Author Topic: Reversing Magazine Release on Shadow 2  (Read 1244 times)

0 Members and 1 Guest are viewing this topic.

Offline randyflycaster

  • Jr. Member
  • **
  • Posts: 50
Reversing Magazine Release on Shadow 2
« on: October 16, 2022, 02:49:14 PM »
Here is a video about reversing the magazine release on a Shadow 1.

https://m.youtube.com/watch?v=q8YIwIuIQUE

Is the procedure the same? On the Shadow 2 the top of the release can be removed by loosening the small screw. Is this necessary to do when reversing the mag release or, in other words, does the magazine come out in one piece?

Not sure which screw they are talking about.
https://forums.brianenos.com/topic/255794-moving-shadow-2-mag-release-to-right-side/

Thanks,
Randy
« Last Edit: October 17, 2022, 09:09:17 AM by randyflycaster »

Offline dolph406

  • Newbie
  • *
  • Posts: 7
Re: Reversing Magazine Release on Shadow 2
« Reply #1 on: October 26, 2022, 03:30:52 PM »
That video is correct. The screw inside the gun that holds down the mag release spring and the trigger bar spring needs to be removed. Then pull up on the mag release spring. Slide out in one piece the mag release. Put it in the other side then put spring down inside release again. Put your springs back on top of each other and tighten screw down. Take careful note of how the springs are oriented under the screw before taking apart and put back the same way. Hope this helps.


Sent from my iPhone using Tapatalk