What holsters fit the Shadow/Phantom/SP-01?

[armoredman]

Very nice, sir.

[sembambam]

newbie here just joined forum tonight thought i would check out the cz-sp01 forum just ordered my new gun today and was having trouble finding a quality competition holster.learned alot reading the posts and i was wondering why the heck dosen't blackhawk get the lead out so i shot them an e-mail to see if the beretta 92 holster would work for the SP-01 let ya know if i hear back from them.

[Zero4x4]

http://shop.cz-usa.com/P-11213/Tactical-Leg-Retention-Holster-Phantom.aspx

Took some time but this is the only holster I have found for the Phantom that has the Serpa style press release at the trigger guard.

On a side note...

Also be weary about the Falco holsters. I ended up ordering the leather one and it came as a holster for the regular SP-01. Needless to say it was a pain re-boning this to kind of fit the Phantom, but i wasn't about to send it back to Slovakia and wait another month for them to figure this out. To me the holster looks pretty nice and actually the leather seems to be of good quality. After using it for about a month or two every day it fits really good other than its about half a inch too long and getting the thumb break button snap reaching far enough to come together. After a few months the leather formed enough that the snap reached so it wasn't a huge problem for me but if you want something that is going to be perfect out of the box I would recommend something custom, for leather anyway. This may have just been a mistake but I kind of felt like they just added the Phantom to they're list of compatible SP01 holsters, because i emailed them multiple times before buying it to confirm that it would fit.

[armoredman]

I have been trying to get a Falco to review.

[sembambam]

blackhawk not much...basicaly what is listed is what fits...... did find a fobus roto holster gonna give that a try

[Zero4x4]

Your search is over my friends!

So, I really got into this today and sent CZ USA a detailed email about what i needed and they replied with this...


Christian we have those available you would have to order by calling 1-800-955-4486 ext 335 our part number is 11211.  Thanks <--------------- CZ response

 

From: Christian Wamsley [mailto:wamsley4x4@hotmail.com]
Sent: Tuesday, February 15, 2011 1:45 AM
To: webstore
Subject: CZ Phantom Holster

I would like to know if there is a holster similar to the tactical leg retention holster (11213) but that is worn on a belt instead. I have seen the exact type of holster that I am describing on the czub.cz site catalog but when I look for it to buy on their site store it is not seen. These models include
CZ 75 SP-01 PHANTOM

5125-0412 Duty holster with belt attachment
5125-0416 Duty holster with lowered belt attachment
5125-0433 Duty thigh holster

And are shown here with a picture, in the lower right hand section of models, of the CZ SP 01 Phantom in the holster I described http://www.czub.cz/en/catalog/87-accessories/AC-HO/5125-0301.aspx

If you have any information on how I could purchase this specific holster it would be much appreciated.

Thank You for your time.

[1096369fred]

Hey Guys,

Just for info. I had a safariland 6004 for a Beretta 92fs.... and being a somewhat handy fellow...... thought what the hell... I'll give it a try, mod'ing it to fit my tactical, and phantom. I had a burns-o-matic Mapp gas tourch... and a couple of wood blocks, a glock 17 "rubber duck" training gun. First off I would say not to use Mapp gas.... use propane, Ect. Mapp gas is too hot, (It is what I had.... and works... but you have to be careful not to overheat!). I just went slowly warming the Kydex from the top down... heating a fairly small area,... and mostly just bending it out with my fingers..... I didn't really need the wood blocks or "rubber duck"  to move the kydex, it moves easily and quickly when warm... and stays put when cool.  The hardest part was the bottom end of the holster, where it flares in around the beretta's muzzle.... it was a bit tricky.... But I went slowly and it worked great! This was an easy project!

I would think that with all the beretta holsters coming back from "the sandbox", these would make very good, low cost, Tac holsters for our beloved CZ's! I will post pic's later today! It may not be the prettiest holster on the range.... but will get 'er done.... I will likely
duracoat mine, on my next nice day off!

Fred

[CZ-in-OK]

Hello to all...

I am located in Oklahoma and am in the midst of working with Blade-Tech and Looper Leathers on making there Hybrid Holster (top quality leather with Kydex inner liner) in a Duty rig with the Level III retention for the SP-01.  I was checking the interest level of anyone else for a leather/kydex holster molded for the SP-01 not only in a duty model, but in OWB/IWB/any other config you would like. I will most likely be providing them with one of my SP-01 pistols for them to make a mold of to be able to vacuum form a hybrid holster when ever one is ordered.  Also any other models of CZ that you all would prefer..(P-07, P-06, 75 compact etc.) Feel free to message me directly or reply to this post and I will update with the results of progress.

Thank you,
Ryan Shaw

[armoredman]

Very nice, glad to hear that! If I can get my Dept to authorize my Phantom, that will be a carry pistola.

[rburch20]

Hello to all...

I am located in Oklahoma and am in the midst of working with Blade-Tech and Looper Leathers on making there Hybrid Holster (top quality leather with Kydex inner liner) in a Duty rig with the Level III retention for the SP-01.  I was checking the interest level of anyone else for a leather/kydex holster molded for the SP-01 not only in a duty model, but in OWB/IWB/any other config you would like. I will most likely be providing them with one of my SP-01 pistols for them to make a mold of to be able to vacuum form a hybrid holster when ever one is ordered.  Also any other models of CZ that you all would prefer..(P-07, P-06, 75 compact etc.) Feel free to message me directly or reply to this post and I will update with the results of progress.

Thank you,
Ryan Shaw

I'd be interested, really thinking of the Phantom as a duty gun for security work.

[armoredman]

High Noon will have Phantom models in about a month.

[sparks701]

High Noon will have Phantom models in about a month.

keep us posted if you hear anything, I usually get an email from them when new stuff comes out but just in case I miss something. I sent them a request for the Phantom about 2 months ago and got a response saying if there was enough interst they would make them. So good job to all those others who asked about them also.

[armoredman]

We had to go an extra mile or two, but HN is worth the wait.

[Dissonant]

Picked up a Galco made for a Glock 21 last night.  It's got a pretty nice fit to it.

[CZ-in-OK]

Just a quick update... They are in the process (about 2 weeks along) of making gun molds of my SP-01 tac with and with out a TLR-1s light so holsters should be available in the very near future.