Author Topic: Cz 83 slide stop spring  (Read 760 times)

0 Members and 1 Guest are viewing this topic.

Offline Hawkeye_90

  • Newbie
  • *
  • Posts: 24
Cz 83 slide stop spring
« on: July 07, 2022, 02:53:25 PM »
Anyone have one they would get rid of? I am unable to repair my 83 withou
T it.

Offline ILpaul

  • Jr. Member
  • **
  • Posts: 46
Re: Cz 83 slide stop spring
« Reply #1 on: July 07, 2022, 04:29:12 PM »
Here is thread on springs.
Directly from from a guy in CZ.
I ordered 2019.

https://czfirearms.us/index.php?topic=107206.msg832334#msg832334

Offline ILpaul

  • Jr. Member
  • **
  • Posts: 46
Re: Cz 83 slide stop spring
« Reply #2 on: July 07, 2022, 05:06:33 PM »
Also found this. It might be helpful.








Offline Hawkeye_90

  • Newbie
  • *
  • Posts: 24
Re: Cz 83 slide stop spring
« Reply #3 on: July 21, 2022, 01:55:47 AM »
This has been a saga. My trigger bar and trigger disconnect spring were worn/dirty. I took the gun to a local smith and they said they would clean and install the trigger kit I ordered to replace the trigger bar and trigger disconnect spring. In the process of reassembly or disassembly the smith broke my slide stop spring. They could not fix it. Gave me a broken gun back. They did however Put the trigger kit in. I then took the gun to another smith after two weeks was able to replicate and put a new slide lock spring in thAt he replicated. Now I think the gun works. What a pain. What is too bad is the smith I first used was recommended by two in shops. When I told the second smith who I used. He replied he didn’t even know that shop had a gun smith. Lesson learned.

Offline bonj

  • Full Member
  • ***
  • Posts: 140
Re: Cz 83 slide stop spring
« Reply #4 on: July 21, 2022, 05:24:08 PM »
I have a few CZ 83 parts I could sell if you are interested.

Offline geen

  • Full Member
  • ***
  • Posts: 250
Re: Cz 83 slide stop spring
« Reply #5 on: July 29, 2022, 07:22:54 PM »
if you take out the slide stop without removing the spring first it shears off a little of the spring and it will not work again as it is too short. aski me how I know. There was a guy that made them I Will look back and see if I can find his info.

his name is Norm Sutton not sure if he still makes them but his email was
NORMSUTTON@AOL.COM

« Last Edit: July 29, 2022, 07:30:21 PM by geen »
"Cry Havoc and Let Slip the Dogs of War"

Offline Hawkeye_90

  • Newbie
  • *
  • Posts: 24
Re: Cz 83 slide stop spring
« Reply #6 on: August 01, 2022, 03:20:18 AM »
I took the gun to a smith to install a new trigger bar, and I am convinced that is what they did. They gave me back a broken gun. I took it to another smith he made a new spring and now the gun works great!

 

anything