Author Topic: What holsters fit the RAMI  (Read 250659 times)

0 Members and 1 Guest are viewing this topic.

Offline PappaWheelie

  • Full Member
  • ***
  • Posts: 225
  • "This is war, and in war, time is of the essence."
    • The Children's Bread
Re: What holsters fit the RAMI
« Reply #120 on: October 18, 2018, 02:45:59 PM »
I carry 12:00 IWB with total tucked-shirt concealment with a Crossbreed SuperTuck tweaked to lower all but the hammer and the butt of the extended grip below the belt line.  In a pinch Clinger's Atom works as well, albeit with more belt sag and less pressure-distributing comfort.  Re. comfort, the lower contour of the SuperTuck's leather got trimmed, generally V-shaped, to enable fully comfortable sitting, bending over, etc.  Both holsters are fully RAMI-specific.
Here's a link to Invisible 15 Round RAMI: http://www.czfirearms.us/index.php?topic=81829.msg600234#msg600234
Updated posts document the use of taller Kydex FoxX hybrid holster as starting point; I'm now alternating between two clip spacing versions because the symmetrical 12:00 positioning means either fitting between or straddling two belt loops.

Also of possible interest: http://www.czfirearms.us/index.php?topic=96929.msg746657#msg746657 Punching Above Weight
https://czfirearms.us/index.php?topic=99762.msg769614#msg769614 Ontological Certitude
https://czfirearms.us/index.php?topic=94266.msg721599;topicseen#msg721599 CGW 1485-T2 Disconnector Installation in CZ 2075 RAMI BD
Member, Gun Owners of America
CC: CZ 2075 RAMI BD in PappaWheelie Invisible 15 Round RAMI Holster
Homeboy: CZ 97 BD, Underwood 45 Super 120 Grain Xtreme Defender ammo
UBG: CZ 75 SP-01 Tactical Urban Grey Suppressor-ready
-all w/ CGW Short Reset Kit/1485-T2 Disco, 5 "Thick" Trigger, polished SA tooth

Offline theoldmusicman

  • Jr. Member
  • **
  • Posts: 88
  • SGT US Army Infantry Vietnam 67-69
Re: What holsters fit the RAMI
« Reply #121 on: April 21, 2019, 10:22:22 PM »
I'm old school, I like leather pancake OWB holsters.  DeSantis makes good leather holsters but a little bit on the expensive side IMO.  Azula also makes good leather holsters and belts at reasonable prices.  My current favorite is Winthrop.  Really nice leather holsters and belts at very good prices.  Never had any problems with any of the three and service is good. 

Offline Perseus

  • Jr. Member
  • **
  • Posts: 39
Re: What holsters fit the RAMI
« Reply #122 on: May 10, 2019, 10:21:44 AM »
Alien Gear has them and a two Holster deal available as well
CZ 75 SP 01 Shadow
CZ 75 SP 01
CZ 2075 RAMI

Offline theoldmusicman

  • Jr. Member
  • **
  • Posts: 88
  • SGT US Army Infantry Vietnam 67-69
Re: What holsters fit the RAMI
« Reply #123 on: May 11, 2019, 02:41:31 PM »
Alien Gear has them and a two Holster deal available as well

I wish Alien Gear would add the Rami to their ShapeShift package.  All of my pistols are included except the Rami.  I did email them and their reply was that they are adding more pistols to the shapeshift all the time but did not know if the rami would be one of them.  The poor Rami just doesn't get the love and respect it deserves, except by those of us who own one.

Offline delcrossv

  • Newbie
  • *
  • Posts: 6
Re: What holsters fit the RAMI
« Reply #124 on: May 15, 2019, 04:42:04 PM »
Recently picked up a Rami BD for one of my daughters, any recommendations for a belly band for when  a IWB won't work?

Offline mecenas

  • Full Member
  • ***
  • Posts: 147
Re: What holsters fit the RAMI
« Reply #125 on: May 21, 2019, 06:50:15 AM »
I very much doubt you will be satisfied with just one holster, until your tried them all - that is IWB, AIWB, OWB, leather, kydex, combination leather/kydex, belly bands, ankle (a bit heavy for that), etc. etc.
By now, almost all of these types are available on the market.
I have two I finally settled on : AIWB Kydex by Dara,  IWB tuckable leather by the unknown maker sold on eBay. The latter one has a leather tab on the outside that is long enough to allow for a deeper concealment and Urban Carry (captain) for a really deep concealment.

Offline SteveR2013

  • Full Member
  • ***
  • Posts: 147
Re: What holsters fit the RAMI
« Reply #126 on: May 22, 2019, 10:44:20 PM »
For IWB I use a Ryan Grizzle SSR. It is adjustable for cant and concealment depth. Also have one for my Sig P938. The workmanship is superb. https://rgrizzleleather.com/index.html

Offline redhawkone

  • Jr. Member
  • **
  • Posts: 25
Re: What holsters fit the RAMI
« Reply #127 on: May 25, 2019, 06:03:37 PM »
For what its worth,just picked up a Rami bd .Gambled on a Mitch Rosen Express IWB for a Sig 224 for $32.00 and it fits great.

Offline Big1

  • Newbie
  • *
  • Posts: 14
Re: What holsters fit the RAMI
« Reply #128 on: June 17, 2019, 03:45:02 AM »
I'm getting ready to pick mines up do you have any pics?

Offline redhawkone

  • Jr. Member
  • **
  • Posts: 25
Re: What holsters fit the RAMI
« Reply #129 on: June 17, 2019, 09:36:38 AM »
I am not gifted in the pic dept.  Mitch Rosen express on ebay

Offline GBUS

  • Full Member
  • ***
  • Posts: 333
Re: What holsters fit the RAMI
« Reply #130 on: June 28, 2019, 10:06:17 PM »
Milt Sparks VM-2 for Glock G26.


$49 Winthrop


Also use an inexpensive HighNoon Holsters Mister Softy for a HK VP9.


Offline Big1

  • Newbie
  • *
  • Posts: 14
Re: What holsters fit the RAMI
« Reply #131 on: July 07, 2019, 12:06:32 AM »
My 2075 Rami in my Vedder Light Tuck holster I have one coming for my new CZ 75 D PCR Compact. Well, I haven't figure out how to post pics yet. I figure it out. https://imgur.com/cvSPslN
« Last Edit: July 07, 2019, 12:11:10 AM by Big1 »

Offline Big1

  • Newbie
  • *
  • Posts: 14
Re: What holsters fit the RAMI
« Reply #132 on: July 07, 2019, 12:12:12 AM »
« Last Edit: July 07, 2019, 12:28:20 AM by Big1 »

Offline theoldmusicman

  • Jr. Member
  • **
  • Posts: 88
  • SGT US Army Infantry Vietnam 67-69
Re: What holsters fit the RAMI
« Reply #133 on: October 16, 2019, 03:26:10 AM »
Vedder LightDraw OWB or LightTuck IWB/AIWB

Offline mecenas

  • Full Member
  • ***
  • Posts: 147
Re: What holsters fit the RAMI
« Reply #134 on: October 16, 2019, 01:43:51 PM »
I noticed a few forum members suggesting Vedder IWB/AIWB holster for a RAMI. This holster has a clip positioned at the thickest part of the gun (except for the grip, of course) while there are several holsters of a similar design with a clip positioned just below the slide - what makes the set-up no wider than the slide portion of the holster. I think there is a big difference in concealability.