Author Topic: The Ruger MKII/III/22/45 assembly/diss. nightmare is over.  (Read 7199 times)

0 Members and 1 Guest are viewing this topic.

KingPolymer-III

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« on: July 21, 2005, 06:53:49 PM »
Thank God!!!!!!  Its about time.  A friend of mine who is also a competition bullseye shooter, turned me on to this.  There is a God!!!

www.majesticarms.com/ruger22.html

Walt-Sherrill

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #1 on: July 22, 2005, 04:22:05 AM »
Waste of money.  (This sort of device has been round for about 15 years, by the way.)

Go to The High Road, in the Semi-auto section, and you'll find a link to a very informative take-down site.  

You can strip a Ruger MK II or III in 15 seconds and reassemble in 30 seconds once you've seen it done properly, and you pay attention to the position of the hammer strut when reinstalling the main spring assembly.

(This is explained in the owner's manual, but its not easy to understand.)

KingPolymer-III

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #2 on: July 22, 2005, 04:23:27 AM »
Thanks for the advice, but what is high road? links?

Walt-Sherrill

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #3 on: July 22, 2005, 04:26:29 AM »
www.thehighroad.org[

I just looked it up. Here the MK assembly/disassembly link:

www.1bad69.com/ruger/field_strip.htm

Click on one of the MPEGS.

CZJedi

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #4 on: July 22, 2005, 06:37:06 AM »
If I saw this two years ago, I would not have sold mine!   >D

Walt-Sherrill

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #5 on: July 22, 2005, 05:29:30 PM »
I bought a Kadet Kit.  I had a stainless MK Target Competition slabside with the long barrel (6 7/8"?)  Great gun.  But the Kadet Kit shot right with it.  I don't miss the Ruger.
 
I traded the Mk II even for a Witness Sport Long Slide  in .45.  (The guy who had the .45 loved shooting, but was having a real problem with arthritis in his hands.)  He was happy, and I thought I got a great deal.  It took months before I got the trigger on the SLS right, though.

Its a nice gun.

KingPolymer-III

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #6 on: July 22, 2005, 05:59:37 PM »
So far my most accurate .22 target pistol is the Ruger MKIII22/45


Offline MontanaCZ

  • Sr. Member
  • ****
  • Posts: 265
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #7 on: July 26, 2005, 08:48:43 AM »
I never had a problem with taking my MK II apart and back.  I did see those kits, but never got around to getting one.

I used to cut my finger on one spot for a long time, but that is something different.. :)

-montanacz

Offline Golddogman

  • Sr. Member
  • ****
  • Posts: 201
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #8 on: July 26, 2005, 09:05:08 AM »
I've had a few Rugers, all with sweet triggers and excellent accuracy, and I liked the looks and heft of them. The safety was too small and too cranky to use. Reliability was usually OK, but one would go into a double-feed-and-no-eject mess that had three cases crammed into the chamber.

Even if they all had been 100%, the takedown still would have put them in the Classifieds. Yes, I read the instructions, practiced, got good at it, yadda yadda, but it was still a pain. At any time someting would go awry and I'd have to start over, not to mention gouging the grip frame with paperclips and other instruments of gloss destruction.

A couple required - I'm not making this up - a baseball bat to get the barrel off the frame.

All of them repeatedly shook the front sight screw loose, and the aluminum rear sight adjustment screws were so small and soft that no screwdriver made could keep them pristine.

No thanks. My Kadet is heaven next to to the Rugers.

n-98-Joes

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #9 on: July 26, 2005, 09:12:27 AM »
I've never had a problem with reassembling mine after I did it the first time. The position of the hammer and strut are the key. Now it's an easy procedure.

My MKII Gov't Target model is very accurate. More accurate than I am, for sure. It's a pleasure to shoot and cheap ammo is always a plus.

KingPolymer-III

  • Guest
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #10 on: July 26, 2005, 07:24:47 PM »
I am glad you guys are shooting .22s, its a testament to the quality of the membership here.  Alot of so called "good" shooters suffers from testosterone overload and won't shoot anything less than 9mm.  I quickly find out at the range that they can't hit the broad side of a barn.  Almost all experienced competition and combat shooters,  shoot .22s and own a few as well as practice with them regularly and transition.  They are essential learning platforms and training for both novices and experienced shooters.  The next time somebody tells you that a .22 is useless, invite them to the range and you will quickly find out how well they shoot or how well they DON'T.  Testosterone overload is for the small minded.  
  Let me share a quick story with you.  I was in a gun shop the other day and a small woman came in looking for a self defense gun, quickly ,the hillbillies in the shop started recommending a 2 inch snub nosed .357.  She looked frightened to death.  I bet she could not handle the recoil of a .32 much less a .357 and she told them she had never shot a gun in her life,  as she started browsing,  I approached her subtly and gave her my name and phone number, told her that I was a competition shooter and that it was essential that she come out to the range with me and shoot some of my .22s first and that she committ $250 to get a basic Ruger MKII or III 4.75 incher and practice and adapt to recoil with that.  I gave her a few pamphlets from my NRA instructor class and also a few brochures on safety and ballistics,etc.  She promised to call and come out first.  I told her that men would try to impress her with bravado ,but that the truth and experience lie with training.  I think a light went on in her head, but I have not heard anything for a few days.  I bet she went back and purchased a .38 or a .357,but God knows I am trying to help folks, as long as the Lord is watching.

Offline CanuckZ

  • Sr. Member
  • ****
  • Posts: 234
The Ruger MKII/III/22/45 assembly/diss. nightmare is over.
« Reply #11 on: August 06, 2005, 07:32:13 AM »
Reassembling is a PAIN.  Did that last night.  What is easy is my $15 Beretta 948.



http://www.angelfire.com/vt/milsurp/beretta34.html