P-10Cs should be coming

[milq]

Very happy with mine and the 3 people that have handled it have all been impressed with the ergonomics and trigger. I'll admit the trigger isn't as good as the initial videos might lead folks to believe, but it's better than my G19 and I expect it will improve after some more use.
I don't see many CZ firearms in my area at all, but the numbers are increasing. A friend that shot my SP-01 last year now owns 3 CZ pistols and has a FDE P10 on order, another has purchased a CZC P09 recently.
Earlier I'd mentioned that I would check overall length for reloads...caliper battery was dead so I have to pick up some new ones.

[ragingbulldaily]

Take it for what it's worth, I did the plunk and twist test on my p10 with Hornady 135 flexlock and it failed. Just need to get know the gun and what's good to feed it.

[BobcatAZ]

Good news in the General forum. Looks like CZ may be building a US factory so the longest we should have to wait for a P10C is about 2 years! Just kidding about the 2 years but has anyone heard when the next batch of black ones might be coming? Really appreciate all those who have posted their impressions of the gun and what they have done to improve the performance.

[BobcatAZ]

Walked into the Pistol Parlor here in Mesa AZ about 2 hrs ago and sarcastically asked if they had seen any P10C's. "We Had 4 and I think there is 1 left" said the sales clerk. I thought he was joking but when he pulled it out from under the counter the rest is history!  As I sit here fondling  my belated birthday present (5-19) to myself I am truely impressed by the obvious quality. Even fits the cheap Glock Sport Combat holster I have been using for my G27. Will be looking for something  a little more substantial and need to pick up some 9mm ammo. Any recomendations for either would be appreciated.

[Indy_Tim]

I've been playing around with the plunk test and find that Sig 147g SD ammo has mixed results.  One round passes and the next does not.  Just barely hangs in the barrel.  Critical Duty passes as does 147g HSTs.  That's happy news for me since I like to run the 147g HSTs where ever possible.

[BobcatAZ]

Couple questions for the P10C experts. Just picked up mine today and noticed there is a little "step like " point in the take up right before the wall on the trigger. Anyone else experience this? Does CZ have a lube that they recomend and aside from the slide rails, what gets lubed? CZ's owners manual leaves a little to be desired compared to others.

[Sooltauq]

Ordered mine tonight for delivery next week, P10C FDE, and looking forward to it.

[Joe L]

Couple questions for the P10C experts. Just picked up mine today and noticed there is a little "step like " point in the take up right before the wall on the trigger. Anyone else experience this? Does CZ have a lube that they recomend and aside from the slide rails, what gets lubed? CZ's owners manual leaves a little to be desired compared to others.

On mine, the trigger safety would hang slightly on the frame if I didn't have my trigger finger exactly perpindicular to the blade.  After clearing the frame with the trigger safety, no significant step until just before the trigger bar dropped to release the firing pin.  I think (from Earl's videos) that is the trigger bar in contact with the disconnector.  Might be a little roughness at that point of contact.  Mine is not bad there, but I expect some variation from pistol to pistol.  I haven't taken my frame parts apart to see yet. 

As far as lube, it doesn't look to me like it is any different than the hammer guns==light grease on the rails and barrel, some oil in the frame parts. 

Joe 

[armoredman]

It appears that I may have a P-10C in my near future. We'll see.

[HazMatt187]

Couple questions for the P10C experts. Just picked up mine today and noticed there is a little "step like " point in the take up right before the wall on the trigger. Anyone else experience this? Does CZ have a lube that they recomend and aside from the slide rails, what gets lubed? CZ's owners manual leaves a little to be desired compared to others.

On mine, the trigger safety would hang slightly on the frame if I didn't have my trigger finger exactly perpindicular to the blade.  After clearing the frame with the trigger safety, no significant step until just before the trigger bar dropped to release the firing pin.  I think (from Earl's videos) that is the trigger bar in contact with the disconnector.  Might be a little roughness at that point of contact.  Mine is not bad there, but I expect some variation from pistol to pistol.  I haven't taken my frame parts apart to see yet. 

As far as lube, it doesn't look to me like it is any different than the hammer guns==light grease on the rails and barrel, some oil in the frame parts. 

Joe

I am new to online forums, so please excuse me if Im not doing this right....I just bought a P10c and after about 50 rounds through it I noticed that the trigger safety dingus gets hung up on the frame if not pressed perfectly. I see somebody else has had this issue. I like the ergos of the P10c over my G19, but if this is a normal thing for the P10 I am probably going to get rid of it. Anybody else having the issue with the trigger dingus? Is it supposed to be like this or should I send it to CZ? I tried calling them, but of course they are already closed. Thanks!

[armoredman]

Star with calling CZ-USA tomorrow and ask for the gunsmith. I have noticed if I press the trigger way off to one side the trigger safety will get hung up. I have been told there is a quick fix for those who have skills/tools - I have neither. On the other hand, after about 300 rounds I didn't feel it again, and it never once happened during actual shooting, only dry fire. But if yours is wide enough that it hangs up on normal firing, I'd have CZ look at it and narrow it down a skosh or two.

[niblerrn]

Perhaps one of the people with the skills and tools could post a short tutorial on how to fix the issue?

I'm slowly building up my library of posts and videos on everything P10C.  Love the pistol and all the people with the skill who are willing to share their knowledge.  Keep it up!  It is very much appreciated.

Nick

[jewhj14]

I'm having the same trouble with trigger safety hanging if finger not positioned perfectly. At first I thought it was just me because none of the reviews I've seen have mentioned it. I'm glad to see that others have experienced this too. I like CZ and hope there is some remedy. I know it's the same old song but I have my Glocks and I've never felt this.

[SI VIS PACEM PARRABELLUM]

I'm having the same trouble with trigger safety hanging if finger not positioned perfectly. At first I thought it was just me because none of the reviews I've seen have mentioned it. I'm glad to see that others have experienced this too. I like CZ and hope there is some remedy. I know it's the same old song but I have my Glocks and I've never felt this.

There is a remedy just use the search feature here or read through the threads. A couple guys have cured that little issue already. By the way I buy used glocks and melt them into trash bags.

[armoredman]

Now I know why Hefty stock went up...