https://czfirearms.us/index.php?topic=73333.0

Offline Diocletian

  • Newbie
  • *
  • Posts: 15
Re: Cz 2075 slide rail slots width?
« Reply #10 on: June 24, 2022, 03:40:48 PM »
https://czfirearms.us/index.php?topic=69370.0
Also, my P07 slide will go on my Rami frame no problem, but if I recall correctly, the distance from the rear of the slide to the slide stop hole is different.

See I that's what I need to figure out.. from the sound of it i could use the regular polymer rails from a cz75 or even a sar arms..

The issue is the frame.. I can get around the frame. But I really need those 4 measurements since I'm using a rami slide on a modified frame I can probably make it work..

What you got me confused with is you said the rear if the slide is a different measurement then the slide stop.. the slide stop is on the frame unless your speaking of the notch..

Basically if someone would be willing to take those 4 measurements for me that would be a good starting area and may be all I need.. I don't see how they'd want to change the rear of the slide that's alot more design work.. doesn't seem needed but they could've went all out on making it small.

Right now where I'm at is possibly uzi g regular full size rails front and back with the rear hammer assembly.. and I'm hopping I can use a rami sear cage on the back of the hammer/rear rail assembly.

And I still need the 2 slide measurements
Full slide tip to butt
Front of ejection port to tip of slide

Rami frame measurements
Rear of frame where hammer slides In to muzzle tip of frame.
Slide stop hole to frobt tip of frame.

Thanks again guys

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 4938
Re: Cz 2075 slide rail slots width?
« Reply #11 on: June 24, 2022, 04:30:52 PM »
How about this...the distance from the rear part of the frame that aligns with the rear of the slide, to the slide stop hole...is different between the Rami and the P07/09.

Offline Diocletian

  • Newbie
  • *
  • Posts: 15
Re: Cz 2075 slide rail slots width?
« Reply #12 on: June 24, 2022, 04:56:17 PM »
How about this...the distance from the rear part of the frame that aligns with the rear of the slide, to the slide stop hole...is different between the Rami and the P07/09.

So the frame position of the slide stop hole is different, how much different is it

I guess what would be another measurement id need rear of the frame from where the slide meets it to the slide stop hole.

I take it you don't have a rami on hand to measure do you?

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 4938
Re: Cz 2075 slide rail slots width?
« Reply #13 on: June 24, 2022, 11:39:11 PM »
How about this...the distance from the rear part of the frame that aligns with the rear of the slide, to the slide stop hole...is different between the Rami and the P07/09.

So the frame position of the slide stop hole is different, how much different is it

I guess what would be another measurement id need rear of the frame from where the slide meets it to the slide stop hole.

I take it you don't have a rami on hand to measure do you?
I will next week.