cz 82 trigger problems, any help would be great

[nhelements]

so I have come into the realm of cz....and loving it so far...I picked up a cz 82 not to long ago, typical 82 condition. before going to the range I just was running through the handgun to see if all seemed ready when I noticed that when in double action at times I could pull the trigger with nothing happening no hammer movement, it will do this a couple pulls then all is good then it will do it again, single action seems to work just fine, the trigger seems to be loose and sloppy. maybe a misplaced spring, broken, not really sure, any help would be great.
Thks, Eric

[Lemming]

I am afraid I can't really help you much - but you may want to take off the grips and check all the pins you can see to make sure nothing has moved out of place.

For example,  there is a pin that holds the trigger guard in place (if I remember correctly) that has moved out of position on my CZ83 from time to time. When this happens I also get strange trigger problems.

[nhelements]

well I found out what the problem is, it helps if there is a trigger spring, seems that there is no trigger spring at all, at least its a cheap easy fix, so if anyone else seems to have the same problem, I hope this helps.