« previous next »
Pages: [1] 2   Go Down

Author Topic: Fobus holster for CZ 75 SP-01 Shadow  (Read 9619 times)

0 Members and 1 Guest are viewing this topic.

Offline Stealth

  • Newbie
  • *
  • Posts: 11
Fobus holster for CZ 75 SP-01 Shadow
« on: April 22, 2009, 07:49:58 PM »
Hello fellow CZers,

My quest is to locate a Fobus holster for my new SP-01 Shadow.  I'm receiving mixed messages from Fobus Israel and Fobus USA.  I'm seeking the roto paddle version and I'm fairly certain that I need to order the CZ-75 model (Product ID: CZ75RP- from the USA website).  However, Fobus Israel inform me that this version is known as the model 11?  Does anyone know if the two are the same?

Further, and I greatly thank you for your help, which model of double magazine holder made by Fobus suits the SP-01 magazines?  I'm also after this in roto paddle format.

Product IDs would be greatly appreciated, if you know them.

Where I live it's only possible to obtain Fobus products via the web- so I want to be certain that I am ordering correctly.

Thanks again...Richard.
Logged
FIT IN OR *%#? OFF!

Offline ResOps

  • Jr. Member
  • **
  • Posts: 65
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #1 on: April 22, 2009, 08:39:15 PM »
I'm in the same boat -looking for a fobus belt roto for my Shadow. My local gun shop (3 hours away) is supposedly getting some in for stock but I've been waiting 5 weeks so far.
Looking forward to the responses ;)
Logged

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8760
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #2 on: April 23, 2009, 12:41:47 AM »
One of the IPSC Shooters at our Range is using the Fobus HK-1 for the regular P-01 and the Fobus HK-2 Evolution Series Holster for his SP-01.  You might look into those.  I have the Fobus HK-2, but I'm using it for a .45 Witness.  Both of his and mine are just the regular Paddle, not the Roto, but that should not make a difference.

« Last Edit: April 23, 2009, 12:47:32 AM by jwc007 »
Logged
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline SP-01Shadow

  • Newbie
  • *
  • Posts: 1
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #3 on: April 23, 2009, 04:05:53 AM »
I have a holster like that and I use it for my Sp-01 Shadow.
It looks like this.



It's the one for the CZ 75 D COMPACT (CZ 75 P-01) on this website.

http://www.fobus.biz/holsters.asp
« Last Edit: April 23, 2009, 04:16:54 AM by SP-01Shadow »
Logged

Offline Stealth

  • Newbie
  • *
  • Posts: 11
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #4 on: April 23, 2009, 04:36:41 AM »
Thanks for the picture...looks like what I'm after.  It's pretty much impossible to get a CZ holster in Australia, so Fobus is pretty much the only option for roto-paddle holsters.
Logged
FIT IN OR *%#? OFF!

Offline ManDown

  • Jr. Member
  • **
  • Posts: 37
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #5 on: April 24, 2009, 09:02:26 AM »
I would go for a little better type of holster and get the bladetech stingray holster for your sp-01. You can either get the belt attachment or the DOH version. It's of better quality and quick shipping although it will cost just a bit more.
Logged

Offline dairycreek

  • Full Member
  • ***
  • Posts: 62
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #6 on: April 24, 2009, 07:59:52 PM »
Quote
I would go for a little better type of holster and get the bladetech stingray holster for your sp-01. You can either get the belt attachment or the DOH version. It's of better quality and quick shipping although it will cost just a bit more.

I think that this is good advice.  I have a new SP-01 in a paddle holster by Bladetech and can attest that this makes for a very effective carry combo.  Not knocking FOBus cause I just don't know a thing about their products.
Logged

Offline tobin

  • Newbie
  • *
  • Posts: 14
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #7 on: April 24, 2009, 11:27:52 PM »
Quote from: ManDown on April 24, 2009, 09:02:26 AM
I would go for a little better type of holster and get the bladetech stingray holster for your sp-01. You can either get the belt attachment or the DOH version. It's of better quality and quick shipping although it will cost just a bit more.

X2  I don't care for Fobus as I have seen a few that you could not get the gun out of.  I have one like that for a 4" L frame S&W, could not get the gun out once it went in.  I use it with my K frame and it is still tight but it works until I can get a Blade Tech.
Logged

Offline ResOps

  • Jr. Member
  • **
  • Posts: 65
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #8 on: April 25, 2009, 07:09:40 AM »
Exactly which Bladetech holster are guys using???
Bladetech doesn't offer the SP01 as an option in the model listing.. :(
Logged

Offline dairycreek

  • Full Member
  • ***
  • Posts: 62
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #9 on: April 25, 2009, 07:33:03 PM »
Quote
Exactly which Bladetech holster are guys using???

ResOps!

I recently ordered a Bladetech paddle  holster and they do specify the SP-01 as a gun for which this  holster is available..
Logged

Offline gja70

  • Full Member
  • ***
  • Posts: 233
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #10 on: April 25, 2009, 08:54:12 PM »
Quote from: ResOps on April 25, 2009, 07:09:40 AM
Exactly which Bladetech holster are guys using???
Bladetech doesn't offer the SP01 as an option in the model listing.. :(
I ordered this and it works great!  Comes with the mag holder too.  http://www.blade-tech.com/Bobby-McGee-Pro-Series-IDPA-PAK-pr-1093.html#product_images


The holster can be used directly with a belt thru the loops, or you can change the attachment and use is as a paddle holster.
Logged

Offline ResOps

  • Jr. Member
  • **
  • Posts: 65
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #11 on: April 26, 2009, 07:24:52 AM »
I stand corrected- wasn't in the list when I last looked a while back > Tx :)
Logged

Offline badge38

  • Hero Member
  • *****
  • Posts: 863
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #12 on: May 05, 2009, 11:40:42 AM »
 I checked the Fobus website for the CZ 75d, and the holster looks good,  they just don't have a price listing.
Logged
Sig Sauer 225, Equinox 220
Ed Brown  Massad Ayoob 1911
S&W M&P 9c, 642 Airweight

Offline Canuck44

  • Hero Member
  • *****
  • Posts: 1496
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #13 on: May 05, 2009, 11:47:18 AM »
I would stronghly recomend Blade Tec.  I use one for IDPA and have had great results with it.  Very well made and their prices are right.  They have a Bobby McGee special on right now which is what I bought.  Worth a look.  I believe Blade Tec has a somewhat better reputation than Fobus.  You should be able to order them on line from Australia.  If you have a problem getting them out of the US their are Canadian retaliers you can order them from.

Take Care

Bob
Logged
Je Suis Charlie

Offline mountaincoulee

  • Full Member
  • ***
  • Posts: 123
Re: Fobus holster for CZ 75 SP-01 Shadow
« Reply #14 on: May 05, 2009, 01:45:17 PM »
A friend ordered a Fobus for his Shadow but was not happy with it in an IPSC environment.
He borrowed my Blade-Tech DOH (dropped offset) and was very pleased with retention and the easy draw.
Logged
Pages: [1] 2   Go Up
« previous next »