« previous next »
Pages: [1]   Go Down

Author Topic: New member...lots of good info here need a little help on sights  (Read 2506 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim E

  • Jr. Member
  • **
  • Posts: 71
New member...lots of good info here need a little help on sights
« on: October 23, 2017, 07:22:52 PM »
First, thank all of you who have contributed their views and information on this forum. Over the last two weeks I read every line back to 2004. Quite a bit of info on the Rami to say the least. So...I just picked up a new Rami in 9mm (2017 safety model). This will be my first CC pistol by choice (if I can pass the stringent application process here in CA). Only gripe I have on the Rami is the sights. I've looked at all the factory options and the Big Dot Sights. None of which suit me however, the True Glow TFX type might work. From what I have read here on the forum, True Glow isn't interested in producing anything for this model.

I know this subject has been covered many times but, are there any other options beside re-cutting the slide? I would prefer the fiber optic/tritium night type just can't find anything.
Logged

Offline Googe1227

  • Hero Member
  • *****
  • Posts: 3496
  • Chiraq CZ Fan
Re: New member...lots of good info here need a little help on sights
« Reply #1 on: October 23, 2017, 08:22:14 PM »
Greetings from Chicago!

I feel your pain. The only sight set that I have come across that doesn't require recutting the slide is the MeproLight set. I have these on my Rami and they are great. But I would love a tridium/FO combo as well.
Logged

Offline Rainsong

  • Jr. Member
  • **
  • Posts: 79
Re: New member...lots of good info here need a little help on sights
« Reply #2 on: November 04, 2017, 08:55:19 AM »
Same here.  Meprolite sights aren't much better than stock IMO.  Only aftermarket sights I use is TFX tru-glo with fiber optic and tritium (on my M&P Shield).  Until they're available for the RAMI, I will stick with stock and put a dab of hi-vis yellow paint on the front sight.  The more people that email Tru-glo requesting, the better chance of having them make them for the RAMI, but I wouldn't hold my breath.
Logged
Albuquerque, NM (although not really NEW, not really MEXICO!)

CZ 2075 RAMI 9mm
CZ 75B 9mm

Offline rdcinhou

  • Hero Member
  • *****
  • Posts: 1817
  • Coat of Arms for Uherský Brod
Re: New member...lots of good info here need a little help on sights
« Reply #3 on: November 04, 2017, 03:57:56 PM »
My CZ 2075BD RAMI that I purchased today came from the factory with Tru Dot night sights.  They are labeled "MH3".
« Last Edit: November 04, 2017, 04:58:09 PM by rdcinhou »
Logged
CZ24/27/38/40P/45/52, Vzor 50/70,75BΩ,75D Compact,P01/07/09,P10M/S/C/F(9mm,.45), Phantom,SP01 Tactical,Shadow 2 (Blue,Urban Gray), 82/83/85 PreB, 97BE,97BD,97BDE,100,1911A1, 2075D RAMI,452 American,550 Urban Counter Sniper,805 Bren S1,Drake G2,Duo,Z,vz24 8mm Mauser,FK 7.5 BRNO Field Pistol, PSD

Offline bradleyvail

  • Newbie
  • *
  • Posts: 6
Re: New member...lots of good info here need a little help on sights
« Reply #4 on: March 24, 2018, 07:41:40 PM »
I'm wishing TruGlo would make TFX-Pro for the RAMI. They are awesome on the CZ 75. I joined many others in emailing TruGlo re: adding the RAMI to their offerings.
Logged

Offline mecenas

  • Full Member
  • ***
  • Posts: 147
Re: New member...lots of good info here need a little help on sights
« Reply #5 on: March 25, 2018, 10:03:23 AM »
I have a decocker model that came with a set of night sights. Factory Tru-dot night sights are not nearly as bright as some other manufacturers and I like front fiber optic anyway, so I replaced the front sight with Dawson fiber optic and now the set-up is really good.

This will have to wait until somebody comes up with a set of night/fiberoptic sight combo.
Logged
Pages: [1]   Go Up
« previous next »