« previous next »
Pages: [1]   Go Down

Author Topic: sights  (Read 2281 times)

0 Members and 1 Guest are viewing this topic.

Offline ulmapache

  • Full Member
  • ***
  • Posts: 112
sights
« on: March 12, 2017, 10:44:58 PM »
My CZ-83 in .380 (fixed sights)  shoots about 6 inches low at 7 meters...any suggestions? Thx...
Logged

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1817
  • Coat of Arms for Uherský Brod
Re: sights
« Reply #1 on: March 13, 2017, 04:13:28 PM »
Logged
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD

Offline larryflew

  • Hero Member
  • *****
  • Posts: 3421
  • Minnesota
Re: sights
« Reply #2 on: March 13, 2017, 06:17:29 PM »
Fired from fixed location like Ransom Rest or sandbags? Also have someone else shoot it and see if the same.
Logged
When did it change from "We the people" to "screw the people"?

, []]]]]]]]]]]\>
        )'_\   (
'            \ *\
'              \ _\


Larry

Minnesota shooter
and CZ fanatic
NRA life since the 70's
USAF 66-70

Why use 911 when it's faster to use 1911 or 9mm?

Offline Masonread318

  • Jr. Member
  • **
  • Posts: 29
Re: sights
« Reply #3 on: April 16, 2017, 11:43:40 PM »
It's been a while since I looked, but they sell different height sights. You may have a mismatched pair. You would have to drive the sights out and check the bottom, they will have a number on the. Kinda sounds like you have a shorter rear sight and a taller front. Or vice versa. Like I said, it's been a while since I checked into that. What I did was put a fiber optic front on mine. I had to file it down to get it to fit. My him used to be dead on but I couldn't see it and now it shoots a little low. It's been about 2 years since I've shot it due to the seat spring. I've been dreading taking it back apart to replace it. I need to replace the ejecter and seat spring.  Love the gun but it is a pain to rebuild.
Logged

Offline dlk

  • Jr. Member
  • **
  • Posts: 91
Re: sights
« Reply #4 on: April 27, 2017, 06:24:18 PM »
If you haven't tested it from a good rest and/or had a friend try it out do so before you change anything. My '83 is spot on but I had a 1911 with fixed sights which did the same thing as yours and eventually I had to change the sights. If you like the front sight on yours (the green flourescent dot works  good for me) consider getting an adjustable rear sight to make sure you get it exactly where you want. If I recall correctly, CZ 75 rear sights will work on the 83, so you should have plenty of choices without having to mill the slide.
Logged
Pages: [1]   Go Up
« previous next »