Mixing trigger pin with...

[briang2ad]

 Folks: is it possible to mix up the trigger return spring in in the mainspring housing in? Please don?t ask .

[SlvrDragon50]

A little confused what you mean mix up? Like you put the TRS where the mainspring housing goes?

Oh, just realizing you are talking about the pin. I'm gonna say no, but I've never mixed those up before, so I'm not 100% sure. They look to be of similar diameter, but I believe the length is quite different as well as the shape of the pin.

[M1A4ME]

If you get the chance, order a floating trigger pin from CGW.  It definitely looks different.

The factory trigger pins, if I recall correctly, have are heavily indented on one end, almost like they are made that way to help keep the punch from slipping/bouncing off the end of the pin.

[SlvrDragon50]

If you get the chance, order a floating trigger pin from CGW.  It definitely looks different.

The factory trigger pins, if I recall correctly, have are heavily indented on one end, almost like they are made that way to help keep the punch from slipping/bouncing off the end of the pin.

The floating trigger pins from CGW don't fit the P07 (and the P07 comes with a floating trigger pin already I think... I should know considering I've taken apart my P07, but I can't remember).

[Tok36]

Folks: is it possible to mix up the trigger return spring in in the mainspring housing in? Please don?t ask .

I am not entirely clear on your question or the model you are asking about. I assume that your question is regrading the CZ P-Series and that you are asking if the Trigger Pin (Part#30) can be swapped with the Main Spring Plug Pin (Part#32). The P-Series Trigger pin is significantly longer that the Main Spring Plug Pin. I believe that it would be hard to miss if they were mixed up.