Drill Bit for Welded Trigger Pack - Pay it Forward

[Spearjunkie]

This is a great thread and glad I was able to help out by donating a bit to help everyone out.  Let's keep it going so no one has to wait to fix the trigger pack. Great job by everyone so far!

[theanomaly20]

Got impatient and drilled out without it. My weld wasn't too bad though so it was easy work 2 minutes or so and I've got a new trigger!

Group waiting for the bit down to:

CrzyMac
KS_Dan

[CrzyMac]

I sent The_Tonka my info.  I'll drill mine out as soon as I receive the bit.

[05k20z1]

Well I tried these so called Titanium bits (Maybe its coated) and nothing happened for 15 minutes with only a small dip on the puddle of the weld. I've noticed the nut inside the trigger pack moves, guessing y'all used a very skinny vice grip? oh and I'll put my name on the list....  =/

KS_Dan
05k20z1

[rogueshot]

Ok, I m finished and ready to ship the bit.

Who is up? KS-Dan? If so PM me you name and address please. I can ship today or tomorrow.

thx
Sean

[Dhenry360]

Well I tried these so called Titanium bits (Maybe its coated) and nothing happened for 15 minutes with only a small dip on the puddle of the weld. I've noticed the nut inside the trigger pack moves, guessing y'all used a very skinny vice grip? oh and I'll put my name on the list....  =/

KS_Dan
05k20z1

There is no nut in the trigger pack, just the welded on collar. Drill through it until it pops off the screw and you should be good to go; no vice grips required.

[05k20z1]

Well I tried these so called Titanium bits (Maybe its coated) and nothing happened for 15 minutes with only a small dip on the puddle of the weld. I've noticed the nut inside the trigger pack moves, guessing y'all used a very skinny vice grip? oh and I'll put my name on the list....  =/

KS_Dan
05k20z1

There is no nut in the trigger pack, just the welded on collar. Drill through it until it pops off the screw and you should be good to go; no vice grips required.

Gotcha yea the collar spins with the screw when I tried to see if I could break the weld if I did it hard enough. But I stopped before I could strip something. I'll just wait for the bit lol


Sent from my iPhone using Tapatalk

[Suppressed]

Okay, I got the bits today and got that fool collar drilled out.

I think I got the bits that originated with Spearjunkie.  There's two 3/16" bits and one 1/4" bit.  (I used one of the 3/16" bits to drill mine out.)  Is the consensus that we should keep the three bits together?  Separate the 3/16" bits to cover more folks?

05k20z1, I think you're up next assuming KS_Dan is covered by rogueshot.  Just PM me your mailing address.

[05k20z1]

Okay, I got the bits today and got that fool collar drilled out.

I think I got the bits that originated with Spearjunkie.  There's two 3/16" bits and one 1/4" bit.  (I used one of the 3/16" bits to drill mine out.)  Is the consensus that we should keep the three bits together?  Separate the 3/16" bits to cover more folks?

05k20z1, I think you're up next assuming KS_Dan is covered by rogueshot.  Just PM me your mailing address.

Awesome, PM sent. [emoji106]


Sent from my iPhone using Tapatalk

[KS_Dan]

Ok, I m finished and ready to ship the bit.

Who is up? KS-Dan? If so PM me you name and address please. I can ship today or tomorrow.

thx
Sean

Address sent!  Thank you!

[GLOCKCRAZZ]

Can I get on the list plz.

[CrzyMac]

Collar removed!  After reading through the posts, it looks like KS_Dan and 05k20z1 have sent their addresses.

I'll ship as soon as I receive GLOCKCRAZZ's info (PM Sent).

List:

GLOCKCRAZZ

[Vee12]

Please put me in line for the drill bit!

[Kenneth]

I have one that I'll also add to the list so people can get it done quicker.


Only thing is after we are all done with passing it around I would like it back.

So if someone wants to use it then I'm more then willing to send it just have to send it back or to someone else with the pretense of them getting it back to me.


Sent from my iPhone using Tapatalk

[KS_Dan]

I got the drill bit in the mail today, the package was opened so the mail service had a delay getting it here.  I'll get my pack drilled tomorrow or Thursday and I can send it to the next person.