Author Topic: 10x bushing for Standard IPSC Model?  (Read 892 times)

0 Members and 1 Guest are viewing this topic.

Offline Assnolax

  • Newbie
  • *
  • Posts: 5
10x bushing for Standard IPSC Model?
« on: February 08, 2017, 12:51:17 AM »
Just order the one for the tac sport I'm assuming but want to be sure. 

Offline Assnolax

  • Newbie
  • *
  • Posts: 5
Re: 10x bushing for Standard IPSC Model?
« Reply #1 on: August 05, 2017, 09:46:00 PM »
Alright, I ordered a 10x bushing for the tac sport and installed it in my standard ipsc slide(preB Tac Sport)

First thing I noticed was how much shorter the 10x bushing is than the worn out stock bushing.  After installing the bushing there is a visible gap in the slide.  Is this how the bushing installs on the tac sports as well?


http://imgur.com/a/5B93J  pics of what I'm talking about.

Offline Scarlett Pistol

  • Hero Member
  • *****
  • Posts: 2831
Re: 10x bushing for Standard IPSC Model?
« Reply #2 on: August 05, 2017, 11:37:01 PM »
Is there any play or movement when the bushing is installed? How the barrel lock up?
"In God I trust. All others must supply data."

Offline cntrydawwwg

  • Hero Member
  • *****
  • Posts: 4805
Re: 10x bushing for Standard IPSC Model?
« Reply #3 on: August 06, 2017, 12:56:26 AM »
Call CGW, they'd know for sure.
If guns are outlawed.........
 Only outlaws will have guns.

Offline schmeky

  • Moderator
  • Hero Member
  • *****
  • Posts: 2794
Re: 10x bushing for Standard IPSC Model?
« Reply #4 on: August 06, 2017, 11:07:02 AM »
The stock bushing is almost paper thin at the rear.  We made ours slightly shorter but stiffer, resulting in more structural rigidity when compared to the OEM bushing.  Stock bushing is not heat treated, CGW bushing is heat treated to RC 56-58. 

CGW bushing is designed to be driven into the slide for a very snug fit, so there is -0- play within the slide.  Bushing ID is critical, and we old this to .0005" (one half of one thousand) so when the slide is in battery, the barrel is locked into position, which results in virtually no play at the muzzle.


Offline Joe L

  • Hero Member
  • *****
  • Posts: 5163
Re: 10x bushing for Standard IPSC Model?
« Reply #5 on: August 06, 2017, 11:34:20 AM »
Here is what I have been able to do consistently with a standard 75B slide with no changes other than the 10x bushing, and a red dot sight.  This slide was a dog with the factory bushing. 



Joe
CZ-75B 9mm and Kadet, 97B"E", two P-09's, P-07, P-10C

Offline Assnolax

  • Newbie
  • *
  • Posts: 5
Re: 10x bushing for Standard IPSC Model?
« Reply #6 on: August 06, 2017, 02:11:57 PM »
Lock up is great and definitely did away with all the slop.  Just wanted to be sure I had put in the right part.  Thank you very much.   

 

anything