Author Topic: Ruger Mark 4 Recall  (Read 3710 times)

0 Members and 1 Guest are viewing this topic.

Offline 1SOW

  • Hero Member
  • *****
  • Posts: 15024
  • GO GREEN - Recycle 9MM
Ruger Mark 4 Recall
« on: June 12, 2017, 01:24:25 AM »
Saw this:  Mark IVTM Recall
Ruger recently discovered that all Mark IV™ pistols (including 22/45™ models) manufactured prior to June 1, 2017 have the potential to discharge unintentionally if the safety is not utilized correctly.  In particular, if the trigger is pulled while the safety lever is midway between the "safe" and "fire" positions (that is, the safety is not fully engaged or fully disengaged), then the pistol may not fire when the trigger is pulled.  However, if the trigger is released and the safety lever is then moved from the mid position to the "fire" position, the pistol may fire at that time.


Offline codj51

  • Newbie
  • *
  • Posts: 6
Re: Ruger Mark 4 Recall
« Reply #1 on: July 14, 2017, 11:37:08 AM »
Does recall apply if a Volquartsen trigger group has been installed?

Offline Uriel67

  • Jr. Member
  • **
  • Posts: 50
Re: Ruger Mark 4 Recall
« Reply #2 on: December 15, 2018, 09:57:05 AM »
Thanks for posting. Looks like mine will be going back...

Offline steerclr

  • Full Member
  • ***
  • Posts: 421
Re: Ruger Mark 4 Recall
« Reply #3 on: December 15, 2018, 08:23:22 PM »
Looks like you only need to send the grip section to simplify the process.  Mark 1 ,2 , & 3 not affected.

https://ruger.com/dataProcess/markIVRecall/