Author Topic: 7510X Can Work With Threaded Barrels  (Read 857 times)

0 Members and 1 Guest are viewing this topic.

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2794
7510X Can Work With Threaded Barrels
« on: January 15, 2017, 04:40:41 PM »
We have discovered the 7510X can work perfectly with threaded barrels.  A simple angle cut using the compound feed on a lathe will allow a threaded barrel to very easily completely drop in with no additional fitting.  CGW can cut the barrel for $50.00 plus $7.00 return USPS.  So now you can have tack driver accuracy for a very reasonable cost.  Example:  bushing $60.00, CGW install $30.00, CGW machining of the barrel $50.00, return USPS $7.00 = $147.00.

A very good local machine shop should be able to do this as well.




Offline longgonedaddy

  • Full Member
  • ***
  • Posts: 397
Re: 7510X Can Work With Threaded Barrels
« Reply #1 on: January 19, 2017, 02:03:25 PM »
Will that also work with the 7580X?

Offline longgonedaddy

  • Full Member
  • ***
  • Posts: 397
Re: 7510X Can Work With Threaded Barrels
« Reply #2 on: February 13, 2017, 12:22:52 PM »
Bump for Schmeky...

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2794
Re: 7510X Can Work With Threaded Barrels
« Reply #3 on: February 13, 2017, 07:33:36 PM »
longgonedaddy,

Sorry I haven't checked this thread in a while.  To answer your question:  I don't know, yet.

 

anything