« previous next »
Pages: [1]   Go Down

Author Topic: Reassemble  (Read 2606 times)

0 Members and 1 Guest are viewing this topic.

Offline Bikesroget

  • Newbie
  • *
  • Posts: 3
Reassemble
« on: July 28, 2016, 07:15:59 PM »
Hi
Just picked up my Rami
I had trouble finding the sweet spot to reinsert slidestop  to reassemble. Can someone save me some time. Simply bringing the slide to the hammer wasn't working. I know I spent way too much time. Any help is welcome. I love the Rami
Logged

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5191
Re: Reassemble
« Reply #1 on: July 28, 2016, 08:25:07 PM »
There is a small line stamped in the left side of the frame and slide towards the rear. Bringing the slide to the hammer at half cock should be close enough for you to see the mark and line them up.
Logged

Offline Ruber

  • Sr. Member
  • ****
  • Posts: 524
Re: Reassemble
« Reply #2 on: July 28, 2016, 08:54:43 PM »
Quote from: Earl Keese on July 28, 2016, 08:25:07 PM
There is a small line stamped in the left side of the frame and slide towards the rear. Bringing the slide to the hammer at half cock should be close enough for you to see the mark and line them up.
My RAMI does not have the little line and not sure which ones do, but yep, hammer at half cock, bring the slide back to that point.
Logged

Offline Bikesroget

  • Newbie
  • *
  • Posts: 3
Re: Reassemble
« Reply #3 on: July 28, 2016, 09:58:24 PM »
Thanks for your help
Logged

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5191
Re: Reassemble
« Reply #4 on: July 28, 2016, 10:03:05 PM »
Back together?
Logged

Offline Bikesroget

  • Newbie
  • *
  • Posts: 3
Re: Reassemble
« Reply #5 on: July 29, 2016, 01:04:29 AM »
Yes
I did it the first time but it took awhile. I saw on sootch00 video where he says you need to line up the right side til it is round then insert the pins.i don't think all have marks.
It seems like it took longer than it should
Thanks
Logged

Offline copemech

  • Hero Member
  • *****
  • Posts: 1676
Re: Reassemble
« Reply #6 on: July 29, 2016, 01:58:34 AM »
Rami does not have the lines, look in the hole to reassemble.
Logged

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5191
Re: Reassemble
« Reply #7 on: July 29, 2016, 10:56:22 AM »
Sorry, didn't realize Rami's aren't marked. I've handled them several times but don't own one. That's what I get for making an assumption. I wonder why they left the marks off of them when everything else gets them. Any other CZ pistols that omit the marks?
Logged

Offline Rainsong

  • Jr. Member
  • **
  • Posts: 79
Re: Reassemble
« Reply #8 on: July 29, 2016, 02:00:34 PM »
I bring the hammer back to half cocked.  Push the slide back until it just contacts the hammer.  Bingo!
Logged
Albuquerque, NM (although not really NEW, not really MEXICO!)

CZ 2075 RAMI 9mm
CZ 75B 9mm

Offline tdogg

  • Hero Member
  • *****
  • Posts: 2700
  • Two Alpha!
Re: Reassemble
« Reply #9 on: August 04, 2016, 11:45:26 AM »
Quote from: Earl Keese on July 29, 2016, 10:56:22 AM
Sorry, didn't realize Rami's aren't marked. I've handled them several times but don't own one. That's what I get for making an assumption. I wonder why they left the marks off of them when everything else gets them. Any other CZ pistols that omit the marks?

The 40P has both lines and dots that align in two different positions.  You have to use them both.  You start the slide stop at the lines then have to move the slide to align the dots while lightly pressing the slide stop in and it will pop in.

This is how I generally install a slide stop in a CZ.  I insert the slide stop partially, then slowly move the slide rearward (to align the markers if present) while applying slight pressure to the slide stop.  When things are aligned it will pop into place.  That generally happens when the slide is in close proximity to the hammer at half cock.

Cheers,
Toby
Logged
This forum rocks!
Pages: [1]   Go Up
« previous next »