« previous next »
Pages: [1] 2   Go Down

Author Topic: Changing P10c striker  (Read 3194 times)

0 Members and 3 Guests are viewing this topic.

Offline ssqman

  • Full Member
  • ***
  • Posts: 325
Changing P10c striker
« on: February 16, 2018, 01:27:29 PM »
I notice a lot of people are switching to the CGW striker. Are you doing this because you just like to tinker/modify/upgrade or do you actually feel uncomfortable using the P10 for defense with the factory striker?
Logged
No, Google is not my friend

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: Changing P10c striker
« Reply #1 on: February 16, 2018, 01:42:57 PM »
I changed mine because the factory striker tip broke off after shooting only 200 rounds. While CZ Warranty Service did mail me a replacement striker I felt more confident in the one made by Cajun Gun Works because it is tool steel and not MIM.
It could have simply been a bad batch of factory strikers but since I carry my P-10 every day I feel more confident with a tool steel striker instead of the factory MIM.
« Last Edit: February 16, 2018, 01:44:50 PM by cremaley »
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline 2morechains

  • Hero Member
  • *****
  • Posts: 1113
Re: Changing P10c striker
« Reply #2 on: February 16, 2018, 05:56:57 PM »
Quote from: ssqman on February 16, 2018, 01:27:29 PM
I notice a lot of people are switching to the CGW striker. Are you doing this because you just like to tinker/modify/upgrade or do you actually feel uncomfortable using the P10 for defense with the factory striker?

All of the above?  LOL, it?s peace of mind. 
Logged

Offline r1dramma

  • Jr. Member
  • **
  • Posts: 46
Re: Changing P10c striker
« Reply #3 on: February 16, 2018, 06:47:21 PM »
Well over 2000 rnds and It's been my daily carry since my first range trip. I honestly don't have any specific reason for the swap. The pics below of the original striker shows some wear but I don't see anything wrong with it. It looks like it has a flat spot but it doesn't.


Sent from my SM-N950U using Tapatalk

Logged

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5191
Re: Changing P10c striker
« Reply #4 on: February 16, 2018, 07:42:46 PM »
Schmeky says the OEM striker is responsible for much of the grittiness in the OEM trigger pull. Reason enough for me.
Logged

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: Changing P10c striker
« Reply #5 on: February 16, 2018, 10:45:46 PM »
Quote from: Earl Keese on February 16, 2018, 07:42:46 PM
Schmeky says the OEM striker is responsible for much of the grittiness in the OEM trigger pull. Reason enough for me.

Second that!
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline JACK_89

  • Jr. Member
  • **
  • Posts: 51
Re: Changing P10c striker
« Reply #6 on: February 17, 2018, 03:19:54 AM »
The tip of my striker broke as well.  cz replaced it, but i feel more comfortable with the cgw striker.  If i'm not mistaken, the OEM is MIM part, and i personally don't like that. 
Logged

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: Changing P10c striker
« Reply #7 on: February 17, 2018, 09:22:03 AM »
Quote from: JACK_89 on February 17, 2018, 03:19:54 AM
The tip of my striker broke as well.  cz replaced it, but i feel more comfortable with the cgw striker.  If i'm not mistaken, the OEM is MIM part, and i personally don't like that.

You are absolutely correct. The stock striker is a MIM part and I don't like that either.
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline ssqman

  • Full Member
  • ***
  • Posts: 325
Re: Changing P10c striker
« Reply #8 on: February 17, 2018, 12:11:18 PM »
I guess I will get one for the trigger improvement and keep the OEM for a spare. Gotta order some other spare springs and pins from them anyway. Plus the peace of mind that was mentioned.
Logged
No, Google is not my friend

Offline cremaley

  • Sr. Member
  • ****
  • Posts: 798
  • Retired but not forgotten
Re: Changing P10c striker
« Reply #9 on: February 17, 2018, 02:25:25 PM »
You won't be sorry. Every time I shot my P-10 with the factory striker I was concerned about the trip breaking off again. Now that I changed to the CGW striker it never enters my mind.
Logged
CZ 10-PC 9mm (HBI Trigger, CGW Striker 3lb spring, GGI Stainless Guide Rod 15lb spring)
Sig Sauer P365 9mm
Sig Sauer P320 X Carry 9mm
Springfield 911 .380
"Remember the first rule of gunfighting...have a gun"-Jeff Cooper

Offline Rickytick

  • Hero Member
  • *****
  • Posts: 1254
Re: Changing P10c striker
« Reply #10 on: February 17, 2018, 10:55:44 PM »
Does the CGW striker change the feel of the trigger pull at all?
Logged

Offline JACK_89

  • Jr. Member
  • **
  • Posts: 51
Re: Changing P10c striker
« Reply #11 on: February 18, 2018, 03:33:25 AM »
Initially, I thought my trigger felt heavier after swapping to the CGW striker, but I think it was all in my head.  With the new striker I'm getting a pull of about 4 lbs 10 oz with my lyman trigger pull gauge.    If I could remember where I put my OEM striker I would compare, but I can't find it.
Logged

Offline Earl Keese

  • Hero Member
  • *****
  • Posts: 5191
Re: Changing P10c striker
« Reply #12 on: February 18, 2018, 07:33:39 AM »
Quote from: Rickytick on February 17, 2018, 10:55:44 PM
Does the CGW striker change the feel of the trigger pull at all?
See post #4 above.
Logged

Offline Rickytick

  • Hero Member
  • *****
  • Posts: 1254
Re: Changing P10c striker
« Reply #13 on: February 18, 2018, 09:58:47 AM »
I read #4,  I like more than one opinion.
Logged

Offline watchluvr4ever

  • Jr. Member
  • **
  • Posts: 49
Re: Changing P10c striker
« Reply #14 on: February 18, 2018, 10:44:03 AM »
I agree with the opinion that the striker has a lot to do with the grittiness of the trigger pull. I lightly polished mine by hand using simichrome polish and it actually felt noticeable. I don't know if this grittiness is because of friction from the spring rubbing the striker or other surface. I'm not sure how the finish is on the CGW striker, but I would guess if it's not polished it would to some degree effect the feel.
Logged
Pages: [1] 2   Go Up
« previous next »