CZ 452/452se Stock Boyds

[JSC_Liason_Neo]

Welcome from Australia
Im soon to get a CZ 452 American (Its called "Special" here)
What are difference in the stocks? I would like to replace it with a Boyds Ss Evolution. Will it work?
 
Its a 452 E ZKM receiver

Boyds dont make the Evolution for the 452 but they do for the 452 2e

[Bodene]

Sorry I can't answer your questions, but welcome to the forum from Virginia. - Bodene

[Rimfire7]

Do not know either..... but welcome as well.

[painter]

Welcome.

It will fit if yours is 22LR with a tapered barrel. All of Boyds stocks are based on the 'American' action with 2 action screws. If you had a Lux or Trainer it wouldn't be a drop in. 

[JSC_Liason_Neo]

i was able to get this from Boyds

 I only have the dimensions for the 452 2E.
Barrel Dimensions: Point A = 099" and Point B = .78855"
(Point A- Where your barrel meets your receiver. Point B- 9" down from A and you measure across.)
Center to Center of Action Screws: 6.6"

haven't been enable to find details of the 452 e

[JSC_Liason_Neo]

got this for one of my local shops

Usually these stocks will fit, though sometime they require a little bit of
inletting to get a good fit. They no longer have the barrel screw in them,
but often the stock has allowances for this.

[painter]

got this for one of my local shops

Usually these stocks will fit, though sometime they require a little bit of
inletting to get a good fit. They no longer have the barrel screw in them,
but often the stock has allowances for this.

That's fine because no CZ 452 American action uses a barrel screw.