P-10Cs should be coming

[ragingbulldaily]

Any chance you might know where I can get a holster for the p10 with a tlr1 hl attached?

[whrussell21]

Any chance you might know where I can get a holster for the p10 with a tlr1 hl attached?

https://www.alexandryandesign.com/

They make the best custom Kydex holsters and have a lifetime warranty option. Each holster is made to order so it takes a couple weeks to get but they're nice. Just use the holster creater to ensure you want the TLR option. They also use real pistols for every mold so it's exact and not blue guns. They have been making P-10s kydex's for a few months now.

I am a fan of the carbon fiber and ATCS AU pattern.

[eastman]

Eastman, the one you have has to be destroyed, correct? That bites.
ragingbulldaily, very nice, very nice - I can see the texturing in the photo. I'm thinking some sandpaper would be in order, yikes. I did hear a couple of comments that replacing the small with one of the larger backstraps made a difference in that the frame wouldn't shift as much during recoil and drive the texturing into the hand. We'll see.  Glad you got a smooth trigger.

I don't know what fate has in store for it. I will be returning the FDE P-10c at the next demo event and taking home my very own standard black polycoat version. It will be going back to CZ then. I told my contact that I would really like to buy the FDE version (as well) if CZ will sell it to me. It has been in the safe for almost 2 months, and the other CZs will miss it.

[eastman]

You where exactly right guys, thanks for all your help. Matt and the other nice guy gres9 sorry if I have the names wrong. Just wanted to say thanks again, and CZ verified exactly what you said. Have any of you ever used freedom ammo? I found a deal on the site, 115 grrn new, 500 rounds for 90$ free shipping on mother's day

The Freedom Munitions 115 gr is fine in CZs.

For CZs, don't buy the SuperMatch 124 or 147gr from Freedom - the bullet will contact the rifling before the cartridge is fully chambered.

[armoredman]

I don't know what fate has in store for it. I will be returning the FDE P-10c at the next demo event and taking home my very own standard black polycoat version. It will be going back to CZ then. I told my contact that I would really like to buy the FDE version (as well) if CZ will sell it to me. It has been in the safe for almost 2 months, and the other CZs will miss it.

We wouldn't want to break up a set like that, might cause depressed guns and that would mean having to play BB King at the range. 

[eastman]

I don't know what fate has in store for it. I will be returning the FDE P-10c at the next demo event and taking home my very own standard black polycoat version. It will be going back to CZ then. I told my contact that I would really like to buy the FDE version (as well) if CZ will sell it to me. It has been in the safe for almost 2 months, and the other CZs will miss it.

We wouldn't want to break up a set like that, might cause depressed guns and that would mean having to play BB King at the range. 

Maybe they'll think the FDE P-10c spent the day outside and got a dark suntan?

[armoredman]

Put some shades on it; they'll never notice the difference. 

[ragingbulldaily]

Uh, first and foremost thank you for the information. Ok, so I'm dealing with a completely different breed here I take it, with CZ's that is?

[armoredman]

You could use a generic Glock 19+light holster, but I'd look at the one posted or call High Noon Holsters to see if they can make one for you - they are doing P-10C rigs now, and I trust them 100%.

[ragingbulldaily]

I have 135gr Hornady flexlock in the p10 right now, is that ok. I feel like I've bought some mutant I know nothing about, yikes......

[dmossman]

I shot a 8 stage USPSA match today. Third with the Steel Challenge last weekend combined with a couple trips to the range makes just over a thousand rounds thro my 10. No hiccups whatsoever. Every press of the trigger sent a round down range. Only difference today was I blacked out the rear dots to see how I liked that. Seemed to be able to pick up the front site better. That matches my normal match gun. I'll probably go with front fiber and serrated rear. I have been wanting to try XS big dots. This might make a good carry combination.
I'm tickled pink about this gun. A good addition to the P01, PCR, 75BD, and 75 match.

Sent from my SM-G930T using Tapatalk

[ragingbulldaily]

I blacked out the rear on my Glock 22 and put true bright orange on the front, made a great improvement for front sight aquzision.

[eastman]

I have 135gr Hornady flexlock in the p10 right now, is that ok. I feel like I've bought some mutant I know nothing about, yikes......

CZ 9mm pistols have a shorter leade (shorter zone in front of the chamber before the rifling starts). This improves accuracy; however some bullet shapes will be too long at full diameter and will contact the rifling before fully chambering.

The Freedom Munitions SuperMatch (both 124gr and 147gr) fails the plunk test in all of my CZ pistols (OK, I haven't tried the Scorpion). When dropping a cartridge into the barrel, it hits the rifling before fully chambering and resists spinning. No other commercial ammo that I have tried has failed the plunk test. This includes every 115 gr FMJ, all 124gr 9mm NATO or regular 9mm FMJ, Federal HST 124gr JHP, Hornady American Gunner 124 gr +P, Winchester Ranger 147gr JHP or Remington 147gr FMJ.

Regular Freedom Munitions 115 gr FMJ will run fine in the CZs (and shoots well through them).

[milq]

I have 135gr Hornady flexlock in the p10 right now, is that ok. I feel like I've bought some mutant I know nothing about, yikes......

Nah. There's a SAAMI spec in chamber length, etc. CZ typically manufactures to the shorter side of the spec, which comes into play if you reload and want the most from your reloading efforts.

I've never had any quality factory ammo fail to load and shoot in any of the CZs I've owned. I'll check chamber length on my P10 later this evening with a couple of different bullets that I reload and see how the chamber compares to my SP-01 and "SP-01 Compact".

[ragingbulldaily]

Thanks again for the ammo info. I haven't pulled the trigger on my p10 yet, I'm glad you gave me that info because I have 135 grain flexlock in right now. I was looking at the 135 grain and how deep it sat into the rifling. So out it goes. I'm really at this point more interested in getting the texture fixed on the p10 before anything. I know the gun will not be leaving my possession, I know I know, but this one will be staying!! So at this point I have emails out trying to find someone to give me a nice medium texture that looks nice as well. I brushed the front and back but it's still crazy agresive to me, and I've worked with my hands for 30+ years. And no, not in porn!