Comparison with my CZ P-01....Well, I finally got the GP back from the babysitter and decided to snap a few pics next to my P-01. I won't be able to do an actual range comparison for another few weeks, so I've been dry firing both of them quite a bit, SA and DA. The trigger on the Grand Power is still tops, but especially in DA, where it is noticeably a much lighter, smoother pull. So without a doubt my CZ's will eventually be getting some love from CGW, as the P-01and '14 P-07 are still my #1 & 2 choices for carry. 'Nuff said!
I've listed the trigger measurements from the starting point at rest, then when all slack is taken out of the trigger and you actually start hitting resistance, when the hammer is released, and how far out the reset is.
Also, I measured these from the centerpoint on the rear of the trigger, to the rear most inside of trigger guard (subject to correction). When possible, I will get the pull weights measured and list those asap.
P-01 (and my 2014 P-07):SA Start: 10mm
SA Take up: 4mm
BANG: 2mm
Reset: 6mm
DA Start: 17mm
DA Take up: 15mm
DA ? Cock: 12mm
BANG: 2mm
Grand Power P1 Mk7:SA Start: 3mm
SA Take up: 1mm
BANG: 0mm
Reset: 2mm
DA Start: 13mm
DA Take up: 11mm
DA ? Cock: 8mm
BANG: 0mm
Now for the customary pictures. CZ on left, Grand Power on right.
Here's a combo shot of the GP slide and frame, showing the rails and lugs for the rotating barrel.
