P-01 Slide Stop different styles?

[john seeley]

Pictured is the original slide stop from my 2020 P-01. I went to buy (links below) a factory spare and it seems the P-01 slide stops don't have that angled protrusion on the front left where it's thicker like mine, unless you just can't see it in the pictures. Are there different generations of factory P-01 slide stops? If so, why did it change? Just looking for a stock replacement. Thx.

CZ USA- https://shop.cz-usa.com/slide-stop-compatible-with-cz-models-p-01-40p-compact-400420008004.html
CZC- https://czcustom.com/cz-p01-slide-stop.html

[john seeley]

Other type of slide stop (random picture I found on the internet) which seems like the one they're selling, or at least pictured? This is an older P-01 - (oblong zero=older vs rounder zero =newer in "P-01") Slide stop style matter? Advantages?

[PioneerGuy]

I ordered and received a P-01 slide stop recently (about 1 month ago) from cz-usa.com.  I received the one that has the angled step just like the one pictured by the op. 

[john seeley]

I ordered and received a P-01 slide stop recently (about 1 month ago) from cz-usa.com.  I received the one that has the angled step just like the one pictured by the op.

Awesome. Thanks. You ordered this this exact one?  SKU# 0420008004
https://shop.cz-usa.com/slide-stop-compatible-with-cz-models-p-01-40p-compact-400420008004.html

[PioneerGuy]

Yes, I ordered SKU#: 0420008004.  It looks exactly like the first picture in this post.  My P-01 is from 2022 and it has the same slide stop.

[john seeley]

Thanks for confirming. Makes me think the slide stops we have are a the newer style and the CZC and CZ-USA product photos were never updated - yet. Thx!

[kabong57]

Curious if the length of the shaft is different also ?   Use be a lot of complaints about the shaft sticking out the right hand side

[john seeley]

Curious if the length of the shaft is different also ?   Use be a lot of complaints about the shaft sticking out the right hand side

Between these 2 styles for the P-01? Not sure. They seem to have the same shaft length. The one in the original post is about flush with the outside of the frame. I know the PCR side stop sticks out some.

Correction: The P-01 slide stop in the OP sticks out by about 1/16" from the side of the frame". Seems like the older style P-01 slide stop is about the same. (PCR sticks out about an 1/8" from the side of the frame)

Helpful tip... I use the bottom of a sharpie to pop the slide stops. They have a small dimple that fits perfect and doesn't slide off.