« previous next »
Pages: [1]   Go Down

Author Topic: Stuck firing pin  (Read 1998 times)

0 Members and 1 Guest are viewing this topic.

Offline Thauglor

  • Jr. Member
  • **
  • Posts: 28
Stuck firing pin
« on: November 04, 2023, 05:22:47 PM »
Got a used green p01 a month or so back, went to try it today and nothing on the primers. Checked it out and the firing pin is stuck, looks like it is jammed on the roll pin, nudges maybe half a millimeter forward and doesn't stick past the slide at all.  This could be why everyone is wary of dry firing these things, I still plan in doing it after I replace the rill pin, ill update here when I do for any firing pin damage

« Last Edit: November 05, 2023, 11:03:13 PM by Thauglor »
Logged

Offline Alcoy

  • Full Member
  • ***
  • Posts: 411
Re: Stuck firing pin
« Reply #1 on: November 04, 2023, 08:35:00 PM »
I replaced the original Firing Pin Retaining Pin on all my CZs and use O rings when dry firing.

I learned about that from reading the link below.

https://czfirearms.us/index.php?topic=104035.0
« Last Edit: November 05, 2023, 01:48:24 PM by Alcoy »
Logged

Offline Tanners Owner

  • Moderator
  • Hero Member
  • *****
  • Posts: 1659
Re: Stuck firing pin
« Reply #2 on: November 05, 2023, 09:34:20 AM »
I also use the o ring to protect the firing pin/ firing pin retaining pin.  It’s simple and cost effective protection
Logged
Like a midget at a urinal, I'll have to keep on my toes

Offline M1A4ME

  • Hero Member
  • *****
  • Posts: 7617
  • I've shot the rest, I now own the best - CZ
Re: Stuck firing pin
« Reply #3 on: November 05, 2023, 07:29:55 PM »
Waiting for the OP's report and pictures.

I've heard of this problem, never had it on any of mine.  Just seen some damage to the roll pin when removed for other work (and replaced with a new one just to make me feel good.)
Logged
I just keep wasting time and money on other brands trying to find/make one shoot like my P07 and P09.  What is wrong with me?

Offline Gunnerdad80

  • Hero Member
  • *****
  • Posts: 2247
Re: Stuck firing pin
« Reply #4 on: November 05, 2023, 07:39:23 PM »
I just don’t understand why CZ switched from a firing pin retaining plate, to a firing pin retaining pin on some of the pistols. That’s one of a few of my hangups with them.
Logged

Offline Thauglor

  • Jr. Member
  • **
  • Posts: 28
Re: Stuck firing pin
« Reply #5 on: November 05, 2023, 09:07:00 PM »
Quote from: Alcoy on November 04, 2023, 08:35:00 PM
I replaced the original Firing Pin Retaining Pin on all my CZs and use O rings when dry firing.

I learned about that from reading the link below.

https://czfirearms.us/index.php?topic=104035.0

I saw that thread while the gun was being shipped over, I wanted a green P-01 and a used one popped up on GunBroker for a pretty good price.  I shot it last weekend with a Kadet 2 kit and it shot fine, but I didn't find the 22kit better than my Ruger mkIV 22/45.  Yesterday I tried it and the FTF happened, I will get a picture in the morning, been a busy weekend

I will get a firing retaining pin ordered from CGW, and maybe lower strength springs.  They are only about 1.25 hours away from me, does anyone know if they have a store front to visit?  Is the 16lb recoil spring standard in these?  Mine is green and is flat
Logged

Offline A.

  • Full Member
  • ***
  • Posts: 120
Re: Stuck firing pin
« Reply #6 on: November 12, 2023, 09:54:54 PM »

Welcome to the club!
That is how the mutilated roll pin look like.



Logged

Offline Thauglor

  • Jr. Member
  • **
  • Posts: 28
Re: Stuck firing pin
« Reply #7 on: November 15, 2023, 08:05:38 AM »
Yes same thing as mine

Got the parts from CGW Saturday and a few minutes later was back to working

Logged
Pages: [1]   Go Up
« previous next »