« previous next »
Pages: [1]   Go Down

Author Topic: Anyone try to paint a Tristar T100?  (Read 1419 times)

0 Members and 1 Guest are viewing this topic.

Offline fileophile

  • Newbie
  • *
  • Posts: 24
Anyone try to paint a Tristar T100?
« on: July 05, 2017, 07:26:18 PM »
I tried, after degreasing the part thoroughly.  But the original finish  is some Teflon like coating and the paint slides right off after drying. Wondering if anyone else has had any luck.
Logged

Offline jwc007

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8731
Re: Anyone try to paint a Tristar T100?
« Reply #1 on: July 06, 2017, 02:07:03 AM »
Quote from: fileophile on July 05, 2017, 07:26:18 PM
I tried, after degreasing the part thoroughly.  But the original finish  is some Teflon like coating and the paint slides right off after drying. Wondering if anyone else has had any luck.

From what I have read, the original Canik finish is a form of CeraKote.  You probably won't be able to get it to hold another finish without flattening the original finish or removing it.

Forum Member Brian Ahearn works with CeraKote and he would probably be the best one to advise you, should he answer this thread.
Logged
"Easy is the path to wisdom for those not blinded by ego." - Yoda


For all of those killed by a 9mm: "Get up! You are not dead! You were shot with a useless cartridge!"

Offline Brian Ahearn

  • Hero Member
  • *****
  • Posts: 1729
    • Easton Firearms Refinishing
Re: Anyone try to paint a Tristar T100?
« Reply #2 on: July 06, 2017, 01:10:23 PM »
Well the pistol needs to be stripped all parts removed , we are talking cerakote here, then the original finish is media blasted off with 100 grit aluminum oxide media  parts are degreased again coated and baked then reassembly. Degreasing after after disassembly is the first step in the process. If you have any questions I can be reached at 610-252-5334 est time.
Logged
Easton Firearms Refinishing Owner/Operator
NRA Pistol Instructor
CZ Collector

Offline Brian Ahearn

  • Hero Member
  • *****
  • Posts: 1729
    • Easton Firearms Refinishing
Re: Anyone try to paint a Tristar T100?
« Reply #3 on: July 06, 2017, 04:31:18 PM »
 By the way I have refinished a lot of Canik and Tristar products.
Logged
Easton Firearms Refinishing Owner/Operator
NRA Pistol Instructor
CZ Collector

Offline fileophile

  • Newbie
  • *
  • Posts: 24
Re: Anyone try to paint a Tristar T100?
« Reply #4 on: July 07, 2017, 05:13:51 PM »
How much do you charge?
Logged

Offline Brian Ahearn

  • Hero Member
  • *****
  • Posts: 1729
    • Easton Firearms Refinishing
Re: Anyone try to paint a Tristar T100?
« Reply #5 on: July 08, 2017, 07:40:40 AM »
send me a private message , it's not proper for me to quote on the forum. you can also go to my website  www.eastonfirearmsrefinishing.com
Logged
Easton Firearms Refinishing Owner/Operator
NRA Pistol Instructor
CZ Collector

Offline schmeky

  • Hero Member
  • *****
  • Posts: 2897
Re: Anyone try to paint a Tristar T100?
« Reply #6 on: July 08, 2017, 05:22:25 PM »
Brian does a lot of cerakote and he knows the Canik's as good or better than anyone.  I highly recommend him.  Great personable guy as well.
Logged
Pages: [1]   Go Up
« previous next »